Scooter / Moto

Accessoires

Roues Customs

Meilleures ventes

Nouveaux produits

Promotions

Suspensions

Suspensions // Forks

  • CAD$ 144.99 In stock

    Reference: CMO_7_1500_Raw

    Manufacturer: Composimo

    Front Scooter Fork Adapters for the Honda Grom! These adapters are what you need if you want to bring a whole new look and aggressive feel to your Honda GROM! The Scooter Fork Adapters allow you to install an front fork RRGS/NCY Ruckus-style Fork Assembly on your Grom. ***Warning: This setup WILL require a decent bit of modification, and because of the...

    CAD$ 144.99
    In stock
  • CAD$ 219.99 In stock

    Reference: ST-LOWFK-BK

    Manufacturer: Ruckhouse

    We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...

    CAD$ 219.99
    In stock
  • CAD$ 219.99 In stock

    Reference: ST-LOWFK-AL

    Manufacturer: Ruckhouse

    We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...

    CAD$ 219.99
    In stock
  • CAD$ 219.99 In stock

    Reference: ST-LOWFK-RE

    Manufacturer: Ruckhouse

    We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...

    CAD$ 219.99
    In stock
  • CAD$ 292.99 In stock

    Reference: 1000-1336.6

    Manufacturer: NCY

    These NCY fork tubes provide a smoother ride while lowering your front end 51mm! Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with our front Hub, 12x8 front wheel, Adelin 220mm Disc Brake, Adelin Caliper mount and Adelin 4 Pistons Caliper. Fork lenght : 330mm /...

    CAD$ 292.99
    In stock
  • CAD$ 114.99 Out of stock

    Reference: RH-181

    Manufacturer: Ruckhouse

    These Ruckhouse front Fork adapters will drastically lower the front end and work great with the shock lowering brackets giving the bike a whole new look. Comes with fork adapters and a spacer kit which properly centers the stock rim and caliper. These adapters will not work with the larger OEM Ruckus forks or ATR These are designed to install in place of...

    CAD$ 114.99
    Add to cart More
    Out of stock
  • CAD$ 137.99 In stock

    Reference: RH-184

    Manufacturer: Ruckhouse

    ***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75″ riser and use bars with a lower rise than stock, or use our “RaceBars” handlebar setup which was designed specifically around this lowering kit!*** Its FINALLY Here! After a lot of testing of various components, the 2″ Front Fork Lowering Kit for...

    CAD$ 137.99
    In stock
  • CAD$ 149.99 In stock

    Reference: RH-185

    Manufacturer: Ruckhouse

    ***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75″ riser and use bars with a lower rise than stock, or use our “RaceBars” handlebar setup which was designed specifically around this lowering kit!*** Its FINALLY Here! After a lot of testing of various components, the 2″ Front Fork Lowering Kit for...

    CAD$ 149.99
    In stock

Suspensions // Accessories

  • CAD$ 43.99 In stock

    Reference: TRS-SEBS-AL

    Manufacturer: TRS

    Looking for a way to extend your TRS Slip-in Stretch Kit even further?? Want a nice upgraded option to the bolt that is included in the kit? Check out the TRS Billet Stoppers! These Billet Machined Aluminum Stoppers have an indent on the back so that once installed, it’s possible to run with the bolt in the forward position or rear position without...

    CAD$ 43.99
    In stock
  • CAD$ 343.99 In stock

    Reference: RH-176

    Manufacturer: Ruckhouse

    Complete Bolt-in stretch Kit for Honda Grom / MSX125 with chain and chain breaker tool. All of the brackets for this kit are Billet Aluminum to match the quality and awesomeness of the rest of the kit… even the little Spanner wrench that is included for adjustments! Made right here in the USA. Stop paying high prices for the same product when you can get...

    CAD$ 343.99
    In stock
  • CAD$ 78.99 In stock

    Reference: RH-177

    Manufacturer: Ruckhouse

    Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...

    CAD$ 78.99
    In stock
  • CAD$ 84.99 In stock

    Reference: RH-178

    Manufacturer: Ruckhouse

    Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...

    CAD$ 84.99
    In stock
  • CAD$ 78.99 In stock

    Reference: RH-179

    Manufacturer: Ruckhouse

    Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...

    CAD$ 78.99
    In stock
  • CAD$ 84.99 In stock

    Reference: RH-180

    Manufacturer: Ruckhouse

    Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...

    CAD$ 84.99
    In stock
  • CAD$ 27.99 In stock

    Reference: RH-183

    Manufacturer: Ruckhouse

    Lost your tool like many others. We now offer the Billet Aluminum Slip-in Stretch Adjuster/Spanner available separately, Functions as spanner, axle nut wrench, and built-in-bottle-opener!!! This tool is small, fits in the palm of your hand easily.

    CAD$ 27.99
    In stock
  • CAD$ 244.99 In stock

    Reference: 1000-1388

    Manufacturer: NCY

    CAD$ 244.99
    In stock
Résultats 1 - 1 sur 1.
  • CAD$ 49.99 En stock

    Référence: TRS-SEBS-BK

    Fabricant: TRS

    Vous cherchez un moyen d’étendre votre kit d’extension Slip-in TRS encore plus loin? Vous voulez une belle option améliorée pour le boulon inclus dans le kit? Découvrez les arrêts de billettes TRS! Ces bouchons en aluminium usiné par billettes ont un retrait à l’arrière de sorte qu’une fois installés, il est possible de courir avec le boulon en position...

    CAD$ 49.99
    En stock
Résultats 1 - 1 sur 1.