No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Reference: MF99.00069
Manufacturer: Motoforce
Special tool to lock the front pulley for quick and easy dismantling of the variator. No serious tuner should be without one.
Reference: S6-030100
Manufacturer: Stage6
This special tool is ideal for the Stage6 R/T CNC-type clutch bells. The bell has two indentures in the cooling ring where this tool can be inserted to grip and lock the bell and undo the screws without having to resort to an impact screwdriver.
Reference: MF99.00068
Manufacturer: Motoforce
This special tool locks the torque driver, which makes a quick and straight-forward removal of clutch, clutch bell and torque driver possible. An essential part for serious tuners.
Reference: MF99.00101
Manufacturer: Motoforce
Made by Polini, this one here is basically nothing but an oversized oil-filter tool. The sling is fitted around the clutch bell or the flywheel and then stops these from turning.
Reference: MF99.00055
Manufacturer: Motoforce
This is the most inexpensive tool to lock the variator, available in two versions. It can simply be threaded into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. Please employ this tool carefully; otherwise you can damage the...
Reference: MF99.00053
Manufacturer: Motoforce
This is the most inexpensive tool to lock the variator, available in two versions. It can simply be threaded into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. Please employ this tool carefully; otherwise you can damage the...
Reference: MF99.00054
Manufacturer: Motoforce
This is the most inexpensive tool to lock the variator. It can simply be inserted into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. PLEASE BE VERY CAREFUL when you employ this tool; otherwise you can damage the piston top!
Reference: EB081
Manufacturer: Easyboost
Easyboost variator / Clutch Tool for Yamaha Tmax is the essential tool to remove / set up easily the variator / clutch of your Tmax 500 / 530 (suitable for all models). With this kit, you can change the rollers of the variator, the belt as well as the clutch and the clutch disc of your maxi scooter. The kit includes: - A multipurpose spanner to remove the...
Reference: EB024
Manufacturer: Easyboost
The universal Easyboost clutch nut spanner is the essential tool to remove easily your clutch on your Scooter !
Reference: MF99.00059
Manufacturer: Motoforce
This is what you need to get the flywheel of the ignition off. Unfortunately Buzzetti do not list their pullers with the models they will fit. The list we give is based on our experience. Unfortunately this experience also teaches that one cannot always be sure which extractor works on which flywheel. The best idea certainly is to measure your flywheel's...
Reference: MF99.00060
Manufacturer: Motoforce
This is what you need to get the flywheel of the ignition off. Unfortunately Buzzetti do not list their pullers with the models they will fit. The list we give is based on our experience. Unfortunately this experience also teaches that one cannot always be sure which extractor works on which flywheel. The best idea certainly is to measure your flywheel's...
Reference: WB-5376
Manufacturer: Buzzetti
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when replacing the crankshaft or changing bearings. The puller will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: 15363
Manufacturer: Buzzetti
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when changing bearings or replacing the crankshaft. The puller's body will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: 6011651
Manufacturer: Malossi
Special tool to extract rotors of internal rotor ignitions from Italkit, Polini and Malossi. Extraction is a piece of cake thanks to the ample contact surface, which prevents slipping and jamming.
Reference: S6-4000SC
Manufacturer: Stage6
This is a very effective precision instrument that you will need to measure the port timing of different cylinders in 2-stroke engines. The wheel is black anodised and resistant to fuel and additives. The wheel can be mounted to all 50cc engines using the spacer; the indicator can be simply bolted to the stud!!! This is for all of you who want to exploit...
Reference: MF99.00071
Manufacturer: Motoforce
In order to adjust your inner rotor ignition, you'll need either a TDC timing gauge or a micrometer. We can offer this Motoforce micrometer in 0.1mm steps. It allows for finding the TDC of the piston and adjusting the ignition accordingly. This method is a tad more fiddly than working with a TDC gauge, but on the other hand, the price is unbeatable.
Reference: MF99.00112
Manufacturer: Motoforce
Indispensable for all performance ignition systems, since they require timing to be set by hand (Italkit, Malossi, Polini and MVT inner rotor ignitions). Comes complete with a certificate to prove accuracy, mounting kit and feeler tip.
Reference: MF99.00113
Manufacturer: Motoforce
Indispensable for all performance ignition systems, since they require timing to be set by hand (Italkit, Malossi, Polini and MVT inner rotor ignitions). Comes complete with a certificate to prove accuracy, mounting kit and feeler tip. Holder for TDC gauge, M14
Reference: S6-4000SC/1
Manufacturer: Stage6
This adaptor makes it possible to mount the Stage6 degree wheel onto the 12mm tapers of the Stage6 crankshafts. Simply screw it onto the thread at the alternator side and measure port timing.
