Liste des produits du fournisseur FLP

• 

  CAD$ 12.99 Disponible

  Référence: FLP-013

  Fabricant: FLP

  

  Adapteur D'écrous de Roue FLP Aluminium

  Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.

  CAD$ 12.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 16.99 Disponible

  Référence: FLP-014

  Fabricant: FLP

  

  Adapteur D'écrous de Roue FLP Noir

  Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.

  CAD$ 16.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 22.99 Disponible

  Référence: FLP-022

  Fabricant: FLP

  

  Aluminium Frame Cap FLP Spike CNC Aluminium Honda Ruckus

  Chances are you stock frame caps already fell off. These billet caps have large rubber bands to keep them tight. Plug and play. CNC lathe finished.

  CAD$ 22.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 26.99 Disponible

  Référence: FLP-023

  Fabricant: FLP

  

  Aluminium Frame Cap FLP Spike CNC Black Honda Ruckus

  Chances are you stock frame caps already fell off. These billet caps have large rubber bands to keep them tight. Plug and play. CNC lathe finished.

  CAD$ 26.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 42.99 Disponible

  Référence: FLP-003

  Fabricant: FLP

  

  Aluminium Frame Cap with Signal FLP CNC Aluminium Honda Ruckus

  New turn signal frame caps from FLP these only work with Honda ruckus that are not using the stock engine mount location. You will need to bridge your turn signal wires to these signals.Machined 6061 housing. Large o ring to prevent falling out with vibration. 12V dot Led amber signals

  CAD$ 42.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 73.99 Rupture de stock

  Référence: FLP-005

  Fabricant: FLP

  

  Billet Step Rails FLP Lusso CNC Aluminium Honda Ruckus

  Our newest edition to our Lusso line up. Billet side rails with open pockets to show case you nee paint and contrast the CNC machined aluminum. 3/8 risers are included to slightly lift the rails so you don’t scratch your tank. These do clear the new ncy gas tank covers

  CAD$ 73.99

  Ajouter au panier Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 37.99 Disponible

  Référence: FLP-008

  Fabricant: FLP

  

  CNC Key FLP Honda Logo CNC Aluminium Honda Ruckus

  CAD$ 37.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 37.99 Disponible

  Référence: FLP-010

  Fabricant: FLP

  

  Crown Oil Cap FLP CNC Aluminium GY6 / Honda Ruckus

  CAD$ 37.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 199.99 Produit disponible avec d'autres options

  Référence: FLP-007

  Fabricant: FLP

  

  Front Light FLP Monster Eye CNC Black Honda Grom

  Insired by Mike Wazowski from Monsters Inc. These brackets allow you to replace your stock Grom headlight with a single round 7″ light. The brackets come anodized black or raw, and are built in with flush mounted turn signals. Includes: Brackets BLACK or RAW / Turn Signals amber eagle eye / Spacers / Hardware / Round 7″ LED LIGHT. You will need to buy a...

  CAD$ 199.99

  Détails

  Produit disponible avec d'autres options

  Ajouter au comparateur
• 

  CAD$ 31.99 Rupture de stock

  Référence: FLP-020

  Fabricant: FLP

  

  Gas Tank Riser FLP CNC Aluminium Honda Ruckus

  Maybe your ruckus is sitting low and you need some ground clearance or maybe you want to raise your gas tank and add some leds around it. This kit will raise your tank .750 – 3/4”. Includes : 4 M6 CNC dress up washers, 4 M6 x45 stainless bolts, 4 CNC stand off spacers and 4 lock nuts

  CAD$ 31.99

  Ajouter au panier Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 281.99 Rupture de stock

  Référence: FLP-019

  Fabricant: FLP

  

  Hub de Roue Arrière FLP 4x110 for Honda Ruckus avec Moteur Original (GET)

  Please read the description carefully as this hub doesn’t work for every one. This mount is made for Honda Ruckus with the stock engine. For best fitment use the following wheels specs with 12x8 fatty mount to have every thing line up center . Last photo is an example with this hub installed with the set up mentioned. 12x7 wheel. 4x110 bolt pattern with...

  CAD$ 281.99

  Ajouter au panier Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 311.99 Disponible

  Référence: FLP-017

  Fabricant: FLP

  

  Hub de Roue Avant FLP 4x90 Pour Honda Ruckus avec Frein a Drum

  So you are ready to add new wheels to your ruckus BUT you don’t want to fork out 1000.00 dollars to get a full disk brake set up. This is where our Front Drum Hub comes in. BOLT ON 12 x 4 4X90 or 5x90 wheels. 100 percent bolt on. Speedometer still works. Wheel bolts included. Use you factory wheel spacer. THINGS TO KEEP IN MIND : These only work with the...

