Top sellers

• 

  CAD$ 8.99 In stock

  Reference: 378175

  Brand: Malossi

  

  Variator sliders set for Malossi Multivar variator

  Replacement parts for Malossi Multivar variator.

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 1.99 In stock

  Reference: 364450

  Brand: Malossi

  

  Piston Pin Circlip Malossi C-Clip 12mm

  High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...

  CAD$ 1.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 27.99 In stock

  Reference: 354501

  Brand: Malossi

  

  Piston ring set Malossi Sport 70cc cast-iron (47x1.5mm) Minarelli / Piaggio

  CAD$ 27.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 6.99 In stock

  Reference: SCT-GA007

  Brand: Scootertuning.ca

  

  Gearbox Cover Gasket Bws/Zuma 50F

  5mm replacement gearbox cover gasket for Minarelli 50F 4 stroke engine.

  CAD$ 6.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 11.99 Product available with different options

  Reference: TH41AOP

  Brand: Scootertuning.ca

  

  Oil Delete Plug (Dio-Elite)

  CAD$ 11.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 54.99 In stock

  Reference: 6117087

  Brand: Malossi

  

  Drive belt Malossi X-Kevlar Minarelli Short

  This Kevlar reinforced drive belt is an absolute must-have for racing and high-end engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Reinforced with Kevlar fibre, this drivebelt can handle the strongest engines. The fact that this belt is a bit broader than the original one results in higher top speed, as the...

  CAD$ 54.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 35.99 In stock

  Reference: S6-28KH-005/ND

  Brand: Stage6

  

  Pilot Slow jets Set Stage6 PWK

  Ideal kit to set up your carburetor. 10 pilot jets in a handy plastic box, which makes it easier to grab the right one. And it's also cheaper than buying the jets individually. A set includes 10 pilot jets. There are different sets for all 21 to 28mm Stage6 PWK carburetors and 28-34mm Koso, each available in two different ranges of sizes.10 pieces, 35,...

  CAD$ 35.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: SCTFR025

  Brand: Scootertuning.ca

  

  Handlebar Rear Cover Yamaha Bws/Zuma 02-11

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 419.99 Available in 4-20 days

  Reference: TUB906

  Brand: Yasuni

  

  Exhaust Yasuni C16 Minarelli Horizontal

  This is the kid brother of the Carrera 20 exhaust, which comes with a slightly smaller expansion chamber and higher resonance length. It is manufactured by the Spanish guys from Yasuni and has many strong points such as a high quality finish and attractive details like a reinforced tailpipe, a silencer that is stabilized via a spring and equipped with an...

  CAD$ 419.99

  More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: MF96.90009

  Brand: Motoforce

  

  Nut Motoforce Clutch (Jaw size) M28x1mm

  Nut M28x1mm, to screw the clutch to the rear pulleys. Fits all Minarelli engines.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 91.99 In stock

  Reference: 6115822

  Brand: Malossi

  

  Drive belt Malossi X-Kevlar Overrange 2013 Minarelli Long

  Special longer version of the X Kevlar belt for the Malossi Overrange 2013 ''la furia rossa'' kit. The ideal drive belt for racing and high end-engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Its Kevlar reinforcement make it perfect for the use with the strongest engines. The fact that this belt is a bit broader...

  CAD$ 91.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.09 CAD$ 22.99 -30% In stock

  Reference: MOT105880

  Brand: Motul

  

  Motul 2T Oil Scooter Expert Technosynthetic Anti Smoke (1L)

  Technosynthese® lubricant for 2-Stroke scooter engines with premix or injector lube system, operating at high rpm. Reinforced with synthetic base stocks for outstanding oil film resistance and anti-wear protection. Minimises smoke and deposits.

  CAD$ 16.09 CAD$ 22.99 -30%

  Add to cart More

  Reduced price!

  In stock

  Add to Compare
• 

  CAD$ 77.99 In stock

  Reference: 249.048

  Brand: Polini

  

  Clutch Polini 3G 107mm Minarelli

  Polini offer here the little brother of the 3G For race Clutch. Clutch engagement can be adjusted by exchanging the supplied springs. For adjustment, you need to replace the clutch springs.

  CAD$ 77.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 169.99 In stock

  Reference: 201.2100

  Brand: Polini

  

  Carburetor Polini CP 21mm (Knob Choke)

  The CP is the first carburetor that has been completely developed by Polini and without a doubt one of best carburetor available. Special attention has been paid to size and weight: the carb is very compact and about 40% lighter as compared to traditional carbs. The compact design makes for a very short intake duct, which features a unique concentric...

  CAD$ 169.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 56.99 Out of stock

  Reference: KW13991

  Brand: Scootertuning.ca

  

  Replacement Starter clutch Minarelli Horizontal (13mm)

  Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke engines with 13mm crank tail shaft. Delivery is as shown. If the starter clutch is damaged, it always makes sense to replace all of the components. In a starter clutch all components contact and are mutually...

  CAD$ 56.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 21.99 Product available with different options

  Reference: 317-623

  Brand: SCOTT

  

  Handlebar grips Scott SX II

  The Grip S II is a dual density grip with a soft density diamond pattern surrounding a rm density core and end cap. The raised diamond texture offers incredible grip while the soft compound helps reduce armand hand fatigue. Included grip donuts help reduce abraison and thunb blisters. This grip is a top choice amonmgst many top racers and weekend warriors...

  CAD$ 21.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: MAL11362

  Brand: Malossi

  

  Intake Adaptor Malossi 23mm (Genuine-PGO-Kymco)

  This mounting kit is required to fit 17.5-21mm Dellorto & 17.5-21 mm Polini CP carburettors with slot connectors to the original inlet manifold. The kit contains: Malossi bigger adaptor, connector rubber and ring clips. The metal connector has an internal diameter of 17.5mm. Dimension rubber : inside diameter: 23mm.

