Scooter / Motorbike

Accessories

Custom Wheels

Top sellers

Specials

Featured products

  • CAD$ 52.99 In stock

    Reference: RH-187

    Brand: Ruckhouse

    Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor

    CAD$ 52.99
    In stock
  • CAD$ 225.99 In stock

    Reference: 1000-1010.10

    Brand: NCY

    High performance rear shock from NCY. With a stiffer recoil, and adjustable preload, this is a must have upgrade to your stock or performance machine! 10 inches eye to eye, Top Eye 20mm wide, Fork 20mm wide. Note: If you using stock air box, minor fitment modifications may be needed depending on model year

    CAD$ 225.99
    In stock
  • CAD$ 49.99 Out of stock

    Reference: SCT-HCCP1232

    Brand: Ruckhouse

    These are for our 4/110 wheels. They sandwich between the wheel and your hub for the perfect fit. You won’t be losing this baby down the street. The flange on the outside is only .075 thick so don’t worry about your wheel not lining up. It will probably help line it up better since most mounts on the market hold your engine too far to the left.

    CAD$ 49.99
    Add to cart More
    Out of stock
  • CAD$ 54.99 In stock

    Reference: TRS-KIC/BK

    Brand: TRS

    Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!

    CAD$ 54.99
    In stock
  • CAD$ 25.99 Out of stock

    Reference: RH-043

    Brand: Ruckhouse

    CAD$ 25.99
    Add to cart More
    Out of stock
  • CAD$ 34.99 In stock

    Reference: 0800-1099.10

    Brand: NCY

    If you have a NCY handlebar clamp on your Ruckus and still want to use your stock speedo, the NCY Speedometer Bracket is a must! Bolts right up to the mounting location found on the NCY handlebar clamp. This part is compatible with both open and closed top NCY handlebar clamp. Made of aluminum.

    CAD$ 34.99
    In stock
  • CAD$ 39.99 In stock

    Reference: TRS-IA001/AL

    Brand: TRS

    Running a forward facing carb, and having problems with how high the carburator sits? Some carbs have a problem when angled too high in the front, and this can cause the engine to not run right, and have problems feeding fuel properly! This flange also turns the carb in more to the center of the bike so that when running a fat tire setup, the carb doesn't...

    CAD$ 39.99
    In stock
  • CAD$ 24.99 In stock

    Reference: 1200-1027.10

    Brand: NCY

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1500 rpm compression spring is specifically for the GY6. Measurements: Wire Diameter: 4.2mm /...

    CAD$ 24.99
    In stock

New arrivals

Best Sellers

  • CAD$ 0.99 In stock

    Reference: 366941

    Brand: Malossi

    High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...

    CAD$ 0.99
    In stock
  • CAD$ 17.99 In stock

    Reference: 669417

    Brand: Malossi

    The HAT weights are very durable and self lubricating. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)

    CAD$ 17.99
    In stock
  • CAD$ 66.99 In stock

    Reference: IRC01-00

    Brand: IRC

    IRC high quality dual-Purpose scooter tires that provide good traction on street.

    CAD$ 66.99
    In stock
  • CAD$ 1.99 In stock

    Reference: SCT-GA001

    Brand: Scootertuning.ca

    Replacement reed valve gasket for all Minarelli Horizontal engines. 

    CAD$ 1.99
    In stock
  • CAD$ 41.99 In stock

    Reference: SCT-0800

    Brand: NCY

    In order to offer optimal handling, a dragrace handlebar should be nearly straight. Only the handlebar ends are slightly bent in order to provide the necessary comfort for the wrists. The handlebar may also be shortened according to your requirements.

    CAD$ 41.99
    In stock
  • CAD$ 11.99 In stock

    Reference: MF55.150

    Brand: Motoforce

    Budget weights by Motoforce, choice of weights. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)

    CAD$ 11.99
    In stock
  • CAD$ 6.99 In stock

    Reference: BR8HS-4322

    Brand: NGK

    The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...

    CAD$ 6.99
    In stock
  • CAD$ 2.99 In stock

    Reference: SCT-GA006

    Brand: Scootertuning.ca

    We can offer high-quality exhaust gaskets for all common original, sport and racing exhausts

    CAD$ 2.99
    In stock
  • Free-Shipping
  • Promotion

icon

Free shipping

For all order over $199.00

icon

Product return

15 days for return

icon

Fast shipping

2 days and Overnight

icon

Safe Payment

Safe shopping guarantee