Reference: MF99.00074
Manufacturer: Motoforce
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when replacing the crankshaft or changing bearings. The puller will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: MF99.00072
Manufacturer: Motoforce
Universal flywheel / internal rotor puller for the most common ignitions such as Italkit, Polini, Malossi, MVT, PVL, and HPI. The simple 2-bolt system makes it quite easy to get the rotor off the crankshaft without any damage. Furthermore, this can be used as flywheel puller for some models.
Reference: 21745
Manufacturer: Buzzetti
Micrometre-measuring screw allows you to find TDC (top dead centre) in the piston stroke. A must for tuners! Allows for precise tuning of ignition points.
Reference: P3726
Manufacturer: Replay
In order to adjust your inner rotor ignition, you'll need either a TDC timing gauge or a micrometer. We can offer this micrometer in 0.1mm steps. It allows for finding the TDC of the piston and adjusting the ignition accordingly. This method is a tad more fiddly than working with a TDC gauge, but on the other hand, the price is unbeatable.
Reference: 173.0002
Manufacturer: Polini
Universal ignition timing gauge by Polini for adjustment of top dead centre (TDC).
Reference: EB167
Manufacturer: Easyboost
Ignition holding tool universal Easyboost allows you to easily loosen the nut holding the magnetic flywheel of all 50cc scooter (MBK Booster, Nitro, Peugeot, Piaggio, MBK 51, Peugeot 103...), and 50cc AM6 (TZR, Rieju, Beta...) or Derbi engines. Thanks to its special shape, you can loosen the nut of an internal rotor ignition, whether it is a PVL, Selettra...
Reference: WB-5070
Manufacturer: Buzzetti
This is an indispensable tool that you will need when taking off main bearings without damaging the intact crankshaft. It is definitely a must-have with racing set-ups, where the main bearings have to be replaced more often in order to prevent subsequent damage.
Reference: WB-5038
Manufacturer: Buzzetti
This Buzzetti tool allows you to separate the crankcases, without having to resort to a hammer and thus without damage to crankshaft or cases. All you have to do is place the tool onto the end of the crankshaft and screw it against the block. Please make sure to remove the crankcase bolts beforehand!
Reference: EB060
Manufacturer: Easyboost
How to install crankshaft bearings? Easyboost answers this question with this Bearing Tool.
Reference: EB065
Manufacturer: Easyboost
How to easily dismantle a crankshaft? Easyboost answers this question with the MBK Nitro Peugeot Piaggio AM6 Derbi Scooter Moto 50 2-in-1 crankcase separator bearing puller. As always, the production is guaranteed 100% French!
Reference: S6-080166
Manufacturer: Stage6
CNC-machined and high-quality anodized HQ seal installation tool that makes installing crankshaft seals really easy. For scooters with Minarelli engine (horizontal and vertical). The correct installation of oil seals is crucial for the performance and longevity of the engine. The seals must be installed absolutely level and at the correct depth for the...
Reference: MF99.20163
Manufacturer: Motoforce
This digital multimeter from Motoforce measures current, voltage, resistance and battery voltage. It can test diodes and be used for continuity testing. Thanks to its rubber sleeve, the multimeter is shockproof and after 15 minutes, it is automatically switched off. The instruments' features include: a rotary switch for 18 measuring ranges,10A...
Reference: L-SA120
Manufacturer: Motoforce
Universally usable scale with touch screen
Reference: MF99.00079
Manufacturer: Motoforce
Universally applicable work gloves with non-slip coating on the palm. 1 pair Size 9 (universal), Nylon knitted, with nitrile foam coating.
Reference: MF99.00120
Manufacturer: Motoforce
High-quality electrical tape from Motoforce, for universal use. This is something that should not be missing from your toolbox. Consists of 6 rolls in various colours, 19mm x 2.5m each.
Reference: MF99.00119
Manufacturer: Motoforce
Tearproof, very adhesive tape. Ideal for all kinds of areas; an item that no tool box should be without. 50mm wide.
Reference: MF99.00806
Manufacturer: Motoforce
Motoforce twist pliers to secure fasteners the way it is necessary in racing classes of the DSSC and EST. The wire will be grabbed with the pliers and then twisted by pulling back on the knob. We also offer matching safety wire from Motoforce.
Reference: MF99.00102
Manufacturer: Motoforce
This is a universal circlip pliers set with 5 replaceable tips, covering a wide range of uses. This way, they can be used either to grip Seeger-type circlips (snap rings) securely for removal and installation, but also e.g. to insert clutch springs.
Reference: MF99.00107
Manufacturer: Motoforce
We can also offer T-handle socket wrenches in different sizes from Motoforce. These parts are essential for every workshop. Thanks to the large handle, even stubborn bolts can easily be loosened.
Reference: MF99.00067
Manufacturer: Motoforce
Inserting exhaust springs takes quite a lot of strength. In order to prevent slipping of with the pliers, we recommend using this spring stretcher, which makes things a lot easier.