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: MF60.16615

  Brand: Motoforce

  

  Woodruff key Motoforce Minarelli / Piaggio

  We can offer you this woodruff key from Motoforce in OEM quality. Its function is to connect the rotor on the crankshaft, thus ensuring the right ignition timing. This is one of those small fiddly parts that are easily lost; it can also get stuck in the old crankshaft.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 123.99 Out of stock

  Reference: NK100.31

  Brand: Naraku

  

  Cylinder kit Naraku 70cc Minarelli Horizontal 10mm Minarelli Horizontal

  Attention! Cylinder head sold separatly (NK102.83). High-torque 70cc NARAKU cylinder kit. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the lower range. Just above the idling speed comes solid, constant and very strong acceleration. All that, without straining the engine at unnecessarily high engine speeds. The power...

  CAD$ 123.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 24.99 Out of stock

  Reference: NK-BP001

  Brand: Naraku

  

  Front Brake Pads Naraku Bws/Zuma 50F

  Naraku organic lining brake pad with KBA approval in OEM quality

  CAD$ 24.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 107.99 In stock

  Reference: 057115

  Brand: Athena

  

  Primary gear kit Athena 15/50 Minarelli

  Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing.

  CAD$ 107.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 79.99 In stock

  Reference: SCTFR032

  Brand: Scootertuning.ca

  

  Floor cover Yamaha Bws/Zuma 02-11

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 79.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 6.99 In stock

  Reference: SCTFR029

  Brand: Scootertuning.ca

  

  Serial Number Cover Yamaha Bws/Zuma 02-11

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 6.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: 245.012

  Brand: Polini

  

  Clutch Springs set Polini Sport

  Tuned engines are likely to produce maximum power high up in the rev range, the engine will suffer from a loss of power at low revs though, which is typical for such tuned engines. POLINI offers this set of clutch springs of different strengths to bridge the gap in the powerband. Should be ordered if a tuning exhaust is used! Yellow : Strong / Green :...

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: MF96.90013

  Brand: Motoforce

  

  Cylinder studs Motoforce M6x109mm

  These high-quality stud bolts from Motoforce are now available for Minarelli and Piaggio. Perfect if you want to build a new engine or want to replace oxidized stud bolts.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 56.99 In stock

  Reference: 248.040

  Brand: Polini

  

  Drive belt Polini KEVLAR Minarelli Long

  Another contribution to the belt drive market by Polini, Kevlar fibre increases the maximum power this belt can transfer.

  CAD$ 56.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: MF96.90010

  Brand: Motoforce

  

  Cylinder Head nut M6x1mm Motoforce

  Nut M6x1mm for all studs at the cylinder head. Fits all Minarelli vertical engines.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 279.99 In stock

  Reference: 070200/1

  Brand: Athena

  

  Cylinder Kit Athena SPORT (Basic) 70cc 12mm Minarelli Horizontal

  High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of mechanical stresses. This aluminium cylinder is casted in steel...

  CAD$ 279.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 7.99 In stock

  Reference: S410485200013

  Brand: Athena

  

  Air filter insert Athena (Bws/Zuma 2002-2011)

  Athena has designed a complete range of air filters for Off-Road ATV, and scooters that are manufactured by using open cells polyurethane. These high quality air filters guarantee a perfect filtering combined with an excellent air flow in each condition of use. Made in Italy.

  CAD$ 7.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 6.99 In stock

  Reference: VCR-RD13.FUEL/

  Brand: Voca

  

  Fuel hose VOCA 5mm Racing High Quality 1m

  High quality fuel pipe by Voca Racing produced with a high percentage of silicone to ensure a constant quality and avoid dryness.

  CAD$ 6.99

  More

  In stock

  Add to Compare
• 

  CAD$ 159.99 In stock

  Reference: T9931670

  Brand: Top performances

  

  Variator kit Top Performances TPR Minarelli Long

  The TRP GP variator kit from Top Performances. A newly developed variator from milled high-quality aluminium with improved shifting characteristics and easier adjustment. Included in the delivery are: variator, outer front pulley, drive belt, set of weights for adjustment, and small parts. Weights: 16x13mm; 7g

  CAD$ 159.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: MF96.90060

  Brand: Motoforce

  

  Fairing Screws Motoforce Universal

  This 50-part fairing screw kit includes M4 and M5 sheet-metal screws for all common scooter fairing parts. 20x M5x20mm / 10x M5x10mm / 10x M4x20mm / 10x M4x16mm

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 23.99 In stock

  Reference: SCTFR024

  Brand: Scootertuning.ca

  

  Tail Cover Yamaha Bws/Zuma 02-11 White

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 23.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 64.99 In stock

  Reference: SCTFR031

  Brand: Scootertuning.ca

  

  Underfloor cover Yamaha Bws/Zuma 02-11

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 64.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 13.99 Out of stock

  Reference: SCT-FS0M5

  Brand: Scootertuning.ca

  

  Fairing Screws Stainless M5

  This universal fairing screw kit includes, in addition to M5x15 sheet-metal screws (20 pcs.), also the matching screw clips; this allows you to get new clips if the old ones have gone walkabout.

  CAD$ 13.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 38.99 In stock

  Reference: NK100.37

  Brand: Naraku

  

  Crankshaft Bearing Naraku HQ Minarelli

  Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings with C3 bearing clearance from NTN or KOYO used. Please note! When changing the crank, always use new bearings and seals.

  CAD$ 38.99

  Add to cart More

  In stock

  Add to Compare