List of products by supplier: Racing-Planet

• 

  CAD$ 22.99 In Stock

  Reference: NK100.27

  Brand: Naraku

  

  Cylinder gasket set Naraku 50cc

  Complete cylinder gasket set for all 39mm Naraku or original 4-stroke cylinder sets. Kit contains all necessary gaskets from the cylinder base up and is an exact replacement for the original cylinder and Naraku cylinder sets with 39mm/50cc capacity.

  CAD$ 22.99

  Add to cart More

  Add to Compare
• 

  CAD$ 23.99 In Stock

  Reference: NK104.44

  Brand: Naraku

  

  Cylinder gasket set Naraku 50cc for Piaggio 4-stroke

  These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 4-stroke cylinders, but are also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.

  CAD$ 23.99

  Add to cart More

  Add to Compare
• 

  CAD$ 22.99 In Stock

  Reference: NK100.19

  Brand: Naraku

  

  Cylinder gasket set Naraku 72cc

  Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly suited to the Naraku 47mm cylinder sets and Chinese 47mm cylinder sets.

  CAD$ 22.99

  Add to cart More

  Add to Compare
• 

  CAD$ 23.99 In Stock

  Reference: NK100.58

  Brand: Naraku

  

  Cylinder gasket set Naraku 90cc for GY6 50cc

  Complete cylinder gasket set for all 51mm and 52.4mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly suited to the Naraku cylinder sets.

  CAD$ 23.99

  Add to cart More

  Add to Compare
• 

  CAD$ 82.99 In Stock

  Reference: GY28520

  Brand: Scootertuning.ca

  

  Cylinder head assy with SAS for GY6 150cc 157QMJ

  GY6 150cc complete cylinder head suitable for the 157QMJ engines.The cylinder head is supplied with a connection for the secondary air system. Note: After installation, please always check the valve clearances.

  CAD$ 82.99

  Add to cart More

  Add to Compare
• 

  CAD$ 81.99 In Stock

  Reference: GY28521

  Brand: Scootertuning.ca

  

  Cylinder head assy without SAS for GY6 150cc 157QMJ

  GY6 150cc complete cylinder head suitable for the 157QMJ engines. This cylinder head is not supplied with a connection for the secondary air system and can be used as a straight forward replacement or a replacement with heads that currently have the SLS secondary air system. Can also be used on the 125cc scooters that have the 150cc big bore fitted. Note:...

  CAD$ 81.99

  Add to cart More

  Add to Compare
• 

  CAD$ 49.99 In Stock

  Reference: GY15442

  Brand: Scootertuning.ca

  

  Cylinder head cover with SAS GY6 125-150cc

  Valve cover for GY6 125/150cc 4-stroke 152/157QMI engines WITH SLS system. The valve cover is ready to install and delivered as shown. Valve cover gasket not included and must be ordered separately.

  CAD$ 49.99

  Add to cart More

  Add to Compare
• 

  CAD$ 48.99 Out of stock

  Reference: BT14733

  Brand: Scootertuning.ca

  

  Cylinder head cover with SAS GY6 50cc 139QMB/QMA

  Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve cover gasket is NOT included and must be ordered separately.

  CAD$ 48.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 25.99 In Stock

  Reference: GY14192

  Brand: Scootertuning.ca

  

  Cylinder head cover without SAS GY6 125-150cc

  Valve cover for cylinder heads without SLS. For all GY6 125/150cc 152/157QMI engines.

  CAD$ 25.99

  Add to cart More

  Add to Compare
• 

  CAD$ 26.99 In Stock

  Reference: BT13863

  Brand: Scootertuning.ca

  

  Cylinder head cover without SAS GY6 50cc 139QMB/QMA

  Original valve cover for Chinese-built GY6 4-stroke 139QMB/QMA engines. The cover is dispatched without an SLS connection [secondary air system]. This means it can be used as a replacement for defective original items, or to blank-off the SLS. This makes the engine quieter and helps it perform better. When installing, you need only change over the...

