No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
The MULTIVAR is a sturdy high-quality...
Viewed products
The transmission bearings of a Minarelli...
Nut M10x1mm for the clutch bell on the input...
Taida Piston rings (61mm / 170cc) 4-stroke for...
Set of 4 socket screws, Zinc plated grade 12.9...
Reference: S6-SSP367
Brand: Stage6
Stage6 is the first manufacturer to offer a homologated riser kit that is allowed on public roads. The riser kit has been CNC-machined from solid aluminium. It raises the rear end by 40mm so that the front is lower than the rear. The riser kit can be mounted within a few minutes. It will simply be bolted between the engine block mount and the shock...
Reference: STR-205.51/
Brand: Str8
So raising your chassis by 40mm is still not enough for you? Then go for this XL riser kit with an enormous 60mm length. Fitting takes only a few minutes. Using a side stand is recommended. Please take into account that you will have to rotate the rear shock by 90 degrees and that you might run into problems due to lack of space.