No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Reference: TRS-RPP041-1
Brand: TRS
If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate. Why spend $$$$ on the big stuff and leave the little stuff out. Made from 6160 Billet Aluminum comes with...
Reference: RPR-STKGC/AA
Brand: rPRO
Step-Tone series is our latest brainchild in our line of billet parts. Offering assorted anodized colors with two-tone combinations, gives the end user a more creative color palette to work with, thus achieving the best color scheme possibilities for their builds.
Reference: 1200-1027.10
Brand: NCY
Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1500 rpm compression spring is specifically for the GY6. Measurements: Wire Diameter: 4.2mm /...
Reference: RH-173
Brand: Ruckhouse
Complete Front Hub for Honda Ruckus with Ruckhouse brake disc adaptor. Installation Note: When putting the center axle, some of these are not fitting due to the center bar inside the hub being a hair too small. Hitting the axle with a hammer will knock out bearing. Remove center piece and reinstall bearing. This piece is not needed anyways.
Reference: TRS-HRC0512
Brand: TRS
Looking to re-wire or shortening the wire harness here's the kit. Super Hard to find. Comes in 1 bag all ready to go.
Reference: TRS-FBL30
Brand: TRS
Black stainless brake line with chrome straight fitting and 70 degree chrome banjo fitting on other end. Measures 29 inches in total. Perfect fit for those RRGS/Adelin front end kits. don't have excess line showing. really clean look.
Reference: TRS-RHB014/AL
Brand: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2017+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...
Reference: BM005922
Brand: Stylepro
Reference: P12613010001
Brand: Scootertuning.ca
Reference: 366941
Brand: Malossi
High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...
Reference: 669417
Brand: Malossi
The HAT weights are very durable and self lubricating. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)
Reference: IRC01-00
Brand: IRC
IRC high quality dual-Purpose scooter tires that provide good traction on street.
Reference: SCT-GA001
Brand: Scootertuning.ca
Replacement reed valve gasket for all Minarelli Horizontal engines.
Reference: SCT-0800
Brand: NCY
In order to offer optimal handling, a dragrace handlebar should be nearly straight. Only the handlebar ends are slightly bent in order to provide the necessary comfort for the wrists. The handlebar may also be shortened according to your requirements.
Reference: MF55.150
Brand: Motoforce
Budget weights by Motoforce, choice of weights. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)
Reference: BR8HS-4322
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: 242.40
Brand: Polini
Polini has revised and expanded its range of roller kit made for Scooter Variator. The set consists of 4x6 cores and shells made of very wear-resistent plastic that is not affected by temperature changes. The set comes in a shatter-proof box.
icon
For all order over $199.00
icon
15 days for return
icon
2 days and Overnight
icon
Safe shopping guarantee