  CAD$ 26.99

  Add to cart More

  Add to Compare
• 

  CAD$ 5.99 In Stock

  Reference: BT20019

  Brand: Scootertuning.ca

  

  Cylinder head gasket 50cc 39mm for 139QMB/QMA

  Cylinder head gasket (50cc = 39mm) - GY6 50cc

  CAD$ 5.99

  Add to cart More

  Add to Compare
• 

  CAD$ 4.99 In Stock

  Reference: GY28522

  Brand: Scootertuning.ca

  

  Cylinder head gasket for GY6 150cc

  Matching cylinder head gasket for maxi scooters with 150cc GY6 engine

  CAD$ 4.99

  Add to cart More

  Add to Compare
• 

  CAD$ 5.99 In Stock

  Reference: NK156.51

  Brand: Naraku

  

  Cylinder Head Gasket Naraku Piaggio

  Piaggio 50cc Air Cooled cylinder head gasket.

  CAD$ 5.99

  Add to cart More

  Add to Compare
• 

  CAD$ 36.99 In Stock

  Reference: NK102.82

  Brand: Naraku

  

  Cylinder Head Naraku 50cc 10mm Minarelli Horizontal

  Replacement cylinder head from Naraku suitable for air-cooled horizontal Minarelli 50cc cylinders and CPI, Keeway scooters with 1E40QMB / 1PE40QMB engines (Minarelli clone). The cylinder head fits on the original cylinder and replica 50cc cylinder kits from other manufacturers. Attention on Chinese engines: This cylinder head uses a short thread spark...

  CAD$ 36.99

  Add to cart More

  Add to Compare
• 

  CAD$ 41.99 In Stock

  Reference: NK102.83

  Brand: Naraku

  

  Cylinder Head Naraku 70cc 10mm Minarelli Horizontal

  This Naraku cylinder head requires the use of a short thread spark plug (NGK type H means short thread) such as BR8HSA, BR8HS. Attention: some Chinese engine manufacturers like Keeway, CPI etc. use from the Euro 2 models year 2003- an original spark plug type E with long thread like e.g. BR7ES. Those spark plugs do not fit here!

  CAD$ 41.99

  Add to cart More

  Add to Compare
• 

  CAD$ 179.99 In Stock

  Reference: NK100.13

  Brand: Naraku

  

  Cylinder head Naraku GY6 50cc 139QMB/QMA

  Common problems with stock cylinder heads on the Chinese 4-stroke engines are generally known to be expensive and involve high costs. Chinese replacement cylinder heads for GY6 engines are only of medium build-quality. Help comes in the form of a well-manufactured replacement cylinder head from NARAKU, made to Taiwanese manufacturing. The cylinder head is...

  CAD$ 179.99

  Add to cart More

  Add to Compare
• 

  CAD$ 499.99 In Stock

  Reference: NK600.48

  Brand: Naraku

  

  Cylinder Head Naraku Racing Bws 125

  4-valve racing cylinder head for use on big bore cylinders for Yamaha 5ML engines. The cylinder head features stiffer valves and springs. The inlet valves have a diameter of 22.3mm and the exhaust valves 20.3mm. Inlet connection: 25mm, exhaust has a cross section of 24mm. Not for 125cc original cylinders.

  CAD$ 499.99

  Add to cart More

  Add to Compare
• 

  CAD$ 8.99 In Stock

  Reference: NK101.86

  Brand: Naraku

  

  Cylinder Head Nuts M7x1mm Naraku (Minarelli)

  M7 threaded cylinder head nut, set of 4. 13mm long with collar. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines with M7 cylinder studs. The nuts can of course be used for other purposes.

  CAD$ 8.99

  Add to cart More

  Add to Compare
• 

  CAD$ 2.99 In Stock

  Reference: BT15631

  Brand: Scootertuning.ca

  

  Cylinder head secondary air system gasket GY6 50cc

  SLS [secondary air system] gasket – 139QMB/A

  CAD$ 2.99

  Add to cart More

  Add to Compare
• 

  CAD$ 103.99 In Stock

  Reference: BT13851

  Brand: Scootertuning.ca

  

  Cylinder head with SAS GY6 50cc 139QMB/QMA

  Complete cylinder head for 50cc 139QMB / QMA engines. Unlike many other available cylinder heads, this is a complete head. That means: valves, valve springs, valve shaft seals etc. This head is ready to install, with no need for grinding valves or fumbling with springs, or specialist tools. Dispatched ready to accept SLS. Cam shaft and rocker arm assembly...

