No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
Half pulley Polini Air Speed Evolution PRE: a pulley as it is also used...
Adaptable to minarelli. With over 70 years of experience, Polini is a...
Super light weight 3.75” round CF...
Reference: U-083
Brand: Scootertuning.ca
Reference: U-066
Brand: Scootertuning.ca
For ALUMINUM CYLINDER AXLE Ø 13 4-STROKE REFERENCE: 3113243
Reference: U-063
Brand: Scootertuning.ca
VESPA VESPA Primavera iGet 125 ie 4T euro 4 2016->2020 VESPA VESPA Primavera iGet 125 ie 4T euro 5 2021-> (MD11M) VESPA VESPA Primavera iGet 150 ie 4T euro 4 2016->2020 VESPA VESPA Primavera iGet 150 ie 4T euro 5 2021-> VESPA VESPA Sprint iGet 125 ie 4T euro 4 2016->2020 (MA13M) VESPA VESPA Sprint iGet 125 ie 4T euro 5 2021-> (MD11M)...
Reference: U-062
Brand: Scootertuning.ca
for SUZUKI SUZUKI BURGMAN AN 400 ie 4T LC euro 3 2010->2016 SUZUKI SUZUKI BURGMAN AN 400 ie 4T LC euro 4 2017->2020 (K432) SUZUKI SUZUKI BURGMAN AN 400 ie 4T LC euro 5 2021-> (K432) SUZUKI SUZUKI BURGMAN AN 400 ie 4T LC 2007->2009
Reference: U-046
Brand: Scootertuning.ca
Reference: U-034
Brand: Scootertuning.ca
Reference: U-017
Brand: Scootertuning.ca
Replacement Rotor for the MVT Digital Direct and Premium ignition
Reference: 3216582
Brand: Malossi
Designed to complete an optimal engine thermodynamic cycle, defined at the test bench and tested on rough road paths with strong slopes. Made of mild steel sheet, internally covered with soundproofing materials, featuring a reinforced “chicane”, epoxy-coating and aluminium die-cast heat shield.
Reference: 250.028
Brand: Polini
Maxi Speed clutch bell from the Polini Evolution range for Piaggio 125-300cc maxi scooters. The clutch bell is CNC machined from one piece so that bell 100% runs smoothly and no balancing required. The bell has very large ventilation openings which reduce the temperature again and give the clutch an aggressive look. Overall a very successful clutch bell...
Reference: 249.060
Brand: Polini
Polini Maxi Speed clutch for 200, 250 and 300cc Piaggio 4 stroke engines. This clutch features great design together with lightweight clutch blocks and reinforced friction plates. Altering the speed at which the clutch engages means the engine can be made to rev higher before the power comes in. This means greater drive, better performance on hills,...
Reference: 249.025
Brand: Polini
Polini Maxi Speed clutch for Piaggio maxi scooter engines. This clutch features great design together with lightweight clutch blocks and reinforced friction plates. Altering the speed at which the clutch engages means the engine can be made to rev higher before the power comes in. This means greater drive, better performance on hills, everyday use and...
Reference: 5114065
Brand: Malossi
Malossi's engineers fine tuned the New Generation Mutivar 2000 MHR variator. This new variator provides racing performance for your vehicle and is a valid alternative to the previous Sport-Touring version. The variator is supplied with two different roller sets in order to change the number of revolutions of the gear curve of your vehicle perfectly...
Reference: VC23673
Brand: Scootertuning.ca
Water pump repair kit for Honda FES Pantheon 125/ 150, SH Scoopy 125/ 150, NES @ 125/ 150 as well as SES Dylan 125/ 150 Maxi-scooters. All pictured parts included.