Reference: MF99.00702
Manufacturer: Motoforce
A neat tool to shut off flow through oil hoses, fuel lines, etc. without damaging the lines. Attention: fuel hose is not included in delivery!
Reference: MF99.00106
Manufacturer: Motoforce
A set of 3 levers from Motoforce; necessary to install and remove tyres.
Reference: MF99.20100
Manufacturer: Motoforce
This transparent box comes in handy to store small parts that tend to disappear somewhere, such as main jets, roller weights, clutch springs etc. Six dividers can be freely placed to allow for individual arrangement. Dimensions: 137 x 137 x 30mm
Reference: 242094
Manufacturer: Malossi
Knowing where your tools and small parts are is essential for any DIY mechanic. With this Malossi assortment box, you always have the right jet size at hand. Holds up to 24 main jets.
Reference: S6-0222
Manufacturer: Stage6
This oil measuring jug from Stage 6 features all important scales. It comes in handy if you want to mix the fuel-oil-mixture yourself and is of course closeable so that you also can use it to store the oil. The lettering is resistant to oil and fuel and an extra seal ring ensures that your helmet compartment stays clean.
Reference: MF99.00803
Manufacturer: Motoforce
Feeler gauge from Motoforce to measure valve clearance in 4-stroke engines. Consisting of 20 blades from 0.05 to 1.00mm.
Reference: MF99.00804
Manufacturer: Motoforce
You can see that your cylinder is still in good shape from the crosshatch pattern on the cylinder liner. However, this pattern will fade after a while, which makes refinishing the cylinder necessary. Another reason for honing may be a seize-up that scores the bore surface. Any well-equipped toolbox should definitely include a honing tool.
Reference: MF99.00501
Manufacturer: Motoforce
A handy tool that you can easily take with you. Comes with all the common keys necessary for your scoot, sizes from 2 to 8. Key sizes: 2; 2.5; 3; 4; 5; 6; 8
Reference: MF99.00115
Manufacturer: Motoforce
Digital caliper gauge from Motoforce for exact measurements. Useful to find out squish clearance or simply to measure the length of a bolt. Measuring range: 0-150mm
Reference: MF99.00095
Manufacturer: Motoforce
Rubber mallet from Motoforce for all common work on your scoot. Especially useful when removing the crankshaft or engine. Head completely made of hard rubber with wooden handle. Diameter of contact surface: 55mm
Reference: MF99.20164
Manufacturer: Motoforce
Damaged threads in cylinders or engines can become major problems, which is why we recommend thread repair kits, e.g. this one from Motoforce. Included in the set are a drill bit to drill out the original thread, a tap to re-tap the thread, and an installing tool for the inserts as well as 20 thread inserts. The set is stowed in a plastic box. The thread...
Reference: MF99.20165
Manufacturer: Motoforce
Damaged threads in cylinders or engines can become major problems, which is why we recommend thread repair kits, e.g. this one from Motoforce. Included in the set are a drill bit to drill out the original thread, a tap to re-tap the thread, and an installing tool for the inserts as well as 20 thread inserts. The set is stowed in a plastic box. The thread...
Reference: MF99.20166
Manufacturer: Motoforce
Damaged threads in cylinders or engines can become major problems, which is why we recommend thread repair kits, e.g. this one from Motoforce. Included in the set are a drill bit to drill out the original thread, a tap to re-tap the thread, and an installing tool for the inserts as well as 20 thread inserts. The set is stowed in a plastic box. The thread...
Reference: MF96.90043
Manufacturer: Motoforce
A faulty thread in the engine or the cylinder can have serious (and very expensive) consequences. We therefore recommend these Motoforce thread inserts and the thread repair sets.
Reference: MF96.90044
Manufacturer: Motoforce
A faulty thread in the engine or the cylinder can have serious (and very expensive) consequences. We therefore recommend these Motoforce thread inserts and the thread repair sets.
Reference: MF96.90045
Manufacturer: Motoforce
A faulty thread in the engine or the cylinder can have serious (and very expensive) consequences. We therefore recommend these Motoforce thread inserts and the thread repair sets.
Reference: MF99.00502
Manufacturer: Scootertuning.ca
This is a special torx key (with hole) for easy removal of security torx screws with pin (I-Torx), as they are used e.g. for inlet manifolds on Piaggio or for Peugeot engine covers.
Reference: MF99.00140
Manufacturer: Motoforce
If you want to check whether your cylinder still has the ideal compression (and therefore performance), simply screw in the adaptor in place of the spark plug.
Reference: WB-5034
Manufacturer: Buzzetti
Universal tool to quickly remove bearings, e.g. stubborn bearings on the crankshaft. For bearings with a diameter of 19 - 45mm.