  CAD$ 103.99

  Add to cart More

  Add to Compare
• 

  CAD$ 84.99 In Stock

  Reference: BT12277

  Brand: Scootertuning.ca

  

  Cylinder head without SAS GY6 50cc 139QMB/QMA

  Complete cylinder head for 50cc 139QMB / QMA engines. Unlike many other available cylinder heads, this is a complete head. That means: valves, valve springs, valve shaft seals etc. This head is ready to install, with no need for grinding valves or fumbling with springs, or specialist tools. Dispatched without SLS. This can be blanked off, which leads to...

  CAD$ 84.99

  Add to cart More

  Add to Compare
• 

  CAD$ 84.99 In Stock

  Reference: GY27396

  Brand: Scootertuning.ca

  

  Cylinder kit 150cc for GY6 125-150cc

  150cc Cylinder kit for all 125/150cc 4 stroke Chinese scooters which use the GY6 157QMI or 152QMI engines. Can be used as a direct replacement for 150cc engines as standard or a performance upgrade to 125cc engines. If fitting to a 125cc scooter then necessary up jetting will be required (approx 10%). Kit is supplied with required top end gaskets, barrel,...

  CAD$ 84.99

  Add to cart More

  Add to Compare
• 

  CAD$ 59.99 In Stock

  Reference: BT27364

  Brand: Scootertuning.ca

  

  Cylinder kit 50cc GY6 50cc 139QMB/QMA

  50cc Cylinder kit for all 50cc 4 stroke Chinese scooters which use the GY6 139QMB/QMA engines. An ideal low cost replacement kit for those worn or damaged top ends. Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.

  CAD$ 59.99

  Add to cart More

  Add to Compare
• 

  CAD$ 73.99 In Stock

  Reference: IP12478

  Brand: Scootertuning.ca

  

  Cylinder kit 50cc Piaggio AC

  Great price cylinder kit for air-cooled Piaggio engines. The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder head can be ordered...

  CAD$ 73.99

  Add to cart More

  Add to Compare
• 

  CAD$ 77.99 Out of stock

  Reference: BT27365

  Brand: Scootertuning.ca

  

  Cylinder kit 72cc GY6 50cc 139QMB/QMA

  72cc (47mm) kit for all 50cc 4 stroke Chinese scooters which use the GY6 139QMA/QMB engines and Kymco 4T. A low cost performance upgrade to stock 50cc engines. Carburettor will need up jetting (approx 10%). Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.

  CAD$ 77.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 279.99 In Stock

  Reference: 01300540

  Brand: Airsal

  

  Cylinder kit Airsal Alu-Sport 50cc CPI GTR (12mm)

  We can offer you the Airsal 50cc Sport for the most common scooter models. It has a chrome-nikasil coated bore and is made of aluminium, which has better heat dissipation properties than cast-iron cylinders. The performance is comparable with the Polini Sport. A bigger carb is not necessary, but the main jet should be adjusted. Piston Pin : (12mm)

  CAD$ 279.99

  Add to cart More

  Add to Compare
• 

  CAD$ 134.99 Out of stock

  Reference: 2320141

  Brand: Airsal

  

  Cylinder kit Airsal Sport 50cc Hyosung

  High performance aluminum cylinder kit from Airsal with 49.3cc displacement and hard-coated cylinder liner. Compared with cylinders made of cast iron, the aluminum cylinder has significantly better heat dissipation meaning the cylinders are less susceptible to wear and piston seizure due to temperature problems. The Airsal Sport continues its power very...

  CAD$ 134.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 149.99 Out of stock

  Reference: NK702.01

  Brand: Naraku

  

  Cylinder kit Naraku 100cc Yamaha Bws/Zuma 100cc

  Naraku cast iron cylinder for scooters with 100cc Minarelli engines, for those looking for a top quality replacement following cylinder or piston damage. This is a good-quality product, identical to the original in design and performance. Very good value for money. Delivery includes gaskets. Original head is retained. Piston pin: 14mm. Diameter piston:...

