No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
Half pulley Polini Air Speed Evolution PRE: a pulley as it is also used...
Adaptable to minarelli. With over 70 years of experience, Polini is a...
Maxima 2T Castor 927 Race oil; excels...
Reference: 27-L0102
Brand: Motul
Blue-colored lubricant specially developed for the maintenance of foam air filters of off road bikes and quads. Improves air filter efficiency for better carburetion. Effectively retains dust, mud and sand for greater engine durability. Prevents water from entering the filter.
Reference: BT12014
Brand: Scootertuning.ca
Replacement Variator backplate for 139QMB/QMA
Reference: BT16003
Brand: Scootertuning.ca
Plastic carburettor cap for all GY6 4-stroke 50cc scooters 139 QMB/QMA
Reference: 16289
Brand: Scootertuning.ca
Crankshaft in high quality manufactured in Europe for Chinese 50cc 4-stroke engines and 4-stroke 50cc Kymco. High quality con rod tin much better quality than that used in the original engine. Strength and durability of the crankshaft thereby increase significantly. Top Racing crankshafts correspond to the size and shape to the original. Comes with...
Reference: NK100.53
Brand: Naraku
Naraku gudgeon pin in various sizes for GY6 139QMB/QMA engines. Please select the desired size based on the piston diameter from the list below. Suitable for Naraku cylinder sets and Chinese original or tuning cylinders
Reference: BT14733
Brand: Scootertuning.ca
Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve cover gasket is NOT included and must be ordered separately.
Reference: GY6-gas63-57
Brand: Taida
Taida Gasket set for 180cc cylinder kit (63mm)
Reference: GY6-gas61-57
Brand: Taida
Taida Gasket set for 170cc cylinder kit (61mm)
Reference: TH16AGY6-58508
Brand: Scootertuning.ca
Piston kit for the 160cc GY6 cylinders. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.
Reference: GY6-pis63-f
Brand: Taida
Taida Forged Piston kit (63mm / 180cc-205cc) 4-stroke for GY6 Engine.
Reference: GY6-pis63
Brand: Taida
Taida Piston kit (63mm / 180cc-205cc) 4-stroke for GY6 Engine.
Reference: GY6-pis63-f-4V
Brand: Taida
Attention! Only for Taida 4V Head! Taida Forged Piston kit (63mm / 180cc) 4-stroke for GY6 Engine.
Reference: GY6-ring67
Brand: Taida
Taida Piston rings (67mm / 232cc) 4-stroke for GY6 Engine.
Reference: GY6-ring63-0.8
Brand: Taida
Taida Piston rings (63mm / 180cc) 4-stroke for GY6 Engine.
Reference: GY6-pis67-f
Brand: Taida
Taida Forged Piston kit (67mm / 232cc) 4-stroke for GY6 Engine.
Reference: GY6-pis61
Brand: Taida
Taida Piston kit (61mm / 170cc) 4-stroke for GY6 Engine.
Reference: GY6-01054-63cf-75
Brand: Taida
High Quality 205cc Taida Cylinder with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power and the ceramic cylinder with more heat dissipation will help to avoid overheating. The bore is 63mm and need to be used with 66mm stroke crankshaft (205cc). Kit is suitable for all air-cooled 4...
Reference: GY6-01054-58.5c
Brand: Taida
High Quality 160cc Taida Cylinder kit for GY6 125/150cc + engines. The ceramic cylinder coating offer better durability with more heat dissipation and can stand higher temperature. The bore is 58.5mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies)....
Reference: GY6-030820-non
Brand: Taida
Taida Stroker crankshaft with 66mm stroke. This crankshaft is made to use in conjuction with Taida 67mm cylinder (232cc) and Taida 63mm (205cc). Attention! Studs and Chain not include.
