Top sellers

• 

  CAD$ 51.99 In stock

  Reference: GY6-CGA

  Brand: Taida

  

  Chain Guide Taida Type A for GY6 125-232cc

  Taida Chain Guide available in 2 model : A and B

  CAD$ 51.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 199.99 Out of stock

  Reference: NK700.13

  Brand: Naraku

  

  Carburetor Naraku 30mm Racing (diaphragm operated) for GY6 125-180cc

  Naraku 30mm racing carb for 125-300cc engines. Racing only! 35Mm connection, 50mm on the filter side. Throttle cable layout on the side.Build height corresponds with the original. Please check that this carb is suitable before ordering. Different air filter required, different inlet manifold, or adapted original.

  CAD$ 199.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 81.99 In stock

  Reference: FLP-018

  Brand: FLP

  

  Keyless Gas Cap FLP BBS CNC Aluminium Honda Ruckus

  Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.

  CAD$ 81.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 156.99 In stock

  Reference: TRS-RSB5220/MI

  Brand: TRS

  

  Rear Sets Backs Peg Bracket TRS Milled Honda Ruckus

  The TRS rearset backs are a great addition to your ruckus for that sportbike feel. Attaches to side of frame using stock holes and provided stainless hardware. Raw Billet Aluminum 6061 1/2" plate SUPER THICK AND STRONG; Mounts to your stock engine mount location; Pegs NOT included, however any aftermarket pegs will work! Made in USA.

  CAD$ 156.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 40.99 Out of stock

  Reference: TRS-AFB/BK

  Brand: TRS

  

  Anti-Flex Bushing TRS Black Honda Ruckus

  The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,” is a problem created when your Ruckus has a load or the ride height has been adjusted. The engine/rear axle is mounted with 3 points, and since these 3 mounting points are unevenly distributed, the lean or slant...

  CAD$ 40.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: DIO-studs-w140

  Brand: Taida

  

  Extended Cylinder Studs Taida 140mm (AF16-AF18E)

  Taida Extended cylinder for Honda Dio especially made for the Taida 97cc & V2 liquid cylinder kit. Include 4 studs and nuts.

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: DIO-studs-130

  Brand: Taida

  

  Extended Cylinder Studs Taida M6 130mm (AF16-AF18E)

  Taida Extended cylinder for Honda Dio especially made for the Taida V2 liquid cylinder kit. Include 4 studs and nuts.

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 7.99 Out of stock

  Reference: IP14666

  Brand: Scootertuning.ca

  

  Camshaft radial ball bearing 6201 C3 for Piaggio 4-stroke

  Replacement camshaft bearing as replacement for the original when changing the camshaft. 12X32x10

  CAD$ 7.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 70.99 In stock

  Reference: MF19.19588

  Brand: Motoforce

  

  Cylinder Motoforce Eco 50cc Cpi-Vento-Keeway (12mm)

  If you’re looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though. Comes without cylinder head! The original head can be kept.

  CAD$ 70.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 114.99 In stock

  Reference: 215.0437

  Brand: Polini

  

  Intake Polini Evolution 35mm Piaggio

  Polini intake manifold including CNC-machined aluminum spacer. Suitable for scooter models with Piaggio engine with 24-30mm PWK, PHBH or VHST carburetor. Carburetor connection: 35mm. Intake: 30mm

  CAD$ 114.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 96.99 In stock

  Reference: 2013802

  Brand: Malossi

  

  Intake Manifold Malossi Viton 35mm Piaggio

   Malossi has a two-part intake manifold on offer to match the bulky Dellorto VHST carburators. This manifold consists of a base plate and a flexible, angled rubber sleeve, which will be clamped between base plate and engine intake. The inlet manifold has an internal diameter of 30mm and a connection diameter of 35mm.

  CAD$ 96.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: P11347

  Brand: Replay

  

  (2X) Indicators Replay Mini Arrow Orange / Chrome

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 25.99 In stock

  Reference: S6-5214001

  Brand: Stage6

  

  Torque spring Stage6 Soft Piaggio-GY6

  These black-coated torque springs from Stage6 are available in different strengths. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can't feel any acceleration. The strength of a torque spring is marked on the spring itself so you won't have any...

  CAD$ 25.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 63.99 In stock

  Reference: S6-5114000

  Brand: Stage6

  

  Front Pulley Stage6 CNC Piaggio

  Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...

  CAD$ 63.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: S6-4030ET02

  Brand: Stage6

  

  Temperature sensor Piaggio L/C Black Connector

  In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 Out of stock

  Reference: RH-160013

  Brand: Ruckhouse

  

  Handlebar Ruckhouse AL6061 760mm

  Ruckhouse AL6061 31.8mm handlebar for Honda Ruckus. Attention! Ruckhouse Cold Forged Stem required. This handlebar doesn't work with regular stem like NCY. Width: 740mm - Clamp size: 31.8mm - Rise: 30mm - Geometry: 5° upsweep, 7° backsweep - Weight: 330g - Material: 7075-T6 aluminum

  CAD$ 34.99

  More

  Out of stock

  Add to Compare
• 

  CAD$ 209.99 In stock

  Reference: 171.0672

  Brand: Polini

  

  Replacement Rotor Polini PVL Minarelli

  Replacement Rotor for Polini PVL minarelli ignition.

  CAD$ 209.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 26.99 In stock

  Reference: 1200-1191

  Brand: NCY

  

  Variator Roller Weights NCY 20x15mm

  High quality roller weights from the fine folks at NCY. These are constructed with a low-friction polymer to ensure a long life and seamless operation. For those unfamiliar with roller weights, they are an important tuning device and have a significant impact on your scooter's performance! They should be checked/changed every 1000 miles (per maintenance...

