No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
This Low Down Shock is constructed of an anodized black billet body,...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
With the RS II, Tecnigas offers an...
Reference: 1400-1001.1
Brand: NCY
Engine bore tool by NCY. A must for using most large bore cylinder kits. IMPROVED DESIGN!! Now works with multiple engine designs!!! Please use a drill press or hand drill with a clutch in it. GY6 MODELS: BORE UP TO 67MM. OTHER MODELS UP TO 72MM.
Reference: GY14193
Brand: Scootertuning.ca
Complete rocker mechanism including all individual parts ready fitted. For all GY6 125/150cc 152/157QMI engines.
Reference: 1300-1069.10
Brand: NCY
NCY intake manifolds offer a smooth bore and larger inlet diameter over stock. Combined, these two assets allow more air and more fuel into your cylinder, giving you more power. Intake manifold upgrades are a must for larger carburetors. It doesn't make sense to install a large carburetor only to have its flow restricted by the manifold. Larger manifolds...
Reference: RH-083
Brand: Ruckhouse
Reference: TRT-EX100RC1
Brand: 2Fast
2Fast 100cc exhaust made for the same brand 100cc cylinder kit for Malossi RC1 engine.
Reference: RH-084
Brand: Ruckhouse
Reference: TRS-AFB/AL
Brand: TRS
The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,” is a problem created when your Ruckus has a load or the ride height has been adjusted. The engine/rear axle is mounted with 3 points, and since these 3 mounting points are unevenly distributed, the lean or slant...
Reference: DIO-01054-b
Brand: Taida
Taida Honda Dio 54mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with dio taida stroker crankshaft 52.6mm (120cc). Attention! Boring and machining required.
Reference: S6-2014012P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: S6-2014011P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: P-PL011/B
Brand: Polini
Complete engine package for Minarelli Vertical Engine. Package include Polini Sport 70cc cylinder kit, Variator Polini Hi-Speed, Exhaust Yasuni R, Main jet set 80-102 6mm, Spark plug BR9ES, Polini 16x13 6.9g roller and Polini soft torque spring.
Reference: SCT-1261272
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.
Reference: 075600/1
Brand: Athena
Attention! : Crankshaft Athena Racing 80cc 43mm stroke required! High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: MVT-PLA06
Brand: MVT
Replacement Ignition for MVT Ignition. Work with all Premium / Digital Direct ignition for Minarelli engine.
Reference: 246.032
Brand: Polini
Twin cooling of the transmission group with the Air Speed Drive developed by Polini. By using the Air Speed Drive you improve decisively the aeration inside the crankcase and consequently it increases both the engine performance for long distances covered and the belt life. The Polini Speed Drive pulley for Piaggio and Minarelli include the Air Speed...
Reference: 5PJ-F612N-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F834V-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 90208-10012-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 3113570
Brand: Malossi
Malossi Sport 70 strong torque cast iron cylinder kit with robust piston and 2 rings. Easy to tune and original carb is retained. Supplied with all necessary mounting parts, instructions, gaskets etc. Delivery includes cylinder head.
Reference: DIO-gear1839
Brand: Taida
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones.
Reference: DIO-060-CH56
Brand: Taida
Taida V2 Liquid Cooled Honda Dio 56mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with dio taida stroker crankshaft 52.6mm (130cc). Attention! Boring and machining required.
Reference: BT12281
Brand: Scootertuning.ca
This bearing set contains all the relevant bearings found within the engine. A complete kit, at a low price. Crank main bearings not included. Not available as single items, owing to the huge risk on the timing chain sit of the crank when installing. Where new main bearings are required, we recommend buying a new crank. The bearings come pre-installed and...
Reference: BT12018
Brand: Scootertuning.ca
Front outer v-belt pulley. Suitable for GY6 139QMB/QMA engines, Kymco 4-stroke engines and Kymco models with horizontal cylinders. Outside diameter: 114mm. Inside diameter: 14mm
Reference: BT13863
Brand: Scootertuning.ca
Original valve cover for Chinese-built GY6 4-stroke 139QMB/QMA engines. The cover is dispatched without an SLS connection [secondary air system]. This means it can be used as a replacement for defective original items, or to blank-off the SLS. This makes the engine quieter and helps it perform better. When installing, you need only change over the...
Reference: 1000-1323.1
Brand: NCY
Rear 10'' wheel rim for Honda scooters. This is the matching pair to our NCY Front End Kits for Honda Ruckus, and it has the correct hub for your stock drum brake on the rear wheel. This rear rim from NCY completes the total custom look of your disc-brake Ruckus.
Reference: GY6-PM003
Brand: Taida
Upgraded Stator Motor from Taida directly made to work with their famous 232cc.
Reference: GY14873
Brand: Scootertuning.ca
Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-stroke scooter GY6 125-180cc engines. A petrol tap failure can often lead to starting difficulties and cut-outs whilst riding. When the membrane is stuck, either no, or not enough, fuel passes through. To remedy...
Reference: TRS-RCVL32/AL
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise...
Reference: MF19.14047
Brand: Motoforce
If you’re looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.
Reference: 3413581.B0
Brand: Malossi
Replacement Piston for Malossi I-Tech 70cc 4 stroke cylinder kit.