Top sellers

• 

  CAD$ 20.99 In stock

  Reference: S6-GSET

  Brand: Stage6

  

  Replacement rollers shells Stage6

  Replacement shells for variomatic adjustment set Stage6

  CAD$ 20.99

  More

  In stock

  Add to Compare
• 

  CAD$ 2.99 Out of stock

  Reference: MF96.90002

  Brand: Motoforce

  

  Cylinder Head nut M7x1mm Motoforce

  Nut M7x1mm for all studs at the cylinder head. Fits all Minarelli engines.

  CAD$ 2.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 369.99 Available in 4-20 days

  Reference: 119.0077/R

  Brand: Polini

  

  Cylinder Polini Corsa 70cc (AF16-AF18E)

  The Corsa is a Polini Powerfull Mid-Race 70cc cylinder improved from the Polini Sport 70cc cylinder. Extreme port timing, polished exhaust port and increased primary compression result signifiant power increase compared to standard 70cc cylinders with very good reliability. The piston is equipped with a chrome and a grey cast iron piston ring. To reach...

  CAD$ 369.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 6.99 In stock

  Reference: MF60.16658

  Brand: Motoforce

  

  Kickstart Castle Washer (13mm) Minarelli

  Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.

  CAD$ 6.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: NK390.09

  Brand: Naraku

  

  Coil Naraku Racing High output V2 1-Pin (Removable Tip)

  NARAKU Racing ignition coil with high-end secondary coiling. With this coil, the secondary voltage is almost doubled. The ignition voltage of the original ignition coil is approx. 16,000v. With the "race high tension coil" ignition from Naraku released 31,000v! The advantage lies in the better "translation" of the original input power. High ignition...

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: 203.0091

  Brand: Polini

  

  Air filter Polini Short 30° Black (37mm)

  We can now offer you these air filters from Polini. With their 37mm, 30deg connections and a splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this airfilter, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 Out of stock

  Reference: SCT-B1S015/CR

  Brand: Scootertuning.ca

  

  Side Stand Bolt-On Chrome (Bws/Zuma 2002-2011)

  We offer here 100% bolt on stand for Yamaha Bws/Zuma 2002-2011. This stand directly work without any modifications, no cutting, no welding. You simply install the stand with the ''U'' Bolt supplied and it's ready to use!

  CAD$ 44.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 39.99 In stock

  Reference: 248.003

  Brand: Polini

  

  Drive belt Polini Racing Minarelli Long

  Belt and variator weights are the automatic scooter parts most likely to wear out. These heavy-duty POLINI belts will survive significantly longer than the original ones.

  CAD$ 39.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 83.99 In stock

  Reference: 250.002

  Brand: Polini

  

  Clutch Bell Polini Speed 107mm Minarelli

  With the SpeedBell Polini offer an inexpensive clutch bell which can be used with 50 or 70cc setup. Speed Bells are the perfect replacement for the original clutch bell annealed and deformed. The Special alloy steel construction, good concentricity and compliance with tight tolerances make this belt an excellent purchase.

  CAD$ 83.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 7.99 Out of stock

  Reference: 4WX-E2653-00-00

  Brand: Yamaha

  

  Fan Cooling Cover Yamaha (Bws/Zuma 2002-2011)

  Remplacement Fan cooling cover for Yamaha Bws / Zuma 2002-2011

  CAD$ 7.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 11.99 Available in 4-20 days

  Reference: 343.0022

  Brand: Polini

  

  Throttle Cable Adjuster Polini (90 degree)

  Polini 90 degree throttle cable guide for carb caps.

  CAD$ 11.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 59.99 In stock

  Reference: SCT-GB0064/R

  Brand: SKF

  

  High Quality SKF Gearbox Bearing set Bws/Zuma (2002-2011)

  High Quality SKF genuine C3 complete gearbox bearing set. Direct fit on a Bws/Zuma 2002-2011 or most Taiwan made Minarelli horizontal engines. Make sure you grab a replacement gasket before opening the gearbox, theres a good chance the OEM one will no longer be usable.

  CAD$ 59.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 Out of stock

  Reference: MF60.16618

  Brand: Motoforce

  

  Kickstart return spring Minarelli

  Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.

  CAD$ 10.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 19.99 In stock

  Reference: 174.0076

  Brand: Polini

  

  Front Brake Pads Polini Organic (Bws/Zuma – Pgo – Beamer)

  Polini brake pads are high quality top performing brake pads and up there with the best, more so in the Racing Line, braking performance is noticeably improved and come highly recommended. Suitable for use on the road and more suitably on the track.

  CAD$ 19.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 64.99 In stock

  Reference: SCTFR004

  Brand: Scootertuning.ca

  

  Left Side Cover Yamaha Bws/Zuma 02-11 Black

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 64.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 64.99 In stock

  Reference: SCTFR005

  Brand: Scootertuning.ca

  

  Right Side Cover Yamaha Bws/Zuma 02-11 Black

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 64.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: IP32442

  Brand: Scootertuning.ca

  

  Replacement Front Pulley Minarelli

  Variator pulley plate for Minarelli engines wit ha 13mm crankshaft taper. Pulley diameter is 94.3mm.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 29.99 In stock

  Reference: SCT-CABLE

  Brand: Scootertuning.ca

  

  Single Throttle Cable Bws -Zuma 2002-2011

  Throttle control cable, suitable for Yamaha Bws/Zuma 2002-2011 with oversize caburettor. Attention! No throttle stopper included!

