No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Sunworld PWK carburettor is a very...
Reference: IP24493
Brand: Scootertuning.ca
These stylish LEDs are the perfect accessory for upgrading any scooter, motorcycle and ATV, with 10mm thread (mounting also required a 10mm hole) Set contains two individual indicators. To ensure proper LED function, we recommend an LED indicator relays. 100mm in length (measured from fairing).
Reference: 2784
Brand: Tun'R
We can offer high-quality replacement shock absorbers from Tun'R. Attention: The shock absorber length of scooter models may vary; this shock absorber has a length of 25cm. Variations of +/-2.0cm can be installed without any problems.
Reference: 5518429
Brand: Malossi
Besides its improved fuel curves, efforts from Malossi’s technical staff resulted with a rev limiter increase of 1.700 RPM depending on the vehicle, making Force Master an even higher performing ECU! Force Master allows to change the injection in order to fit perfectly the Malossi 4-stroke and original cylinders. Carburation adjusting | ± 6% at...
Reference: 206.0200
Brand: Polini
Sold individually.
Reference: 249.050
Brand: Polini
Different from the 2G Evolution, Polini's 3G ForRace clutch has still been equipped with 2 shoes, but now it also comes with 3 shoes. Clutch engagement can be adjusted by exchanging the supplied springs. For fine adjustment, it is done with the help of a hex key wrench from the side. However, the springs haven't been positioned to face the front. So if...
Reference: 482333
Brand: Tun'R
Tun'r conical air filter with type KN structure of oiled cotton. (28-35mm connection)
Reference: MF12.00000
Brand: Motoforce
This inexpensive spare part adds a cool touch to your scooter. The lead is made of a rubber compound that is a bit softer than the one of the standard lead, so it can be stored away more easily.
Reference: MF30.16600
Brand: Motoforce
This Motoforce product is a bargain crankshaft in OEM quality; can be used as a replacement for the original crankshaft or in slightly tuned engines. Construction is the same as of the original part; with lubrication hole in the small-end.
Reference: TRS-GTW470/
Brand: TRS
Tired of cracking your tank cover plastics. Get rid of those honda Clips and use our Tank Washer with bolt and Nylock Nuts. Each pack comes with 4 CNC aluminum T-6160 Bilet washers and 4 m6x25mm stainless socket cap bolts and nylock nuts. Your choice of Red, Black, or Raw. Everything Made in America and Hard Anodized in America.
Reference: NK901.00
Brand: Naraku
NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best belts in the range. Size: 878-17-28
Reference: YA-S003
Brand: Yasusu
High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.
Reference: 482752
Brand: Teknix
Replacement throttle cable for CPI, Keway and E-ton scooters that using cable for carb and also for oil pump.
Reference: ESIL034ZSRD
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: STR-655.21/BK
Brand: Str8
Universal rear light with indicator operation from the Black Line series with tinted glass. Homologated for road use, this offers the chance to legally go for the popular LED option, e.g. when you've changed the fairing or when the original light can no longer be used. Size: 15x 8.5 cm.Please note that the homologation only applies to the rear light, not...
Reference: 2912658.W0
Brand: Malossi
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application.
Reference: NK201.08
Brand: Naraku
Naraku carburetor Black Edition for 70cc scooters and mopeds. Aluminium. Easy to tune, inconspicuous, and available in different designs. The carb features oil and pressure connections. No vehicle-specific use, adapters must be used for tight clearance fits. Manual choke.
Reference: 294964
Brand: Tun'R
Replacement engine cover from Tun'r available in wide color selection. The perfect final touch for your Scooter!
Reference: BZA30416
Brand: Scootertuning.ca
Universal manual fuel tap with 7mm connector, this tap is simply inserted between the fuel line enabling you to manage fuel supply.
Reference: 5PJ-H4144-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 0900-1005.10
Brand: NCY
This NCY performance scooter CDI igniter module works on most current AC GY6 50cc/150cc scooters made in China using the 139QMB/157QMJ engine. Higher voltage output, aggressive mapping as well as the removal of your rev limiter make this ideal for custom builds, or just simply trying to get a few more MPH's. A billet aluminum case protects this from road...
Reference: STR-667.00
Brand: Str8
These mechanical flashlight relays are ideal to solve the problem of LED indicators that flash too slow, too fast, or not at all. Can also be used in combination with standard bulbs. The typical clicking sound of a mechanical relay has been kept. Depending on your scooter model, you may also require the STR8 resistor (STR-667.10) for the LED indicators to...
Reference: MF16.30020
Brand: Motoforce
This mechanical fuel pump from Olympia is identical to the one from Mikuni, but available for a better price.The output is about 14l/h, which is absolutely sufficient for most 2-stroke engines. Recommendable for all highly tuned engines with big bore carbs (24mm and more).
Reference: NK201.09
Brand: Naraku
Naraku carburetor Black Edition for 70cc scooters and mopeds. Aluminium. Easy to tune, inconspicuous, and available in different designs. The carb features oil and pressure connections. No vehicle-specific use, adapters must be used for tight clearance fits. Manual choke.
Reference: BM00013
Brand: Scootertuning.ca
Remplacement crankcase half gasket for PGO and Genuine Scooter.
Reference: NK390.22
Brand: Naraku
Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Attention: If the double connector has a blue cable loop (e.g. on the new Rex models), this unit is not suitable. Only suitable for scooters with AC ignition system.
Reference: 171.0553
Brand: Polini
Polini presents the digital ignition kit for all the 50cc scooters equipped with liquid cooled Piaggio engines and liquid or air cooled Minarelli engines. The ignition kit includes: gear case support, stator and rotor, coil with CDI provided with the map of electronic advance ignition. The setup is very easy and it lets the advance to be mechanically...
Reference: TH40ADIO50-1642
Brand: Scootertuning.ca
Reference: 117568
Brand: Malossi
This is the complete gasket set for original for Malossi sport,replica and racing 70cc cylinders. Check the picture to see which gaskets are included.
Reference: TH40ADIO50-1741
Brand: Scootertuning.ca
Reference: BM04080
Brand: Scootertuning.ca
Reference: TRS-TCCVK
Brand: TRS
Throttle cable with a 75" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb
Reference: MF60.16612
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: MF48.00700
Brand: Motoforce
Oil hose from Motoforce. With time, the original hose will become porous and oil will leak out. This will result not only in a dirty engine but also in poor lubrication, which can lead to a much feared piston seizure. 1m - universally suitable.
Reference: 462602
Brand: Tun'R
Reference: PG0012
Brand: Stylepro
We offer here Stylepro 4mm jet set made for PGO and Genuine original carburettor available in different size.
Reference: 347849
Brand: Malossi
Replacement piston for Malossi Sport 70cc cylinder kits.