Reference: BZT30540
Manufacturer: Buzzetti
This Buzzetti hand impact driver allows you to loosen stubborn screws and nuts. The direction of the impact driver can be also be reversed. Comes with 6 bits (3x Phillips, 1x slot, 1x 6mm and 1x 8mm hex head).
Reference: WB-4913
Manufacturer: Buzzetti
Damaged screw heads can cause a lot of grief. This bit set lets you remove the old screw applying a left-hand thread, without damaging the thread. 3-12mm
Reference: 390-8210
Manufacturer: Matrix
Ensemble de fixation Premium avec crochet pour boucle souple supérieure et plaque d'identification pour des graphiques personnalisés. Toutes les coutures sont à double couture carrée / croisée avec du fil de nylon robuste. Graphiques personnalisés sublimés aux couleurs d'usine. La longueur totale est de 69 ”X 1” (largeur) et est fabriqué à partir de...
Reference: 23995
Manufacturer: Scootertuning.ca
High Quality Indoor Cover with perfect fit for scooters, motor scooters and smaller scooters. Indoor folding motorcycle cover with softer, breathable. This prevents corrosion and residual moisture . This is especially important during long periods, such as Winter. Suitable for small and medium-sized scooter. This size of Speeds tarpaulin is the...
Reference: 23996
Manufacturer: Scootertuning.ca
High Quality Indoor Cover with perfect fit for scooters, motor scooters and smaller scooters. Indoor folding motorcycle cover with softer, breathable. This prevents corrosion and residual moisture . This is especially important during long periods, such as Winter. Suitable for small and medium-sized scooter. This size of Speeds tarpaulin is the...
Reference: 23997
Manufacturer: Scootertuning.ca
High Quality Indoor Cover with perfect fit for scooters, motor scooters and smaller scooters. Indoor folding motorcycle cover with softer, breathable. This prevents corrosion and residual moisture . This is especially important during long periods, such as Winter. Suitable for small and medium-sized scooter. This size of Speeds tarpaulin is the...
Reference: 17244
Manufacturer: Scootertuning.ca
High quality fabric covering. Covering the best in our range. Suitable for smaller scooters without topcase, usually with 10-inch wheels size.100% polyester fabric; Extremely tear resistant; 100% waterproof; UV stabilized and cold-stable; Heat resistant Exhaust area; Elastic and hook clamp for efficient mounting; Enhanced lock body. Include Transport bag
Reference: 17245
Manufacturer: Scootertuning.ca
High quality fabric covering. Covering the best in our range. Suitable for smaller scooters without topcase, usually with 10-inch wheels size.100% polyester fabric; Extremely tear resistant; 100% waterproof; UV stabilized and cold-stable; Heat resistant Exhaust area; Elastic and hook clamp for efficient mounting; Enhanced lock body. Include Transport bag
Reference: 23993
Manufacturer: Scootertuning.ca
High quality fabric covering. Covering the best in our range. Suitable for smaller scooters without topcase, usually with 10-inch wheels size.100% polyester fabric; Extremely tear resistant; 100% waterproof; UV stabilized and cold-stable; Heat resistant Exhaust area; Elastic and hook clamp for efficient mounting; Enhanced lock body. Include Transport bag
Reference: VC18928
Manufacturer: Scootertuning.ca
Scooter disc lock with 5.5mm pin. Suitable for scooters with small holes / cut-outs. Supplied with pouch and 2x keys.
Reference: VC18929
Manufacturer: Scootertuning.ca
Motorcycle disc lock with 10mm pin for motorcycles and scooters with relevant sized holes. Supplied with pouch and 2 keys. Please check the size of the hole in the disc before ordering, otherwise there is a 5.5mm pin available.
Reference: RP702004
Manufacturer: Scootertuning.ca
Very robust tank chain lock with flexible rubber sheathing. Length: 1.2m / diameter: 18mm. Classic motorcycle lock. Supplied with 2 keys.
Reference: 34-08328
Manufacturer: Ram Mount
Consists of a zinc coated u-bolt base, double socket arm and universal X-Grip® holder. Included in this package is hardware that will accommodate rails from 0.50” to 1.25” in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. Compatible with handheld devices that will fit the dimensions listed below. It is...
Reference: 34-08329
Manufacturer: Ram Mount
Consists of a zinc coated u-bolt base, double socket arm and universal spring loaded X-Grip® IV holder for 5” large phones and tablets. Included in this package is hardware that will accommodate rails from 0.50” to 1.25” in diameter. Compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of...
Reference: W890.500856
Manufacturer: Wurth
Clean up dust from hard to reach areas!
Reference: W714.6315
Manufacturer: Wurth
These tools are used to mark the center of an area you're about to drill a hole. It keeps the drill bit centered and prevents it from slipping away.