  CAD$ 26.99

  More

  In stock

  Add to Compare
• 

  CAD$ 71.99 In stock

  Reference: 3819674

  Brand: Malossi

  

  Cylinder head Malossi 70cc Minarelli Horizontal

  Replacement Cylinder head Malossi 70cc Minarelli Horizontal

  CAD$ 71.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 639.99 In stock

  Reference: TRT-10000

  Brand: 2Fast

  

  Exhaust System 2Fast 100cc Minarelli Horizontal

  The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System. Available in 70, 86, 90, 94 and 100cc Minarelli Horizontal.

  CAD$ 639.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 89.99 Out of stock

  Reference: 5PJ-H2910-03-00

  Brand: Yamaha

  

  Left Handlebar Switch Complete (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 89.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 31.99 In stock

  Reference: 1CD-F1741-00-P2

  Brand: Yamaha

  

  Tail Cover White Metallic (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 31.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 102.99 In stock

  Reference: 8360A-GS7-000/BL

  Brand: Scootertuning.ca

  

  Left Side Cover Honda Elite Blue

  CAD$ 102.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 102.99 In stock

  Reference: 8350A-GS7-000/BL

  Brand: Scootertuning.ca

  

  Right Side Cover Honda Elite Blue

  CAD$ 102.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 749.99 Out of stock

  Reference: RH-050

  Brand: Ruckhouse

  

  Front & Rear Custom wheels Hub Kit (4x110) Honda Grom 2022+

  This is the complete hub kit allowing to use 12x4 & 12x6 4x110 custom wheels on Honda Grom including all the required parts.

  CAD$ 749.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 52.99 In stock

  Reference: 248.041

  Brand: Polini

  

  Drive Belt Polini Kevlar (Minarelli 100cc)

  Kevlar Maxi Belt by Polini. The most durable v-belt Polini offers has additional Kevlar inlays that, together with the interwoven aramid fibres, makes this belt extremely resistant to tearing. This is not Polini’s top choice for the race track for nothing. The grip is so good that, despite the high Kevlar content, the belt slip is heavily reduced when...

  CAD$ 52.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 29.99 In stock

  Reference: VC19985

  Brand: Bando

  

  Drive Belt Bando V/S (Minarelli 100cc)

  High-quality Bando V/S belt, durable and well-engineered. Size: 757-17.3-28 Suitable for all vehicles with 100cc 2-stroke Minarelli engines. 8510604 / R16140641A0 / 4871702091 / 4VP1764100

  CAD$ 29.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: BT14430

  Brand: Scootertuning.ca

  

  Kickstart Castle Washer for GY6 50cc 139QMB/QMA

  Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing kickstarter issues.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 3.99 In stock

  Reference: BT12003

  Brand: Scootertuning.ca

  

  Kickstart Spring Plastic ring for GY6 50cc 139QMB/QMA

  This plastic spacer prevents the kickstarter spring from rubbing against the crankcase cover, making it easier to turn over.

  CAD$ 3.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 49.99 In stock

  Reference: GY15430

  Brand: Scootertuning.ca

  

  Engine screw set for GY6 125-150cc

  Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.

  CAD$ 49.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 149.99 In stock

  Reference: BM0446002

  Brand: Stylepro

  

  Ignition Lock Switch Black (Bigmax-PMX-Rattler-Roughouse)

  Replacement Ignition lock switch for PGO & Genuine scooters. Please compare with the picture to make sure it's the right lock switch.

  CAD$ 149.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 167.99 Out of stock

  Reference: 1000-1324.8

  Brand: NCY

  

  Front Rim NCY Honda Ruckus Black

  Front 10'' wheel rim from the NCY front end fork & disc brake kit for Ruckus. Attention! Cannot be used with the OEM drum brake kit, you have to convert your ruckus to front disc brake with new fork, caliper and hydrolic brake master cylinder to use this wheel.

  CAD$ 167.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 19.99 In stock

  Reference: IP31980

  Brand: Scootertuning.ca

  

  Carburetor to manifold connector rubber (20mm)

  Rubber adaptor for connecting the carburettor and intake manifold. Jubilee clips included. Inside diameter: 20mm

  CAD$ 19.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: BT13841

  Brand: Scootertuning.ca

  

  Engine gasket set (743mm) GY6 Short Case 125-150cc

  Complete engine gasket set for 125cc GY6 engines with 743mm v-belts (152QMI engines). Set contains all the servicing-relevant gaskets: a cheaper option than buying them all separately. Crank oil seals not included. We offer these as part of a crank seal set. This set can also be used on 150cc variants, but this requires you to order the 150cc head gasket;...

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 63.99 In stock

  Reference: GY14682

  Brand: Scootertuning.ca

  

  Electric starter motor for GY6 125-150cc

  Starter motor for GY6 125/150cc, supplied with connector cable.

  CAD$ 63.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 54.99 In stock

  Reference: FLP-012

  Brand: FLP

  

  Radiator Cap FLP Crown CNC Aluminium Honda Ruckus

  Give your get some flare with the new ROYAL RAD CAP. Hides away the ugly stock radiator cap. 2 set screws secure the cap onto the your old radiator cap. Work for stretched ruckus only. The perfect match for our ROYAL gas cap. Made in USA.

  CAD$ 54.99

  Add to cart More

  In stock

  Add to Compare