List of products by manufacturer Naraku

• 

  CAD$ 29.99 In stock

  Reference: NK200.04

  Brand: Naraku

  

  Intake manifold spacer Naraku Jet Flow CNC GY6 50cc

  CNC-machined aluminium intake manifold spacer from NARAKU. The Naraku Jet Flow spacer is designed to optimize flow in NARAKU 51mm cylinder heads. The conical bore of the spacer allows unrestricted flow from 24mm manifolds to 21mm inlet ports on the 51mm cylinder head (present in 51mm and 52.4 mm NARAKU cylinder kits). The resulting venture-effect means...

  CAD$ 29.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 149.99 In stock

  Reference: NK201.14

  Brand: Naraku

  

  Intake System Naraku Big Valve V2 23-32mm (Dio-Elite)

  The Naraku Big Valve manifold V.2 with large double racing reed block. For upright Peugeot, Kymco, SYM or Honda engines. With this intake system and a 19mm or above carburettor, you can get the most out of your engine! The intake system has a vacuum port. It is recommended for conversions to pre-mix lubrication. Comes as shown with fixings, reed valves,...

  CAD$ 149.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: NK201.15

  Brand: Naraku

  

  Intake system Naraku Big Valve V2 23-32mm Minarelli Horizontal

  Naraku Racing Intake V.2 including 2 adapters for all common carburettors. The 23mm adapter is suitable for all Dellorto 10-21mm and Arreche 17-21mm carburettors. The 32mm adapter allows for instance the mounting of PWK carburettors with an opening of up to 30mm. Includes NBR Racing reed block and fixings. The somewhat longer design accelerates the gas...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 36.99 In stock

  Reference: NK200.21

  Brand: Naraku

  

  Main jet set Naraku 50-72 (Honda Original Carb)

  Set of 12 Naraku Gurtner main jets. Comes with 12 jets in 0.02mm increments. Set contains 50-72.

  CAD$ 36.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 35.99 In stock

  Reference: NK200.22

  Brand: Naraku

  

  Main jet set Naraku 74-96 (Honda Original Carb)

  Set of 12 Naraku Gurtner main jets. Comes with 12 jets in 0.02mm increments. Set contains 74-96.

  CAD$ 35.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: NK102.18

  Brand: Naraku

  

  Oil seal set for Naraku Torque Driver GY6

  Naraku quality shaft seals for various Kymco, SYM and Honda scooters. Shaft seals are required on the rear of the convertor and seal in the convertor grease and protect the belt from slipping.

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 In stock

  Reference: NK100.04

  Brand: Naraku

  

  Piston Naraku 50cc (Kymco-Dio)

  High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Kymco, SYM and Honda engines. Delivery as shown, including: piston rings, gudgeon pin and circlips. Special molybdenum coating for protecting the cylinder and piston during the run-in period. It is a good rule to change the piston in a 50cc 2-stroke engines after about 6,000...

  CAD$ 42.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: NK101.10

  Brand: Naraku

  

  Piston Naraku 50cc 10mm Minarelli

  High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Minarelli AC and LC engines. Delivery as shown, including: piston rings, gudgeon pin and circlips. Special molybdenum coating for protecting the cylinder and piston during the run-in period. It is a good rule to change the piston in a 50cc 2-stroke engines after about 6,000...

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 In stock

  Reference: NK100.99

  Brand: Naraku

  

  Piston Naraku 70cc 10mm Minarelli

  Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circlips.

  CAD$ 42.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: NK101.46

  Brand: Naraku

  

  Piston Naraku 75cc Cast-Iron / Aluminium (Kymco-Dio) 48mm

  Replacement Naraku piston kit 75cc [Sport] – Dio/Kymco/Sym uprightDiameter 47.95mm

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: NK100.18

  Brand: Naraku

  

  Piston pin clips Naraku 2 pcs

  13mm gudgeon pin cirlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend opening the circlip against the travel of the piston. G-clip design Delivery contains: 2x circlips

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: NK100.53

  Brand: Naraku

  

  Piston pins Naraku 72cc

  Naraku gudgeon pin in various sizes for GY6 139QMB/QMA engines. Please select the desired size based on the piston diameter from the list below. Suitable for Naraku cylinder sets and Chinese original or tuning cylinders

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: NK101.24

  Brand: Naraku

  

  Piston ring set Naraku 50cc for Bws / Zuma / C3 50F (4T)

  This piston ring set can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 22.99 Out of stock

  Reference: NK101.27

  Brand: Naraku

  

  Piston ring set Naraku 50cc for Piaggio 4-stroke

  This piston ring set can be optionally used in Naraku 50cc 4-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.

  CAD$ 22.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 23.99 In stock

  Reference: NK100.82

  Brand: Naraku

  

  Piston ring set Naraku 50cc GY6 50cc

  This piston ring set for 50cc GY6 cylinders (39mm bore) can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.

  CAD$ 23.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: NK100.84

  Brand: Naraku

  

  Piston ring set Naraku 72cc GY6 50cc

  This piston ring set for 72cc GY6 cylinders (47mm bore) is specially manufactured for the 72cc Naraku 4-stroke cylinder (NK100.47).

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 66.99 In stock

  Reference: NK600.53

  Brand: Naraku

  

  Piston set Naraku 150cc (57.4mm) for GY6 150cc

  Piston kit for the Naraku 4-stroke cylinder (NK600.52), 150cc GY6 original cylinders and 150cc cylinder kits from other manufacturers. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.

