No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
Nice results with an exhaust...
Reference: S6-5616601
Brand: Stage6
The Stage6 R/T Oversize CVT system. Enlarged CVT systems that extend the complete transmission range have become essential for race and midrace engines. Included in the delivery are the complete Stage6 R/T Oversize variator, the Stage6 R/T Torque Boost torque driver kit and the Stage6 R/T Oversize drivebelt.
Reference: S6-5614003
Brand: Stage6
The Stage6 R/T Oversize CVT system. Enlarged CVT systems that extend the complete transmission range have become essential for race and midrace engines. The Stage6 R/T variator offers revised roller curves (optimised for R/T engines) for 19x15.5mm weights, which results in more consistent rpms throughout the acceleration phase. The precise surface angles...
Reference: S6-98006
Brand: Stage6
Bike Stand (Paddock Stand) Stage6 MK3 for Piaggio / Minarelli / Peugeot. The Stage6 paddock stand has been revised again, this time the main focus when developing the next generation was on stability and precision to make the stand even more robust, durable and resistant. The logos on the white tires have been spruced up, and there is now also a Stage6...
Reference: S6-28KH-005/ND
Brand: Stage6
Ideal kit to set up your carburetor. 10 pilot jets in a handy plastic box, which makes it easier to grab the right one. And it's also cheaper than buying the jets individually. A set includes 10 pilot jets. There are different sets for all 21 to 28mm Stage6 PWK carburetors and 28-34mm Koso, each available in two different ranges of sizes.10 pieces, 35,...
Reference: MF24.16607
Brand: Motoforce
A high-quality replacement piston from Motoforce available for a fair price. Suitable for original cylinders! Comes with piston rings, clips and gudgeon pin.
Reference: MF24.19504
Brand: Motoforce
A high-quality replacement piston from Motoforce available at a fair price. Suitable for original cylinders! Comes with piston rings, pin and clips.
Reference: MF26.166P03
Brand: Motoforce
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
Reference: MXS06139050
Brand: MXS Racing
Replacement piston ring for the GP90cc 70cc cylinder kit.
Reference: MXS61446476
Brand: MXS Racing
Replacement piston ring for the MXS Racing 70cc cylinder kit.
Reference: S6-72ET001
Brand: Stage6
Reference: S6-75KR02
Brand: Stage6
Reference: S6-75KR01
Brand: Stage6
Reference: S6-75KO02
Brand: Stage6
Replacement piston for the Stage6 MKII Sport Pro 70cc cylinder kits. Please choose your engine type and the required piston pin diameter.
Reference: S6-75KO03
Brand: Stage6
Replacement piston for the Stage6 R/T 95cc cylinder kits
Reference: S6-71KO06.1
Brand: Stage6
Replacement Piston for the Stage 6 Streetrace 50cc 10mm minarelli
Reference: S6-71KO04.1
Brand: Stage6
Replacement Piston for the Stage 6 Streetrace 50cc 12mm Minarelli / Piaggio
Reference: S6-72166ET01
Brand: Stage6
Replacement piston for Stage6 streetrace.
Reference: S6-72168ET011
Brand: Stage6
Replacement Piston for the Stage 6 Streetrace 70cc Minarelli Vertical
Reference: S6-72140ET01
Brand: Stage6
Replacement piston for Stage6 streetrace 70cc kits.
Reference: MF99.00054
Brand: Motoforce
This is the most inexpensive tool to lock the variator. It can simply be inserted into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. PLEASE BE VERY CAREFUL when you employ this tool; otherwise you can damage the piston top!
Reference: MF99.00053
Brand: Motoforce
This is the most inexpensive tool to lock the variator, available in two versions. It can simply be threaded into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. Please employ this tool carefully; otherwise you can damage the...
Reference: MF99.00055
Brand: Motoforce
This is the most inexpensive tool to lock the variator, available in two versions. It can simply be threaded into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. Please employ this tool carefully; otherwise you can damage the...
Reference: KH-PJ-26
Brand: Stage6
Powerjets for Stage6 type PWK 21 to 28mm carb. The powerjets make it possible to drive with a lean mixture through a smaller main jet at about 3/4 throttle to full throttle, which ensures better acceleration on the straights. The power jet provides the carb with additional fuel at full throttle so that the mixture cannot become too lean. If you don't want...
Reference: S6-2014011P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: S6-2016602P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: S6-2014012P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: S6-45ET016
Brand: Stage6
Spare part for the Stage6 MK2 internal rotor ignition. Can also be used for the MK1 internal rotor ignition and other PVL ignitions. The CDI is preloaded with the latest 2 ignition curves from Stage6. Plug & Play for those who don't want to deal with the programming function. CDI WITH VARIOUS OPTION The Stage6 R/T CDI offers you 3 options: Option 1:...
Reference: S6-45ET017
Brand: Stage6
Programming software and hardware for Stage6 R/T internal rotor ignition. The Stage6 R/T ignition comes with a CDI with 2 pre-programmed ignition curves. If you want to go a step further, you can use this software to reprogram the CDI to match your individual setup and preferences.The kit includes the necessary hardware interface and the software in...
Reference: MF48.00020
Brand: Motoforce
This makes taking off the carburettor so much easier. Simply put this coupling in between the fuel hose and when disconnecting, the hose will be closed automatically at both sides, so that no fuel can escape! Especially useful for racing engines with drilled fuel tap or simple fuel tap!
Reference: STR-052.74
Brand: Str8
New reinforced quality. If you think that TNT grids have so far been way too flimsy, you will be thrilled: 2 new anodised aluminium grids in different sizes and hole patterns. Just the right thing to attach behind body apertures such as radiator vents. Can easily be handled, available in 12 great colours.
Reference: MF29.505
Brand: Motoforce
Dimensions (WxHxD): 195x205x35mm
Reference: MF29.509
Brand: Motoforce
Dimensions (WxHxD): 235x110x40mm
Reference: S6-140070
Brand: Stage6
The best way to use a 4 piston caliper on a Aerox engine. This item does not work with the 2 OEM brake mounts, it has to be drilled and bolted under the OEM mounts.
Reference: L-SA91992
Brand: Scootertuning.ca
Replacement rear brake caliper for Yamaha Aerox / MBK Nitro.
Reference: MF44.00400
Brand: Motoforce
You want disc rear disc brake for your convertion? This is the motoforce rear disc for lower price.