Top sellers

• 

  CAD$ 2.99 In stock

  Reference: MF96.90004

  Brand: Motoforce

  

  Nut Motoforce Variator & ignition M10x1.25mm

  Nut M10x1.25mm including washer for the crankshaft taper on the side of alternator and variator. Fits all Minarelli engines.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: MF96.90020

  Brand: Motoforce

  

  CVT Cover Bolt Motoforce M6x35 (Minarelli & Piaggio)

  We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: MF10.12166

  Brand: Motoforce

  

  Exhaust Gasket Motoforce Minarelli

  We can offer you high-quality exhaust gaskets for all common original and sport exhaust systems.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 32.99 Product available with different options

  Reference: S6-28DEL6-

  Brand: Stage6

  

  Main Jet Set Stage6 Dellorto 6mm

  Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 6mm main jets will fit all 12- 17.5mm and also 22mm Dellorto carburetors. Available in different ranges of sizes.

  CAD$ 32.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 65.99 In stock

  Reference: 618779

  Brand: Malossi

  

  Drive Belt Malossi X-Kevlar 820x17.5mm ATV

  This Kevlar reinforced drive belt is an absolute must-have for racing and high-end engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Reinforced with Kevlar fibre, this drivebelt can handle the strongest engines. The fact that this belt is a bit broader than the original one results in higher top speed, as the...

  CAD$ 65.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: 203.0094

  Brand: Polini

  

  Air filter Polini Short 90° Black (37mm)

  We can now offer you these air filters from Polini. With their 37mm, 90deg connections and a splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 37.99 Available in 4-20 days

  Reference: 362.00

  Brand: Polini

  

  Main Jet Set Polini Dellorto 6mm

  Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 6mm main jets will fit all 12- 17.5mm and also 22mm Dellorto carburetors. Available in different ranges of sizes.

  CAD$ 37.99

  More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 179.99 In stock

  Reference: 030738003

  Brand: Tecnigas

  

  Tecnigas Silent Pro Exhaust Minarelli Horizontal

  Nice results with an exhaust retaining an unobtrusive look – that’s what you get with the Tecnigas silent pro exhaust. Extra torque, and top speed is about 5 mph higher. The original look won't get you in trouble with the neighbors either.

  CAD$ 179.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: MF10.12140

  Brand: Motoforce

  

  Gasket Motoforce exhaust Piaggio

  We can offer you high-quality exhaust gaskets for all common original and sport exhaust systems. If you are not sure which gasket you need, you can simply measure the hole distance and diameter of your downpipe.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 7.99 In stock

  Reference: NK101.91

  Brand: Naraku

  

  Exhaust Stud Bolt set Naraku M6x32mm

  0Replacement studs with M6 thread at both ends, including M6 nuts for use on exhaust manifolds. Complete length: 32mm. set of 2 M6 studs and 2 M6 nuts. The nut length allows for solid mounting of the exhaust system, in a way that standard nuts cannot.

  CAD$ 7.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 0.99 In stock

  Reference: 097.0034

  Brand: Polini

  

  Polini Sticker 11 x 3.5cm

  Individual stickers with the well-known Polini logo, available in different sizes.

  CAD$ 0.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: IP25160

  Brand: Scootertuning.ca

  

  Exhaust Bolt M6x16 (2)

  Exhaust bolts for almost all cylinders. 20mm in length, 10mm spanner or flat head.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: IP11406

  Brand: Scootertuning.ca

  

  Exhaust Gasket Strengthened Version

  Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a sheet metal inner ring between the gasket material ensures optimal heat resistance and no blow through. Thickness: 3.5mm Suitable for almost all 50cc scooters.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 20.99 In stock

  Reference: S6-50ET001

  Brand: Stage6

  

  Clutch Springs for Stage6 Torque Control Hard

  In order to provide a late clutch engagement of the Stage6 Torque Control, there are several possibilities. One of the simplest and also most effective ones is to replace the springs and choose a fitting spring preload. These stiff springs offer a good compromise between clutch engagement at high revs and excellent traction.

  CAD$ 20.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: 070203/1

  Brand: Athena

  

  Gasket set Athena Sporting/Racing 70cc Minarelli horizontal AC

  Complete gasket set for Athena Sporting & Evolution cylinder kit. 

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 48.99 In stock

  Reference: 282.0002

  Brand: Polini

  

  Crankshaft Bearing Polini HQ Minarelli

  High-quality NTN 6204 C4 Crankshaft bearings available from the Polini's factory. Include 2 Viton oil seals with 2 crankshaft bearings.

  CAD$ 48.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 114.99 In stock

  Reference: 241.626

  Brand: Polini

  

  Variator Polini HI-SPEED Honda Ruckus 50

  These HI-SPEED variators are Polini's newest development. They are of high quality and feature an optimised ramp design.  The Polini Hi-Speed offers a combination of improved pull you can feel and a higher top speed. Made in Italy. Comes with 2 sets of rollers : 5.6gr and 6.9gr

  CAD$ 114.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 22.99 In stock

  Reference: 6616783b

  Brand: Malossi

  

  Small end bearing MHR TEAM 10mm (10x14x13mm)

  This new small end bearing has been designed specifically for 10mm crankshaft. High Quality bearing!

  CAD$ 22.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 11.99 In stock

  Reference: 298742B

  Brand: Malossi

  

  Clutch Spring Malossi Yellow 3.4K (Medium)

  Clutch springs for sport & racing clutches. Harder clutch springs result in clutch engagement at higer revs (and therefore higher power development) and gives much better acceleration from standstill.