Reference: 1118718B
Brand: Malossi
Reference: 3219999
Brand: Malossi
The Malossi Scooter Racing MHR exhausts have been conceived and manufactured with a single objective: to achieve the highest possible performance when paired with the 100 cc cylinder for which they were designed. All Scooter Racing exhausts are crafted from steel sheets with an exact and constant thickness of 0.8mm, laser-cut, and assembled with...
Reference: 3118679
Brand: Malossi
The most powerful thermal unit ever produced by Malossi: over 32 HP at 14,000 RPM. With its large displacement and flanged design, this kit is exclusively for liquid-cooled scooters. Specifically designed for top-level racing, it features the latest evolution of Malossi’s iconic 7-port technology. The standout feature is the support provided to the main...
Reference: S6-9616623
Brand: Stage6
It is a classic racing exhaust made of carefully hand-welded thin steel sheet cones, made in Italy. As is normal for high-end systems, the exhaust has a so-called racing finish, which means the body is unpainted and untreated. We recommend to apply grease spray regularly to avoid premature rusting. The exhaust comes with a high quality carbon silencer....
Reference: S6-197000/BK
Brand: Stage6
Stage6 offer here Motocross Aluminium Handlebar made of high quality 7075 aluminium and covered with a black epoxy paint. Include Stage6 R/T handlebar Foam! The Handlebar center diameter is 28,6mm (1''1/8). You will need triple clamp adaptor for Fat Bar.
Reference: FMF-SHGY6
Brand: FMF
We offer here Custom FMF Exhaust with Stainless header. Comes with all mounting hardware, Directly designed for GY6 engine with Fatty 7-8'' wheel.
Reference: 6215026BS
Brand: Malossi
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture). The most evident qualities of these brake pads due to their high friction...
Reference: 1414213
Brand: Malossi
Malossi's air box filter performs better due to its completely new updated design and larger size! Black compact polyurethane foam construction also provides the filter with a new look!
Reference: 2914024.Y0
Brand: Malossi
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application
Reference: TRS-CCBKRUK
Brand: TRS
GET 49cc CVT Cover Bolt Kit
Reference: 140.0207
Brand: Polini
Only one year after having introduced the Evo 3, Polini already presents a new version. The basic features have been kept: coated aluminium cylinder with T-shaped exhaust port and 6 transfer ports, all in a proven design. The exterior, however, has been completely revamped, with a round shape and side cooling pockets. The cylinder comes with a one-piece...
Reference: 9931270
Brand: Top performances
The Black Trophy is Top Performance’s successor to the Trophy cylinder series. The cylinders have been modified only slightly; quality and scope of delivery are similar. The Asso piston, however, is now partly molybdenum-disulfide-coated, which improves running smoothness and performance while minimising friction and thus heat development. This set-up...
Reference: HL-009
Brand: Hotlap
Just like seen on the Honda Ruckus, Hotlap came out with a Dual Slip-On exhaust with an optional Header to flow with the lines of the Honda Grom. It has the signature HotLap quality, but also looks really unique in general. These pipes all perform with a nice deep growl! This pipe is compatible with the stock 125cc engine; and also capable of performing...
Reference: NG1433
Brand: NG
NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All discs are TÜV Rheinland certified and road legal and come with federal operating approval. OEM-version matches the original item, but some models may vary.
Reference: RW-008
Brand: Rolling Wrench
This Rolling Wrench Beast mode EFI fuel tuner is just what you need when it comes to tuning your factory equipped fuel injected Zuma. This plugs into your stock harness. It will allow you to change the air fuel ratio (AFR) with the push of a few button. That sure beats taking your carburetor out multiple times like the old days :-). This unit will work...
Reference: 4516054
Brand: Malossi
A fashion line of aerodynamic and protective screens perfectly interchangeable with the originals, made with a superior acrylic PMMA material. Computer Aided Designed utilising precise dimensions to maximise rider visibility, a serious race enhancement for your scooter.
Reference: VC19878
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x25mm. For rear brake use on the Derbi Atlantis, Gilera and Piaggio models).