  CAD$ 66.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 74.99 In stock

  Reference: NK600.04

  Brand: Naraku

  

  Piston set Naraku 160cc (58.5mm) for GY6 150cc

  Replacement Naraku piston kit (58.5mm / 160cc) 4-stroke for GY6 Engine.

  CAD$ 74.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 73.99 Out of stock

  Reference: NK600.06

  Brand: Naraku

  

  Piston set Naraku 180cc (63mm) for GY6 150cc

  Piston kit for the Naraku 4-stroke cylinder (NK-600.06), 180cc GY6 original cylinders and 180cc cylinder kits from other manufacturers. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.

  CAD$ 73.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 52.99 In stock

  Reference: NK101.22

  Brand: Naraku

  

  Piston set Naraku 50cc for Bws / Zuma / C3 50F (4T)

  Complete piston kit including rings, gudgeon pin and gudgeon pin circlips for original or Naraku replacement cylinders. Replacement piston kit has the same piston coating as on the Naraku 50cc cylinder kit. We recommend ordering the required replacement gasket set at the same time.

  CAD$ 52.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: NK101.26

  Brand: Naraku

  

  Piston set Naraku 50cc for Piaggio 4-stroke 2V

  Replacement piston kit including piston rings, gudgeon pin and circlips for original cylinders and Naraku cylinders. Special molybdenum coating for protecting cylinder and piston during the run-in period.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 45.99 In stock

  Reference: NK100.71

  Brand: Naraku

  

  Piston set Naraku 50cc GY6 50cc

  NARAKU performance quality piston set. Suitable for all GY6 50cc cylinders [39mm bore]. The NARAKU piston has a molybdenum coating to reduce wear and shorten the running-in period. This piston has been included in all 50cc NARAKU cylinder sets since 2009, and can be easily used as a replacement in Chinese original cylinders. The CNC-machined grooves in...

  CAD$ 45.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 45.99 Out of stock

  Reference: NK100.63

  Brand: Naraku

  

  Piston set Naraku 72cc GY6 50cc

  NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The piston skirt has a special molybdenum coating for the all-important running-in period. Suitable for 47mm V.2 NARAKU GY6 139QMB/QMA cylinder kits and Kymco 4-strokes. Delivery includes piston rings 1 and 2 oil...

  CAD$ 45.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 72.99 In stock

  Reference: NK100.64

  Brand: Naraku

  

  Piston set Naraku V2 90cc GY6 50cc

  CNC-machined replacement piston for 52.4mm Naraku cylinder with molybdenum coating. Comes complete with piston rings, oil scraper rings, gudgeon pin and circlips.

  CAD$ 72.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: NK201.23

  Brand: Naraku

  

  Repair Kit Naraku for PHBG (19-21mm)

  Naraku carburettor repair kit for PHBG carbs.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: NK201.22

  Brand: Naraku

  

  Repair Kit Naraku for PHVA / PHBN (14-17.5mm)

  Naraku carburettor repair kit for PHVA / PHBN carbs.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: IP22167

  Brand: Naraku

  

  Repair Kit Naraku for PWK (21-28mm)

  Repair/spare part kit for PWK carburettors made by 101 Octane. Suitable for Keihin PWK carbs, as well as OKO, KOSO, NARAKU, Stage6 R/T and many more.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 125.99 Out of stock

  Reference: NK201.06

  Brand: Naraku

  

  Replacement Carburetor Naraku (Genuine-PGO-Kymco)

  Naraku carburettor with electric choke for use with Kymco SF10 horizontal engines. Jetting: Main jet = 78, Pilot Jet=35, Needle type=2RFM. Tuned for Euro I so jetting will need to be adjusted for use on Euro II vehicles.

  CAD$ 125.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 36.99 In stock

  Reference: NK101.80

  Brand: Naraku

  

  Replacement Piston Naraku 50cc Hyosung

  High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Morini AC engines. Delivery as shown, including: piston rings, gudgeon pin and circlips. Special molybdenum coating for protecting the cylinder and piston during the run-in period. It is a good rule to change the piston in a 50cc 2-stroke engines after about 6,000 miles. This...

  CAD$ 36.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 Out of stock

  Reference: NK901.22

  Brand: Naraku

  

  Secondary Gear kit Naraku 14/39 +10% for GY6 125-150cc

  Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...

  CAD$ 139.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 133.99 In stock

  Reference: NK901.23

  Brand: Naraku

  

  Secondary Gear kit Naraku 15/37 +20% for GY6 125-150cc

  Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...

  CAD$ 133.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: NK900.98

  Brand: Naraku

  

  Secondary Gear kit Naraku 16/37 +25% for GY6 125-150cc

  Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 149.99 In stock

  Reference: NK901.24

  Brand: Naraku

  

  Secondary Gear kit Naraku 17/36 +31% for GY6 125-150cc

  Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...

  CAD$ 149.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: NK900.99

  Brand: Naraku

  

  Secondary Gear kit Naraku 18/36 +35% for GY6 125-150cc

  Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: NK101.70

  Brand: Naraku

  

  Small end bearing Naraku (12x17x13)

  Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: NK101.73

  Brand: Naraku

  

  Small end bearing Naraku 12x16x13mm (CPI-Vento-Keeway)

  Naraku small end bearing [HD-Quality] - 12x16x13. Suitable for Minarelli and CPI, Generic, Keeway, Chinese-built 2-stroke engines with 12mm gudgeon pin.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare