No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Replacement OEM Honda Parts.
Reference: DIO-gear1642
Brand: Taida
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones.
Reference: S6-0221
Brand: Stage6
The fully synthetic oil with modern high-performance additives was developed for extreme conditions such as racing and accordingly offers high lubrication properties to reduce friction and consequently improve output and performance. It is a high performance lubricant with shear stable, antioxidant, anti-corrosion and anti-wear and anti-foaming...
Reference: BT24486
Brand: Scootertuning.ca
Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting issues can be traced to the kick-start. 2 different versions with either 7 or 8 teeth are currently used. This version is the 8-tooth version. Please check product image and compare to original part.
Reference: BT7001-16
Brand: Scootertuning.ca
Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engines are factory-fitted with 2 different versions of crank. The only difference is the oil pump drive cog on the right-hand side. The old version, installed in almost all vehicles, has a 16 tooth cog. The new...
Reference: PM01600
Brand: Scootertuning.ca
Complete Fairing set for PGO PMX & Genuine rattler and roughouse scooter. Please check on the picture to see what parts are include.
Reference: GY14955
Brand: Scootertuning.ca
Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releases properly. In the worst case scenario, this can be catastrophic for the motor. As many parts of the starter mechanism are inter-connected, they are all subject to a fair bit of wear. Replacing the starter...
Reference: TRS-AFC99/RD
Brand: TRS
Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly bolts, and give the bike a really awesome look! Caps come raw, anodized red, anodized black or anodized black...
Reference: TRS-CVTCVS/BK
Brand: TRS
The TRS VIP Series open CVT drive cover aka anklebiter for the honda get motor. Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released. No problems running in rain. This Drive cover is CNC Machined from a solid 6061 Aircraft-Grade Billet Aluminum with 7 Stainless...
Reference: RPR-STKGC/AB
Brand: rPRO
Step-Tone series is our latest brainchild in our line of billet parts. Offering assorted anodized colors with two-tone combinations, gives the end user a more creative color palette to work with, thus achieving the best color scheme possibilities for their builds.
Reference: TRS-KIC/AL
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: TRS-RUCCVTC/MA
Brand: TRS
The GET Open CVT Drive Cover aka AnkleBiter. Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released. No problems running in rain. This Drive cover is CNC Machined from a solid 6061 Aircraft-Grade Billet Aluminum with 7 Stainless bolts and Washers included. This item...
Reference: S6-P003
Brand: Stage6
Complete engine package for Yamaha Bws 2002-2011. Package include Cylinder kit Stage6 Sport Pro MKII 70cc 10mm, Variator stage6 sport pro, Exhaust Stage6 pro replica, Main jet set Stage6 80-102 6mm, Spark plug BR9HS, Stage6 16x13 roller 5g and Stage6 medium torque spring.
Reference: SCTFR035
Brand: Scootertuning.ca
We can offer here Quality fairing parts for Yamaha Bws/Zuma 2002-2011.
Reference: NK900.76
Brand: Naraku
Naraku Sports Contra Spring V.2 +2000rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually.Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: 27241
Brand: Scootertuning.ca
Brake calliper for front wheel disc brakes on Gilera Runner, MBK Nitro, as well as Yamaha Aerox scooters. Check product image, as the pictured calliper is the one supplied. Suitable for AJP braking systems.
Reference: 241.750
Brand: Polini
This variator works 19x15,5mm in the dimensions of 6 variator rollers. There are 2 sets of variator rollers included, so can optionally be equipped with 3.8 or 4.3 g. The kit also includes a new back-pressure spring and an Evo-Slider to eliminate the friction between the counter-pressure spring and transducer disk. Polini called the Hi-Speed evolution...
Reference: P10166
Brand: Replay
Reference: 1200-1191
Brand: NCY
High quality roller weights from the fine folks at NCY. These are constructed with a low-friction polymer to ensure a long life and seamless operation. For those unfamiliar with roller weights, they are an important tuning device and have a significant impact on your scooter's performance! They should be checked/changed every 1000 miles (per maintenance...
Reference: 343.0033
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: STR-340.10
Brand: Stage6
Bellmouths are more and more common at drag races - and there are good reasons for this trend: they optimize the flow of drawn-in air to the carburettor. With this airflow optimization, the bellmouth has benefits throughout the rev range and therefore increases performance. Can be used either completely open for maximum air passage or combined with the...
Reference: 3819674
Brand: Malossi
Replacement Cylinder head Malossi 70cc Minarelli Horizontal
Reference: BM02109
Brand: Scootertuning.ca
Reference: SCT-F011/12
Brand: Scootertuning.ca
Replacement 12x4'' front wheel for most of GY6 150cc scooter. Made for 12mm wheel axle. Disc Brake Pattern : 3x75.
Reference: MF18.20007
Brand: Motoforce
We can offer you these replacement air filter inserts from Motoforce for your original air box. Dirty air filters reduce the engine's efficiency and increase the fuel consumption, which is why you should change them every few thousand kilometres.
Reference: MOT112952
Brand: Motul
Hydraulic Fluid for any telescopic fork. 4 Viscosities: Light-Medium-Medium/Heavy-Heavy. Contains an Anti-Friction additive developed by Motul, making easier sliding, avoiding drag in the fork • Stable absorbing in an extended range of temperature • Protection of seals: excellent oil/ elastomer compatibility. Anti wear, anti corrosion, anti foaming
Reference: NK900.65
Brand: Naraku
Naraku Sports Contra Spring V.2 +2000RPM. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: NK900.63
Brand: Naraku
Naraku Sports Contra Spring V.2 +1000rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: M4T61-N
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal...
Reference: 1100-1248.5
Brand: NCY
Want a real screamer? Then this 88cc big bore kit for you, although its not a bolt on item for most QMB 139 bikes. Most of the time, engine cases must be cut. Order part number 1400-1001, Engine Bore Tool if there is no access to a machine shop. Its also recommended to get part number 1100-1239, 50mm big valve head as well, as some stock heads will not...
Reference: GY14192
Brand: Scootertuning.ca
Valve cover for cylinder heads without SLS. For all GY6 125/150cc 152/157QMI engines.
Reference: TFC-013
Brand: TFC
Reference: 1000-1355.5
Brand: NCY
NCY Floating brake disc for Honda Ruckus / Dio & Elite. Attention, to use this disc you will need the NCY caliper mount and the NCY / Stage6 / Polini Standard 2-piston brake caliper.
Reference: FLP-024
Brand: FLP
Reference: TRS-FFCG/AL
Brand: TRS
Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive and fit with a perfect fit. It also helps clean up the front end by closing up one of the noticeable gaps in the...
Reference: DIO-01056
Brand: Taida
Taida Honda Dio 56mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with dio taida stroker crankshaft 52.6mm (130cc). Attention! Boring and machining required.