No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement Polini intake for Yamaha zuma 2002-2011 / Minarelli...
The MVT Premium ignition may well be...
Reference: RH-179
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: DIO90-030200
Brand: Taida
Taida High Quality stroker crankshaft for AF16 Honda Dio. This stroker crankshaft allow to go up to 100cc with Taida 50-56mm Cylinder kit. Attention! Boring required.
Reference: DIO90-030
Brand: Taida
Taida High Quality stroker crankshaft for AF16 Honda Dio. We recommend this crankshaft with the 50mm bore Taida cylinder kit for a 97cc engine. Attention! Boring required.
Reference: DC32266
Brand: Dayco
ramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: 353-0528
Brand: Maxima
SPEED WAX is a specialized all-in-one detailer that conditions, shines and protects painted surfaces, chrome, anodizing, windscreens and plastic. Advanced formula blends conditioners with color enhancers to produce a brilliant shine. Designed to minimize effort and maximize shine and is the quickest way to detail your ride. Soothing wax sets up quickly...
Reference: BT10004
Brand: Scootertuning.ca
Fan Wheel for air cooling. This item sits on the alternator rotor.
Reference: 1200-1270
Brand: NCY
NCY QMB139 upgear kit for your 50cc 4-strokes is finally here! This kit is made specifically for larger big bored engines and increases your gear ratio by 26%. This will allow you to maximize your big bore kit by increased top speed and a more usable rev range. You won't see much if any improved performance if you install these on a stock top end. For...
Reference: NK100.71
Brand: Naraku
NARAKU performance quality piston set. Suitable for all GY6 50cc cylinders [39mm bore]. The NARAKU piston has a molybdenum coating to reduce wear and shorten the running-in period. This piston has been included in all 50cc NARAKU cylinder sets since 2009, and can be easily used as a replacement in Chinese original cylinders. The CNC-machined grooves in...
Reference: BT12277
Brand: Scootertuning.ca
Complete cylinder head for 50cc 139QMB / QMA engines. Unlike many other available cylinder heads, this is a complete head. That means: valves, valve springs, valve shaft seals etc. This head is ready to install, with no need for grinding valves or fumbling with springs, or specialist tools. Dispatched without SLS. This can be blanked off, which leads to...
Reference: NK100.25
Brand: Naraku
With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. The piston has 2 additional CNC-machined oil grooves in the piston skirt, which collects engine oil to lubricate the cylinder bore and improve characteristics in extreme circumstances. The molybdenum coating aids the crucial running-in period. 2 oil recesses and a...
Reference: HL-002
Brand: Hotlap
All pipes are handmade in Japan by HotLap. The headers and exhaust canisters are built specifically for the Honda Ruckus and built from scratch. They are not reworked headers/pipes like some of the competitors’ options. Very clean with beautiful welds; everything is bent to perfection (no pie cuts to go cracking on you!). Also note every pipe comes with a...
Reference: NK901.24
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...
Reference: GY6-gas61-54
Brand: Taida
Taida Gasket set for 170cc cylinder kit (61mm)
Reference: GY6-studs-218/225-4V
Brand: Taida
Taida Extended cylinder studs (218/225). Set of 4 studs.
Reference: GY6-02054-30.5/26.5
Brand: Taida
2V Performance Taida head with larger 30.5/26.5 valves and improved oversize intake / exhaust port. This cylinder head fits the Taida cylinder kit [150-205cc] for GY6 125/150cc engines (scooters, quads and buggies) To increase performance we suggest a performance camshaft. This cylinder head is made for engine with 54mm spacing (standard GY6 engine)
Reference: 5215401
Brand: Malossi
The new Malossi clutch kit was born from the experience gained in the TMax Trophy. In fact this new range of clutch discs has been developed directly on the race track and it is the outcome of a long-standing racing experience. It perfectly suits the features of your scooter, thus providing maximum efficiency and optimized performance! The kit includes...
Reference: SW-HPE28
Brand: Sunworld
Sunworld PE carburettor is a very high precision carburettor. They have been used for several years in the race and have been proven. A variety of jets for this carb are of course also available. The carb is equipped with a vacuum (supplied with cap if you don't us it), as well with a manual choke and aluminum made bowl. The outside measurements and the...
Reference: IP15427
Brand: Scootertuning.ca
Oil filler plug for Kymco, GY6 50/125/150cc – Silver
Reference: RH-190
Brand: Ruckhouse
Looking for a stylish way to cover the front of your battery box on your Honda Ruckus now that you got rid of the stock headlights? Check this out! Fully CNC Machined Billet Aluminum, designed to make the front of the battery box stand out, and look like it was meant to be without headlights! Comes in Raw or Gloss Black Powder Coated. Stainless Hardware...
Reference: 0400-1010.10
Brand: NCY
Another way to keep your Honda Ruckus looking cleaner than the next. With this white luggage cover, you can keep the internal wiring covered.
Reference: 140.0183/R
Brand: Polini
The Corsa is a Polini Powerfull Mid-Race 70cc cylinder improved from the Polini Sport 70cc cylinder. Extreme port timing, polished exhaust port and increased primary compression result signifiant power increase compared to standard 70cc cylinders with very good reliability. The piston is equipped with a chrome and a grey cast iron piston ring. To reach...
Reference: NK101.24
Brand: Naraku
This piston ring set can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.
Reference: M4T082-H2
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks and outstanding value for money. The silencer is equipped with a...
Reference: S41PLAT014
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: 5312582
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Reference: NK900.27
Brand: Naraku
We can offer you these standard replacement variators from Naraku at a good price/performance ratio. Included is a set of roller weights but you will have to go on using the original vario bushing.
Reference: S6-7419502
Brand: Stage6
The successor of the popular Stage6 70cc Racing cylinder is called Stage6 Racing MKII 70cc. It has been completely revised and has 1hp more out of the box. Re-designed aluminium cylinder with high-strength hardchrome coating. The former flat piston has been abandoned in favour of an R/T replica with 0.8mm ring and domed crown. The thermal stability has...
Reference: 9914270
Brand: Top performances
Reference: 254.0124
Brand: Polini
This is set of gasket for stage6 cylinder with different size for the base (0.05; 0.10; 0.15; 0.20mm)
Reference: 249.011
Brand: Polini
Polini Maxi Speed clutch for GY6, Kymco and Honda 4-stroke maxi scooters. This clutch features great design together with lightweight clutch blocks and reinforced friction plates. Altering the speed at which the clutch engages means the engine can be made to rev higher before the power comes in. This means greater drive, better performance on hills,...
Reference: NK900.74
Brand: Naraku
Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value for money.
Reference: NK900.56
Brand: Naraku
Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower operating temperature and great grip. No delay in the heavily loaded areas. Low weight means better acceleration. Great value for money in the high-end sector.
Reference: 31601E
Brand: Giannelli
Reverse exhausts have been developed by Giannelli R&D to offer a top-level system. The muffler is manually welded and the inner cone-shaped structure provides performance increase at higher range while keeping noise levels within European standards. Transparent paint and reversed kevlar silencer enlight the race spirit of Reverse exhausts. Depending...
Reference: 140.0181/R
Brand: Polini
The Corsa is a Polini Powerfull Mid-Race 70cc cylinder improved from the Polini Sport 70cc cylinder. Extreme port timing, polished exhaust port and increased primary compression result signifiant power increase compared to standard 70cc cylinders with very good reliability. The piston is equipped with a chrome and a grey cast iron piston ring. To reach...
Reference: VC18508
Brand: Scootertuning.ca
Complete igntion lock set for CPI GTR. Excellent quality and price making this a perfect choice from the usually expensive OEM parts. This lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.