Reference: VC30848
Brand: Dayco
Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: VC24935
Brand: Bando
Top quality Bando drive belt from a world-leading manufacturer for scooters, quads or ATVs. Suitable for various 125, 150 and 200cc maxi-scooters and replaces OEM-No.: 23100KEC4900 / 51700700 / 00127785. Size: 781-20-30
Reference: 241.690
Brand: Polini
he Polini Maxi Hi-Speed variator is one of the strongest variators for Maxi scooters on the market. Emphasis has been placed on the construction of the roller tracks which utilise the existing power band of the engine providing an increase in torque. Variator provides increased acceleration and little more top end speed. Polini variators are excellent...
Reference: 01-00553
Brand: IRC
IRC Tough Tires for smaller machines. GS-45s are original equipment on the HONDA CRF80 & CRF100 and the KAWASAKI KLX110.
Reference: 01-00555
Brand: IRC
IRC offer here the best tire choice for Pee Wee racing with OEM approved.
Reference: W893.603025
Brand: Wurth
Also known as ''Green Loctite''. This one is used to increase the press-fit of 2 items.
Reference: BT16634
Brand: Scootertuning.ca
Crankcase cover for all vehicles with 12-13” wheels or larger and 4-stroke GY6 139QMB engines. These wheel sizes generally take a 788mm v-belt. Colour: silver, supplied as shown.
Reference: BT13921
Brand: Scootertuning.ca
Float bearing pin.
Reference: BT20812
Brand: Scootertuning.ca
Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean. Needle is 4cm long.
Reference: NK100.84
Brand: Naraku
This piston ring set for 72cc GY6 cylinders (47mm bore) is specially manufactured for the 72cc Naraku 4-stroke cylinder (NK100.47).
Reference: BT13938
Brand: Scootertuning.ca
Complete original quality aftermarket 47mm piston for 72cc cylinders. Delivery as shown. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pin circlips.
Reference: GY6-agas70-57-6
Brand: Taida
This cylinder spacer kit make it possible to use 150-232cc cylinder with stroker crankshaft and to adjust the correct piston height in the cylinder head.
Reference: GY6-gas62-54
Brand: Taida
Taida Gasket set for 175cc cylinder kit (62mm)
Reference: GY6-pis67
Brand: Taida
Taida Piston kit (67mm / 232cc) 4-stroke for GY6 Engine.
Reference: NK600.06F
Brand: Naraku
Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more durable and minimises friction. The raised piston skirt ensures a tighter fit.
Reference: GY6-01054-63cfh-4V
Brand: Taida
Attention! Only for taida 4V Head! High Quality 180cc Taida Cylinder with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power and the ceramic cylinder with more heat dissipation will help to avoid overheating. The bore is 63mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco...
Reference: GY6-2V-28/23
Brand: Taida
Taida Performance Oversize 28/23 vavle set for GY6 125-150cc engine.
Reference: GY6-06054-63
Brand: Taida
High Quality 205cc Taida Liquid Cooled Cylinder kit for GY6 125/150cc + engines. The bore is 63mm and need to be used with 66mm stroke crankshaft (205cc). Kit is suitable for all liquid cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). Attention! Boring required and this kit...
Reference: GY6-01054-63FH
Brand: Taida
High Quality 180cc Taida Cylinder kit with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power but more heating. The bore is 63mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies)....
Reference: VCR-SD960/AL
Brand: Voca
The new handlebar-clamps VOCA Racing 22-28 allow to easily change from 22mm to 28mm handlebars. Ultra light design, aggressive look and high quality aluminium – that’s what describes best the new VOCA handlebar-clamps. The complete set includes two handlebar-clamps which are fitted with M8 screws. The measures between the drillings are 34,80mm and...
Reference: TRS-PSPEXH/FATTY
Brand: TRS
The PSP Stainless Steel Exhaust with Carbon Fiber Tip Complete has undergone rigorous testing against the Yoshimura Exhaust, and it has been found to offer a 2 MPH gain in performance at a fraction of the cost. In collaboration with PSP R&D, this exhaust system has been optimized to offer the best performance on the Ruckus market, surpassing competitors...