No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
With the RS II, Tecnigas offers an...
Reference: IP32440
Brand: Scootertuning.ca
Drive Belt / Variator pulley plate for 125 and 150cc Honda 125 and 150cc 4 stroke and the Keeway Outlook maxi scooters.
Reference: 23674
Brand: Scootertuning.ca
Aramid-reinforced drive belt for increased service life, extra flexibility and better power transfer. For maxi-scooters with water-cooled 125-150cc Honda 4-stroke engines.
Reference: NK151.02
Brand: Naraku
Generator cover gasket with exact fit. Designed to replace the factory installed gasket.
Reference: 119.0046
Brand: Polini
Reference: 3111588
Brand: Malossi
Malossi Big Bore cylinder with 61mm bore for 169cc capacity with hard chromed liner. According to the manufacturer, the original head may be retained. Super unleaded should be used, owing to the change in compression ratio. Supplied with all necessary parts for installation. Suitable for all Maxi-scooters with 150cc Honda engines.
Reference: TUB1201
Brand: Yasuni
The Spanish manufacturer Yasuni offer here performance stainless steel exhaust for Kymco Agility 125. The sport design combined with the sound made it a very good choice. This exhaust is 3kg lighter than standard and offer a good torque and power increase (7.03HP @ 8,632RPM)
Reference: 249.019
Brand: Polini
Polini Maxi Speed clutch for Kymco 125 LC scooters. This clutch features great design together with lightweight clutch blocks and reinforced friction plates. Altering the speed at which the clutch engages means the engine can be made to rev higher before the power comes in. This means greater drive, better performance on hills, everyday use and traffic...
Reference: NK600.28
Brand: Naraku
For riders looking for a substantial performance increase for their water-cooled 125cc Kymco 4-stroke engine, there is now a gritty performance set from NARAKU performance. The bore of the cylinder was increased to 62mm and now gives a capacity of 175cc, which clearly lets the torque of the engine be felt. Now Kymco enthusiasts can keep up with their...
Reference: BT13910
Brand: Scootertuning.ca
Metal float bowl with accelerator pump. Suitable for all original and Naraku NK200.01 carbs for GY6 50cc engines 129 QMB/QMA.
Reference: BT13911
Brand: Scootertuning.ca
Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.
Reference: TH16AGY6-FG6108
Brand: Scootertuning.ca
Forged Piston kit for the 170cc GY6 cylinders. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.
Reference: GY6-ring62
Brand: Taida
Taida Piston rings (62mm / 175cc) 4-stroke for GY6 Engine.
Reference: GY6-pis62-f
Brand: Taida
Taida Forged Piston kit (62mm / 175cc) 4-stroke for GY6 Engine.
Reference: GY6-pis62
Brand: Taida
Taida Piston kit (62mm / 175cc) 4-stroke for GY6 Engine.
Reference: TH12AGY6125-6308-FORGED
Brand: Scootertuning.ca
180cc Forged piston cylinder kit for all 125/150cc 4 stroke Chinese scooters which use the GY6 157QMI or 152QMI engines. Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.
Reference: GY6-ROD-25.197
Brand: Taida
Replacement Conrod for Taida Crankshaft.
Reference: S6-9616621/BK
Brand: Stage6
It is a classic racing exhaust made of carefully hand-welded thin steel sheet cones, made in Italy. As is normal for high-end systems, the exhaust has a so-called racing finish, which means the body is unpainted and untreated. We recommend to apply grease spray regularly to avoid premature rusting. The exhaust comes with a high quality carbon silencer....
Reference: 3420218
Brand: Malossi
Reference: 349690
Brand: Malossi
Replacement Piston for the MHR Team Testa Rossa 70cc Flanged mount cylinder kit.
Reference: VCR-SD960/BK
Brand: Voca
The new handlebar-clamps VOCA Racing 22-28 allow to easily change from 22mm to 28mm handlebars. Ultra light design, aggressive look and high quality aluminium – that’s what describes best the new VOCA handlebar-clamps. The complete set includes two handlebar-clamps which are fitted with M8 screws. The measures between the drillings are 34,80mm and...
Reference: RH-062
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Several design available!
Reference: 4613598
Brand: Malossi
This superlative, compact and very light rear shock absorber was born out of the cooperation between Malossi designers and Paioli manufacturer. A real oil-gas suspension with variable setting and extension adjusting, compensated for a pressurized nitrogen chamber, provided with a special patented spring pre-load adjusting system in order to ensure an...
Reference: 6213319
Brand: Malossi
The "Newest Generation of Disk Brakes". Light, non corrosive, non-warping, antistress. Studied for prolonged use in all weather conditions and types of terrain. The "WHOOP DISCS" were exposed to numerous tests during competitions, giving Malossi technicians an opportunity to fine-tune the disk brakes for various vehicles. The "WHOOP DISC" paired with...
Reference: 2214135
Brand: Malossi
Special thermoplastic lines with stainless steel braiding and anodised aluminium fittings, homologated TUV. Super light and resistant to temperature and pressure changes results in precise lever feel and ultimately a confident ride.
Reference: 2913327
Brand: Malossi
Pre-hardened carbon steel springs for original clutch, with high yield strength, galvanically treated for extended protection. The different colouring indicates the load capacity of each spring series. The spring kit permits up to a 500 rpm clutch engagement with 150 rpm increments per spring type.
Reference: 2914023.R0
Brand: Malossi
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application
Reference: 6113806B
Brand: Malossi
The new fixed half-pulley for the Yamaha T-Max features a diamond finish of the belt-side pulley surface and a redesigned working angle to further increase the gearing range. This component completes the Multivar and renders it unparalleled! Suitable even to original variator. Note: In the event that the Ventilvar is coupled with the Multivar MHR,...
Reference: 2715092
Brand: Malossi
After the great success of 560cc bi-cylinder together with Double Power Cam, head valves could not miss! Malossi technicians have worked to achieve even better performance. These new valves have a bigger diameter and excellent materials and they are completely re-profiled in order to reach the best performance at all revolutions. These valves are...
Reference: 5913783
Brand: Malossi
Malossi is proud to offer "Super T-Max," a completely new gamma of products for the most popular Yamaha Maxi-Scooter and like always "Made In Italy"! Camshafts are the most critical timing component in a 4-Cycle engine. The camshafts, in fact, are assigned the tasks of controlling the air/fuel mixture in the combustion chamber by opening and closing the...
Reference: 7715582B
Brand: Malossi
Technical Specifications : Clutch Bell forged using Fe DC04 deep-drawing steel; Carbon steel centre hub made of round stock and TIG welded; Anti-vibration band welded using a 3 point 120° pattern; 100% dynamically balanced; Surface hardened through nitriding.
Reference: 5212819
Brand: Malossi
Maxi Fly clutch is the result of the experience that Malossi engineers have accumulated with the Maxi Delta Cutch adjustable automatic clutch. This new clutch has been designed and constructed to adapt perfectly to a standard vehicle and guarantee impeccable performance on all occasions. Maxi Fly Clutch is supplied pre-calibrated according to instructions...