  CAD$ 29.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 3.99 Out of stock

  Reference: MF96.90011

  Brand: Motoforce

  

  Exhaust stud Motoforce, M6x1mm

  Exhaust stud M6x1mm, for nearly all engines. Required to screw the exhaust to the cylinder.

  CAD$ 3.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: 203.0098

  Brand: Polini

  

  Air filter Polini Short 90° Black (48mm)

  We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 Out of stock

  Reference: SCT-B1S015/BK

  Brand: Scootertuning.ca

  

  Side Stand Bolt-On Black (Bws/Zuma 2002-2011)

  We offer here 100% bolt on stand for Yamaha Bws/Zuma 2002-2011. This stand directly work without any modifications, no cutting, no welding. You simply install the stand with the ''U'' Bolt supplied and it's ready to use!

  CAD$ 44.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 149.99 In stock

  Reference: 263880

  Brand: Doppler

  

  Primary gear kit Doppler 14/42 Minarelli

  Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Must be combined with a M10x1.00 hex nut.

  CAD$ 149.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: 209.0383

  Brand: Polini

  

  Gasket set Polini Sport / Corsa 70cc (Kymco-Dio)

  Replacement Polini gasket set 70cc [Corsa] - Kymco/Sym upright

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: MF60.16653

  Brand: Motoforce

  

  Kickstart pinion gear Minarelli

  Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: 477477

  Brand: Tun'R

  

  (2X) Indicator Light Tun'r Ruby

  Tun'r indicator light with orange bulb and transparent lenses to add a clean and modern touch to your ride. Quick and easy to install.

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 Out of stock

  Reference: S6-3199900

  Brand: Stage6

  

  Choke lever Stage6 150cm

  Stage6 universal choke. No matter whether you want to convert your electric choke or simply choose a stylish alternative to the original manual choke - this CNC milled Stage6 product is what you need, offering high quality as well as cool looks. There are 2 possible ways of mounting: either you use the adjustable retaining clamp, or you simply insert it...

  CAD$ 42.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: MF96.90019

  Brand: Motoforce

  

  Gearbox, Fan & Waterpump Cover bolt Motoforce M6x25 (Minarelli)

  We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: NK100.21

  Brand: Scootertuning.ca

  

  Exhaust Gasket Naraku 25x33x4mm

  Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. 25X33x4mm.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 Product available with different options

  Reference: SCT-BE0023/CR

  Brand: Ruckhouse

  

  Bar End Mirror Chrome Universal (7/8)

  We can offer here handlebar bar end mirror with stainless steel grab screw for 7/8 standard handlebar. Cannot be used on both side, you have to purchase each side (right and left) serparatly by choosing it in the dropdown menu. Attention, Sold individually!

  CAD$ 21.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 319.99 Available in 4-20 days

  Reference: TUB901

  Brand: Yasuni

  

  Exhaust Yasuni Z Minarelli Horizontal

  The Yasuni Z from the Spanish manufacturer Yasuni is an absolutely high performance exhaust when combined with 50cc and 70cc sport cylinders. Good performance and amazing sound. This exhaust is equipped with a classy Aluminium silencer, but also available with the following silencer : Aluminium Black, Carbon and Carbon Kevlar. You just have to choose the...

  CAD$ 319.99

  More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: MF96.90018

  Brand: Motoforce

  

  Gearbox, Fan & Waterpump Cover bolt Motoforce M6x20 (Minarelli)

  We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 36.99 In stock

  Reference: 467817

  Brand: Tun'R

  

  Air Filter Tun'r Uni Style (28-36mm)

  We offer here Tun'R Double Layer Air Filter 28-35mm with 30deg angle at a great price! This air filter with double layer foam is compatible with all Dellorto carburettors 12 to 21mm. Your carburetor will get more air, dirt and other impurities will be filtered out and your engine will sound more "racing".

  CAD$ 36.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: STR-550.10/

  Brand: Str8

  

  Engine case screws STR8 Minarelli

  STR8 transmission cover retaining bolts for Minarelli engines. The blue and red bolts as well as the chrome-coated ones are made of anodised aluminium and should be used for custom purposes only. The black ones can, however, be safely used to replace the original bolts.

  CAD$ 14.99

  More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: 4WX-E2651-00-00

  Brand: Yamaha

  

  Engine Cooling Cover Yamaha (Bws/Zuma 2002-2011)

  Remplacement Cylinder cooling cover for Yamaha Bws / Zuma 2002-2011

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 61.99 In stock

  Reference: SCTFR026

  Brand: Scootertuning.ca

  

  Front Side Cover Yamaha Bws/Zuma 02-11

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 61.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: 6714039

  Brand: Malossi

  

  Primary gear kit Malossi 13/44 Minarelli

  Malossi S.p.A. is pleased to offer its new series of final transmission gears for scooters and maxi scooters. These new gears were created by exploiting 20-year experience in designing and building gears for competition and road scooters. The new H.t.q. gears were designed and built with straight teeth to minimise losses through friction and stress on the...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare