No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
SMALL DAMAGE ON THE TIP
Reference: 203.0117
Brand: Polini
We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: BM01660
Brand: Scootertuning.ca
Remplacement throttle cable for PGO and Genuine Scooter.
Reference: STR-648.09
Brand: Str8
STR8 Tail Light w/ indicators featuring the standard required colours for brake and indicator lights. The indicators are now big enough to meet legal requirements, so this is an ideal replacement for older scooter models.
Reference: NK900.29
Brand: Naraku
NARAKU sports variator for Minarelli engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of the original variator is lifted giving a greater top end. The set comes with 5.8g Variator weights 15x12mm. These weights are suitable for scooters in original condition. If tuning components (e.g. exhaust system...
Reference: 322093
Brand: Tun'R
Tun'r conical air filter with type KN structure of oiled cotton. (28-35mm connection)
Reference: S6-75KR01
Brand: Stage6
Reference: S6-195010
Brand: Stage6
These are high-quality dual compound grips. Most versions are two-tone plus an all-black version for those who like it classic and simple. STAGE6 put a lot of effort into the design of their grips. The result are these unique looking grip sleeves that stand out from all other grips on the market and will make your scooter or moped a real eye-catcher. The...
Reference: 1118664B
Brand: Malossi
Replacement Gasket set for Malossi I-Tech 70cc 4 stroke cylinder kit.
Reference: S410130320002
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. The perfect part for all sports and Midrace cylinder.
Reference: 248.002
Brand: Polini
Belt and variator weights are the automatic scooter parts most likely to wear out. These heavy-duty POLINI belts will survive significantly longer than the original ones.
Reference: CR8EHIX-9
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning features than common CU...
Reference: 328117
Brand: Teknix
107mm Motoforce clutch in OEM quality, reproduction of the original part. An excellent replacement part !
Reference: 5PJ-H4169-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: BM04000
Brand: Scootertuning.ca
Looking for get the European Genuine/PGO Big Max Style with twin headlight instead of one bigger? There is the light you need. You will need to use the twin headlight cover in conjuction.
Reference: NK390.15
Brand: Naraku
GY6 Racing CDI with no rev limiter. This CDI features a performance optimised ignition curve: ideal for later tuning mods, such as a big bore kit. Only suitable for scooters with AC ignition system.
Reference: 90109-063F1-00
Brand: Yamaha
Yamaha OEM replacement part. Bolt used to hold the underseat on the frame.
Reference: STR-340.30
Brand: Stage6
Bellmouths are more and more common at drag races - and there are good reasons for this trend: they optimize the flow of drawn-in air to the carburettor. With this airflow optimization, the bellmouth has benefits throughout the rev range and therefore increases performance. Can be used either completely open for maximum air passage or combined with the...
Reference: TUB326
Brand: Yasuni
Great news for all of you who need an exhaust with euro road homologation but still don’t want to do without outstanding performance: Yasuni’s well-known and powerful Carrera 16 is now also available in a city version (Carrera 16.07) with restriction. The manifold has been slightly revised and now consists of several individual cones that have been welded...
Reference: 528798
Brand: Malossi
The Malossi fly clutch is a very robust high quality clutch. An ideal replacement for the original item. Clutch comes with a set of springs which are slightly stronger than the original ones, i.e. it engages at higher revs.
Reference: 201.1701
Brand: Polini
The CP is the first carburetor that has been completely developed by Polini and without a doubt one of best carburetor available. Special attention has been paid to size and weight: the carb is very compact and about 40% lighter as compared to traditional carbs. The compact design makes for a very short intake duct, which features a unique concentric...
Reference: STR-696.11/BT
Brand: Str8
STR8 LED indicators in a very stylish look. With their aerodynamic lines, they are a perfect match for many modern scooter models. As always, they come equipped with reliable LED technology and E-mark. Can be universally used and offers a choice of two body colours.Length: 90mm (thread 20mm)
Reference: SP-R6B
Brand: Ruckhouse
Ruckus R6 tail light kit 100% bolt on! The tail light is DOT. Include turn signal. Hardware and mounting bracket for Honda ruckus seat include!
Reference: SCTFR043
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: S6-0250
Brand: Stage6
Even slight blows can damage the ceramic surface or the electrode of a spark plug, but safely stored in this orange Stage6 box, your plug will be well protected from harm and can be taken to events etc. Especially recommendable for expensive racing plugs.
Reference: SCT-AER01
Brand: Ruckhouse
Everything you need to eliminate your stock Honda / Metropolitan air box with the most popular parts. When you remove your stock air box you will need to re-jet the carburetor. We recommend you add a performance exhaust at the same time so you are only tuning your carburetor once. Kit includes: Cone Mesh Emgo Air Filter, Intake tube with pvc fitting to...
Reference: S6-802010
Brand: Stage6
High quality silver small end bearing from Stage6. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. Attention: Cannot be used with Malossi and Stage6 cranks, only original crankshafts! dimensions: 12 x 17 x 15mm
Reference: IP19791
Brand: Scootertuning.ca
Oil hose. Over time a hose can become porous and oil can leak. This not only covers the engine, but means a loss of lubrication, which can cause engine damage. 1m universal hose 3x5mm. Can also be used as a pressurized hose.
Reference: 2011754
Brand: Malossi
A practical kit from Malossi to refurbish the MHR torque corrector bearings. It is suitable for the following parts: Torque corrector Malossi MHR 2005 (619733)Torque corrector Malossi MHR 2013 (6114590)Polini Evolution torque corrector (244.0574)Stage6 R/T Torque Corrector (S6-5616615)2Fast Passion torque corrector (TRT8000)Teknix torque corrector...
Reference: 451583
Brand: Tun'R
Tun'r offer here glue-on indicators ''raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 37464
Brand: Scootertuning.ca
Adjuster screw for the clutch or brake cable. Thread size M8. All too often, the threads of the adjustment screw break because the lock nut is not fastened properly. Result: the clutch or brake can not be adjusted properly. If biting point of the clutch is constantly changing or the transmission clunks, adjustment is required. A cheap and simple fix to...
Reference: 90506-20800-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: VC19077
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 95x20mm.
Reference: KH-PJ-26
Brand: Stage6
Powerjets for Stage6 type PWK 21 to 28mm carb. The powerjets make it possible to drive with a lean mixture through a smaller main jet at about 3/4 throttle to full throttle, which ensures better acceleration on the straights. The power jet provides the carb with additional fuel at full throttle so that the mixture cannot become too lean. If you don't want...
Reference: D1103/BK
Brand: Adelin
CNC brake lever for scooter with rear drum brake.
Reference: GY16359
Brand: Scootertuning.ca
Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.
Reference: BR9HIX
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning properties than common CU...