  CAD$ 311.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 37.99 Disponible

  Référence: FLP-002

  Fabricant: FLP

  

  Key Ignition cover FLP Lusso CNC Aluminium Honda Ruckus

  Another billet item by FLP. Simple to install remove your stock plastic piece and install our billet cover and secure it with the set screw on the top. Works great with out billet ruckus key gives a little more clearance for locking your bars. Includes : billet cover / set screw / I key for install. Made in the USA with USA material

  CAD$ 37.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 81.99 Disponible

  Référence: FLP-018

  Fabricant: FLP

  

  Keyless Gas Cap FLP BBS CNC Aluminium Honda Ruckus

  Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.

  CAD$ 81.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 81.99 Rupture de stock

  Référence: FLP-011

  Fabricant: FLP

  

  Keyless Gas Cap FLP Crown CNC Aluminium Honda Ruckus

  Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.

  CAD$ 81.99

  Ajouter au panier Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 81.99 Disponible

  Référence: FLP-024

  Fabricant: FLP

  

  Lumière Arrière FLP Lusso CNC Aluminium Pour Honda Ruckus

  CAD$ 81.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 103.99 Disponible

  Référence: FLP-006

  Fabricant: FLP

  

  Lumière arrière FLP Lusso Noir pour Honda Ruckus

  CAD$ 103.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 231.99 Disponible

  Référence: FLP-015

  Fabricant: FLP

  

  Lumière Avant FLP Minion Eye CNC Aluminium

  The much anticipated Minion eye is ready ! That perfect bolt on head light . Chuck out the stock candle head lights and light up road with this 7 inch led light. Kit specs : 7 inch round led with h4 wiring adapter, CNC bracket with reversible light mounts to have the light sit high or low, 3 x stand off spacers, M6 and M8 hardware, Full CNC faces no short...

  CAD$ 231.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 244.99 Rupture de stock

  Référence: FLP-016

  Fabricant: FLP

  

  Lumière Avant FLP Minion Eye CNC Noir

  The much anticipated Minion eye is ready ! That perfect bolt on head light . Chuck out the stock candle head lights and light up road with this 7 inch led light. Kit specs : 7 inch round led with h4 wiring adapter, CNC bracket with reversible light mounts to have the light sit high or low, 3 x stand off spacers, M6 and M8 hardware, Full CNC faces no short...

  CAD$ 244.99

  Ajouter au panier Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 43.99 Rupture de stock

  Référence: FLP-021

  Fabricant: FLP

  

  Pegs FLP Shuttle CNC Aluminium Honda Ruckus(2x)

  The perfect pegs for your ruckus. Easy bolt on for any ruckus. Knurled finish for no slip. Rounded head wont eat up your ankles. Seamless flush look with hidden hardware. M10 x 1.5 threads work with most foot braces.

  CAD$ 43.99

  Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 54.99 Disponible

  Référence: FLP-012

  Fabricant: FLP

  

  Radiator Cap FLP Crown CNC Aluminium Honda Ruckus

  Give your get some flare with the new ROYAL RAD CAP. Hides away the ugly stock radiator cap. 2 set screws secure the cap onto the your old radiator cap. Work for stretched ruckus only. The perfect match for our ROYAL gas cap. Made in USA.

  CAD$ 54.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 37.99 Disponible

  Référence: FLP-004

  Fabricant: FLP

  

  Spike Oil Cap FLP CNC Aluminium GY6 / Honda Ruckus

  CAD$ 37.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 43.99 Disponible

  Référence: FLP-001

  Fabricant: FLP

  

  Triple Tree Cover FLP Aluminium Honda Ruckus

  CAD$ 43.99

  Ajouter au panier Détails

  Ajouter au comparateur
• 

  CAD$ 50.99 Rupture de stock

  Nouveau

  Référence: FLP-025

  Fabricant: FLP

  

  Triple Tree Cover Open FLP Honda Ruckus

  Cover that ugly cast triple tree with this billet CNC cover. Compatible with all Ruckus years and perfect for those of you eliminating the front fender.

  CAD$ 50.99

  Détails

  Rupture de stock

  Ajouter au comparateur
• 

  CAD$ 168.99 Disponible

  Référence: FLP-009

  Fabricant: FLP

  

  Valve Cover FLP CNC Aluminum Honda Ruckus

  Change out your ugly stock cast valve cover and replace it our cnc machined full billet cover . The missing link to completing your build. Roll up to the local meet spot and kill them with some billet cnc machined goodness! Specs : 6061 billet, Direct bolt on use your original honda seals, 1/8 npt tapped hole perfect to run -4 an fitting to a catch can, 5...

  CAD$ 168.99

  Ajouter au panier Détails

  Ajouter au comparateur