  CAD$ 149.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 179.99 In Stock

  Reference: NK702.02

  Brand: Naraku

  

  Cylinder kit Naraku 113cc Yamaha Bws/Zuma 100cc

  High-torque, everyday NARAKU 113cc cylinder kit for all scooters with 100cc Minarelli engines. This cylinder kit is not designed for the higher rev range, its strengths lie lower down. Just above the idle speed comes constant and progressive acceleration, without straining the engine at unnecessarily high revs. The drive from standstill provides excellent...

  CAD$ 179.99

  Add to cart More

  Add to Compare
• 

  CAD$ 199.99 In Stock

  Reference: NK600.37

  Brand: Naraku

  

  Cylinder kit Naraku 125cc Bws 125

  Complete cylinder kit with all gaskets and small parts for fitting. This 125cc Naraku cylinder yields engine performance corresponding to the original. Thus ideal as a top quality inexpensive replacement for a defective original cylinder. The piston features the Naraku wear-reducing coating, as found in most other Naraku kits. The running-in period is...

  CAD$ 199.99

  Add to cart More

  Add to Compare
• 

  CAD$ 159.99 In Stock

  Reference: NK600.10

  Brand: Naraku

  

  Cylinder kit Naraku 125cc for GY6 125-150cc

  Complete cylinder kit with all gaskets and parts for fitting. This 125cc Naraku cylinder delivers engine performance corresponding to the original. Thus ideal as a top quality inexpensive replacement for a defective original cylinder. The piston features the Naraku wear-reducing coating, as found in most other Naraku kits. The running-in period is...

  CAD$ 159.99

  Add to cart More

  Add to Compare
• 

  CAD$ 179.99 In Stock

  Reference: NK600.52

  Brand: Naraku

  

  Cylinder kit Naraku 150cc (57.4mm) for GY6 125-150cc

  Complete cylinder kit with all gaskets and small parts for fitting. This 150cc Naraku cylinder yields engine performance corresponding to the original cylinder of 150cc GY6 and Kymco AC engines. Thus ideal as an inexpensive replacement for a defective original cylinder. The cylinder kit can also be used to increase the performance of 125cc GY6 and Kymco...

  CAD$ 179.99

  Add to cart More

  Add to Compare
• 

  CAD$ 319.99 In Stock

  Reference: NK600.27

  Brand: Naraku

  

  Cylinder kit Naraku 150cc (Kymco G-Dink 125)

  NARAKU Performance is offering this cylinder kit for all water-cooled 125cc Kymco 4-stroke engines at a fair price. Many Kymco riders know the Yager or Bet & Win models to have 150cc engines in other European countries. With this complete kit now a conversion is possible where you live. This set contains all necessary mounting components. Simply swap...

  CAD$ 319.99

  Add to cart More

  Add to Compare
• 

  CAD$ 189.99 In Stock

  Reference: NK600.03

  Brand: Naraku

  

  Cylinder kit Naraku 160cc (58.5mm) for GY6 125-150cc

  160cc big bore kit for GY6 125/150cc + engines. The bore is 58.5 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). This cylinder can be used with the original cylinder head. And if that wasn’t enough, a modified camshaft with adjustable timing is...

  CAD$ 189.99

  Add to cart More

  Add to Compare
• 

  CAD$ 269.99 In Stock

  Reference: NK600.03F

  Brand: Naraku

  

  Cylinder kit Naraku 160cc Forged Piston (58.5mm) for GY6 125-150cc

  160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engine (Scooter) and most Chinese import 125/150cc Scooter, Quad and Buggies. This cylinder kit can be used with the original cylinder head. For those who want even more, there is a camshaft with modified timing....

  CAD$ 269.99

  Add to cart More

  Add to Compare
• 

  CAD$ 389.99 In Stock

  Reference: NK600.28

  Brand: Naraku

  

  Cylinder kit Naraku 175cc (Kymco G-Dink 125)

  For riders looking for a substantial performance increase for their water-cooled 125cc Kymco 4-stroke engine, there is now a gritty performance set from NARAKU performance. The bore of the cylinder was increased to 62mm and now gives a capacity of 175cc, which clearly lets the torque of the engine be felt. Now Kymco enthusiasts can keep up with their...

  CAD$ 389.99

  Add to cart More

  In Stock

  Add to Compare