No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Replacement gasket set for the Roost...
Viewed products
Fuel hose with a length of 1m, interior...
Polini Speed Clutch Bell. Better design than...
Clutch spring set for 125/150cc original and...
The CP is the first carburetor that has been...
Reference: NK700.13
Brand: Naraku
Naraku 30mm racing carb for 125-300cc engines. Racing only! 35Mm connection, 50mm on the filter side. Throttle cable layout on the side.Build height corresponds with the original. Please check that this carb is suitable before ordering. Different air filter required, different inlet manifold, or adapted original.
Reference: NK200.02
Brand: Naraku
Naraku 30mm racing carb for 125-300cc engines. Racing only! Connection width 37mm, filter side 50mm. Throttle cable layout on the side. Build height corresponds with the original. Please check that this carb is suitable before ordering. Different air filter required, different inlet manifold, or adapted original. MAIN JET=138 Pilot Jet=60
Reference: Taida-PE28
Brand: Taida
Reference: SW-HPE26
Brand: Sunworld
Sunworld PE carburettor is a very high precision carburettor. They have been used for several years in the race and have been proven. A variety of jets for this carb are of course also available. The carb is equipped with a vacuum (supplied with cap if you don't us it), as well with a manual choke and aluminum made bowl. The outside measurements and the...
Reference: SW-HPE28
Brand: Sunworld
Sunworld PE carburettor is a very high precision carburettor. They have been used for several years in the race and have been proven. A variety of jets for this carb are of course also available. The carb is equipped with a vacuum (supplied with cap if you don't us it), as well with a manual choke and aluminum made bowl. The outside measurements and the...
Reference: VCR-RD13PB.26
Brand: Voca
The first range of Voca Racing carburettors. Carburettors round bell designed to be mounted on Pitbikes 150 / 160cc 4T. With manual choke. Available in 26 and 28mm. Voca has worked with his competition team for achieve a carburettor that work best. 33mm Intake connection / 47mm airfilter connection.
Reference: VCR-RD13PB.28
Brand: Voca
The first range of Voca Racing carburettors. Carburettors round bell designed to be mounted on Pitbikes 150 / 160cc 4T. With manual choke. Available in 26 and 28mm. Voca has worked with his competition team for achieve a carburettor that work best. 33mm Intake connection / 47mm airfilter connection.
Reference: VCR-RD13PE
Brand: Keihin
Carburetor KEIHIN PE 28mm, round slide, 4T competition use, original Keihin.