  CAD$ 11.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 31.99 In stock

  Reference: 360.00

  Brand: Polini

  

  Main Jet Set Polini Dellorto 5mm

  Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 5mm main jets will fit 19-21mm Dellorto carburetors. Available in different ranges of sizes.

  CAD$ 31.99

  More

  In stock

  Add to Compare
• 

  CAD$ 39.99 In stock

  Reference: S41PLAT001

  Brand: Athena

  

  Drive belt Athena Racing Minarelli Long

  Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....

  CAD$ 39.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 66.99 Product available with different options

  Reference: STR-005.01/

  Brand: Str8

  

  Handlebar Stem STR8 Long

  This is the fitting stem for the STR8 handlebar. Massive CNC milled product with slightly slanted top. Available in a choice of colours.

  CAD$ 66.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 31.99 Product available with different options

  Reference: S6-28DEL5-

  Brand: Stage6

  

  Main Jet Set Stage6 Dellorto 5mm

  Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 5mm main jets will fit 19-21mm Dellorto carburetors. Available in different ranges of sizes.

  CAD$ 31.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 56.99 In stock

  Reference: 617152

  Brand: Malossi

  

  Front pulley Malossi Minarelli

  The fixed half of the Vario is located at the end of the crank near the kickstart mechanism. Its larger fins will cool the transmission more efficiently. The angle of the disc is designed for the MALOSSI variator, but it may also be used as a spare part for the original variator. Very robust construction. Package includes a locking washer.

  CAD$ 56.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: KW13990

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear Minarelli

  Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 269.99 In stock

  Reference: 166.0076

  Brand: Polini

  

  Cylinder kit Polini SPORT 70cc 10mm Minarelli Horizontal

  (10mm Gudgeon pin). The Polini Sport 70cc is a very durable high-performance cast iron cylinder for everyday use. This kit is known for its impressive top speed considering the category it belongs to, and even more for its excellent performance at low and mid rpm range. The perfect cylinder if you want to pull wheelies! It can be used with the original...

  CAD$ 269.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 329.99 In stock

  Reference: TUB902

  Brand: Yasuni

  

  Exhaust Yasuni R Minarelli Horizontal

  The big brother of the Yasuni Z ! Thanks to a larger expansion chamber and wider downpipe diameter, the Yasuni R is the ideal complement for 70cc sport and racing aluminium cylinders such as Athena Sporting and Stage6 Sport pro, but also very good with 70cc cast-iron sport cylinder kit. This exhaust is equipped with a classy Aluminium silencer, but also...

  CAD$ 329.99

  More

  In stock

  Add to Compare
• 

  CAD$ 96.99 In stock

  Reference: S6-SSP115/

  Brand: Stage6

  

  Throttle Grip Stage6 CNC Type

  Quick action throttle from Stage6 that will dwarf all grips on the market. Throttlegrip and switch unit are excellently finished state-of-the-art products CNC milled from aluminium. And the equipment leaves nothing to be desired either. The throttle has a universally programmable switch (e.g. for killswitch, NOS, starter). Several lock-in positions inside...

  CAD$ 96.99

  More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: JUN109R

  Brand: Scootertuning.ca

  

  Exhaust Gasket Yasuni

  Manifold gasket for Yasuni Scooter exhausts TUB306 / YA306, TUB307 / YA307, TUB709 / YA709, TUB710 / YA710, TUB901 / YA901, TUB902 / YA902.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: SCT-BP001

  Brand: Scootertuning.ca

  

  Front Brake Pads (Bws/Zuma – Pgo – Beamer)

  We can offer here Quality and Inexpensive remplacement brake pad for Zuma, Bws, Pgo, Beamer and more Scooter model.

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: 6215044BR

  Brand: Malossi

  

  Front Brake Pads Malossi MHR (Bws/Zuma - Pgo - Beamer)

  They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture). Brake Pads MHR are slower to reach working temperature but provide...

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 56.99 In stock

  Reference: 6117010

  Brand: Malossi

  

  Drive belt Malossi X-Kevlar Minarelli Long

  This Kevlar reinforced drive belt is an absolute must-have for racing and high-end engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Reinforced with Kevlar fibre, this drivebelt can handle the strongest engines. The fact that this belt is a bit broader than the original one results in higher top speed, as the...

  CAD$ 56.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: 297046.R0

  Brand: Malossi

  

  Torque spring Malossi Red (Hard) Minarelli

  We can offer various torque springs from Malossi. The main thing about adjusting an engine is to find the right combination of torque spring, variator weights and clutch springs. If the drive belt slips, you will have to go for a stiffer torque spring. On the other hand, choosing a spring that is too stiff will also reduce power output. If you have any...

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 30.99 In stock

  Reference: SCTFR013

  Brand: Scootertuning.ca

  

  Front fender Yamaha Bws/Zuma 02-11 Black

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 30.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 19.99 Out of stock

  Reference: SCT-BR001

  Brand: Scootertuning.ca

  

  Rear Brake Shoes (Bws/Zuma 2002-2011)

  We can offer here Quality and Inexpensive remplacement brake shoes for Bws/Zuma 2002-2011.

  CAD$ 19.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 32.99 In stock

  Reference: STR-003.00/

  Brand: Str8

  

  Downhill handlebar STR8

  This downhill handlebar has a cool, shot-peened look and is available in a choice of colours. Ends are open so as to allow for fitting anti-vibration handlebar weights. The fitting handlebar clamp can be ordered here for some models; if yours is not included in our product range, you can also search in bicycle shops for a fitting clamp with reduction...

  CAD$ 32.99

  More

  In stock

  Add to Compare