No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
Reference: T9921310
Brand: Top performances
This is the complete gasket set for 70cc Top Performances TPR cylinder kit. Check the picture to see which gaskets are included.
Reference: 11131046
Brand: Airsal
Replacement piston ring for the Airsal Alu-Sport 70cc cylinder kit minarelli horizontal air cooled.
Reference: 063006476
Brand: Airsal
Replacement piston for the Airsal Alu-Sport 70cc cylinder kit for CPI GTR.
Reference: 061337476
Brand: Airsal
Replacement piston for the Airsal Alu-Racing 70cc cylinder kit minarelli horizontal air cooled.
Reference: MK830A0530
Brand: Metrakit
Replacement piston ring for Metrakit Prorace 3 70cc Cylinder kit.
Reference: TH10BGY6125-1000
Brand: Scootertuning.ca
Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...
Reference: 203.0123
Brand: Polini
Polini air filter element having a two-layer foam, allows the maximum filtration efficiency with optimum performance. The Double Layer air filter is suitable for Aprilia SR 50 2T (Piaggio engine).
Reference: WP-2590
Brand: Buzzetti
Choice of headlamp bulbs in OEM quality. Please check whether this corresponds with voltage and base of the original bulb before ordering. H4 (HS1) 12V/35W
Reference: MF99.00502
Brand: Scootertuning.ca
This is a special torx key (with hole) for easy removal of security torx screws with pin (I-Torx), as they are used e.g. for inlet manifolds on Piaggio or for Peugeot engine covers.
Reference: IP34891
Brand: Scootertuning.ca
Low-priced brake disc. The disc has a 3 bolt attachment and a diameter of 190mm. Suitable for front and rear disc brakes with 190 mm outside diameter. Outside diameter: 190mm. Internal diameter. Mounting: 58mm. Thickness: 4.0mm. Bolt holes: 3. Bolt hole diameter: 10.5mm. Type: Standard
Reference: S6-5614027
Brand: Stage6
The R/T front pulley has been developed specifically for the R/T Oversize CVT kit, forming a drive train with better performance and better power transmission. The pulley's angle has been adjusted to the R/T variator, but the pulley can also be used with the SportPro variator. Also included in the delivery is the Stage6 R/T fan.
Reference: TRT-2005
Brand: 2Fast
The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System. Available in 70, 98cc Piaggio.
Reference: 16710-GET-013
Brand: Honda
Honda Ruckus OEM Replacement Fuel Pump.
Reference: 4VP-13178-00-00
Brand: Yamaha
Yamaha OEM replacement part. Oil pump gear.
Reference: S6-7516611
Brand: Stage6
Finally it’s here: The cylinder that we all have been waiting for! Based on the well-known, record-breaking 70cc cylinder, this 95cc version promises amazing power and a lot of potential for new record performances! Unlike other common tuning parts companies where “big bore” simply means that the bores have been enlarged, Stage6 has also re-designed...
Reference: 1073450
Brand: Airsal
The Airsal Racing Extrem Cylinder is now also available in a 70cc version. As can be expected from a high-end cylinder, it comes with a coated piston made by Vertex featuring a single ring. The original 10 mm small end bearing would have been too feeble, which is why the kit is only available as a 12 mm version. Just like the MHR TEAM 2, the Racing Xtrem...
Reference: 028479B
Brand: Malossi
Intake Manifold Malossi NBR 21x27mm Minarelli vertical
Reference: P400485135001
Brand: Athena
Athena offers a complete range of components for powering the engine. With these products, even the most demanding customer will find the best configuration for dosing the fuel-air mixture under all power delivery conditions.
Reference: 78-60010
Brand: Moto Tassinari
The unique design of the VForce reed valve system features double the reed tip surface over a conventional reed valve design. This has two major benefits: 1) The reed petals only travel half the distance as a conventional reed valve design to get the same airflow. 2) Because the reed petals only need to travel half the distance of that on a conventional...
Reference: 6112801B
Brand: Malossi
Replacement overange variator hub
Reference: TH60ADIO50-10FGRA/GO
Brand: Scootertuning.ca
CNC Aluminium forged wheel for Honda Dio & Elite. Front hydrolic disc brake conversion required.
Reference: TGSPHS
Brand: Tecnigas
Replacement Heat Shield for Tecnigas Silent Pro Exhaust
Reference: 83545-K26-B00ZB
Brand: Honda
Replacement OEM Honda Parts.
Reference: 150.0603
Brand: Polini
70cc cast iron racing cylinder kit by Polini for scooters equipped with air-cooled Morini engines. The cylinder has a 47mm bore and achieves an output of 8.2bhp at 8,400RPM according to manufacturer.
Reference: 34901-MJ6-732
Brand: Honda
Replacement OEM Honda Parts.
Reference: 1CD-E4410-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: BM013392
Brand: Scootertuning.ca
Reference: 41-720
Brand: RK Chain
Clip or Rivet type connecting link for the RK 420 MXZ Chain.
Reference: 6113027
Brand: Malossi
Malossi X K Belt is the top of racing transmission belts Made with hard-wearing materials combined with Kevlar® inserts, Malossi trapezoidal X K belts provide a very high thermal and abrasion resistance. Worthy exponents of MALOSSI HYPER RACING product range, they are the result of decades of experience and of search for absolute performance in the racing...
Reference: 1414486
Brand: Malossi
Filter with double layers; the first layer has medium sized micro-pores to capture coarse dirt particles, while the second layer has very fine sized micro-pores to capture microscopic dust particles, the most damaging. TECHNICAL SPECIFICATIONS; Filters made of polyurethane foam, self-extinguishing, two layers coupled by a special hot forming process that...
Reference: RH-193
Brand: Ruckhouse
The Ruckhouse CNC GROM bars are as low and race like as you can get without having to trim the bodywork. Just unbolt your stock bars, and bolt the main plate to your existing bar mounts. This also allows you to add risers or spacers if necessary to customize the bars. What is different from ours compared to others you ask. We have use Solid 6061 ROD to...
Reference: RH-140
Brand: Ruckhouse
Want to clean up the look of your factory levers? This is the perfect mod to make your grom look great. These are direct bolt in levers for your master cylinder and clutch lever on your honda grom. These billet levers have adjustable settings on them for your comfort along with a nice dark black anodized finish!
Reference: RH-177
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...