No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
(10mm Gudgeon pin) The cylinder kit...
Reference: 060938411
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segements. The mounting of the silencer was changed and it now comes with a black rear silencer.
Reference: S6-4037ET04
Brand: Stage6
Extension cable for the sensor of the Stage6 exhaust gas temperature measuring device (EGT). The length of the extension cable is 120cm.
Reference: WB-4913
Brand: Buzzetti
Damaged screw heads can cause a lot of grief. This bit set lets you remove the old screw applying a left-hand thread, without damaging the thread. 3-12mm
Reference: MF99.00119
Brand: Motoforce
Tearproof, very adhesive tape. Ideal for all kinds of areas; an item that no tool box should be without. 50mm wide.
Reference: S6-0892
Brand: Stage6
Stage6 has adapted to the current situation and now introduce their Face / Community Masks Stage6 & Stage6 R/T polyester. For all health-conscious Stage6 fans. The 2021 season is just around the corner, and even though scooter races, drag race competitions and other events can probably take place again, strict health regulations will probably still apply....
Reference: MF96.90016
Brand: Motoforce
We can offer you inexpensive replacement clips for your fairing from Motoforce. (10pcs.)
Reference: MF96.90015
Brand: Motoforce
This universal fairing screw kit includes, in addition to M4x10 sheet-metal screws, also the matching screw clips; this allows you to get new clips if the old ones have gone walkabout.
Reference: MF96.90039
Brand: Motoforce
This universal fairing screw kit includes, in addition to M5x15 sheet-metal screws (20 pcs.), also the matching screw clips; this allows you to get new clips if the old ones have gone walkabout.
Reference: MF96.90060
Brand: Motoforce
This 50-part fairing screw kit includes M4 and M5 sheet-metal screws for all common scooter fairing parts. 20x M5x20mm / 10x M5x10mm / 10x M4x20mm / 10x M4x16mm
Reference: MF99.00803
Brand: Motoforce
Feeler gauge from Motoforce to measure valve clearance in 4-stroke engines. Consisting of 20 blades from 0.05 to 1.00mm.
Reference: MF99.00072
Brand: Motoforce
Universal flywheel / internal rotor puller for the most common ignitions such as Italkit, Polini, Malossi, MVT, PVL, and HPI. The simple 2-bolt system makes it quite easy to get the rotor off the crankshaft without any damage. Furthermore, this can be used as flywheel puller for some models.
Reference: S6-4516604
Brand: Stage6
This flywheel disc is available as an additional part for the Stage6 R/T internal rotor ignition. Using this part results in the engine revving up more slowly, but also yields a much smoother response, which is important especially in circuit racing. Depending on the set-up, it can also increase revs! Due to manufacturing tolerances, shimming may be...
Reference: WB-5376
Brand: Buzzetti
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when replacing the crankshaft or changing bearings. The puller will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: MF99.00059
Brand: Motoforce
This is what you need to get the flywheel of the ignition off. Unfortunately Buzzetti do not list their pullers with the models they will fit. The list we give is based on our experience. Unfortunately this experience also teaches that one cannot always be sure which extractor works on which flywheel. The best idea certainly is to measure your flywheel's...
Reference: MF99.00060
Brand: Motoforce
This is what you need to get the flywheel of the ignition off. Unfortunately Buzzetti do not list their pullers with the models they will fit. The list we give is based on our experience. Unfortunately this experience also teaches that one cannot always be sure which extractor works on which flywheel. The best idea certainly is to measure your flywheel's...
Reference: MF99.00074
Brand: Motoforce
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when replacing the crankshaft or changing bearings. The puller will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: STR-522.24/
Brand: Str8
These spoilers from Str8 are available in many great colours and can simply be bolted onto the fan covers. Aside from the obvious styling effect, this contributes to better airflow and hence better cooling. Attention! This is a universal part and not all scooter have same fan cover, it's possible that you have to modify your fan cover in order to install...
Reference: S6-4514002
Brand: Stage6
This flywheel disc is available as an additional part for the Stage6 R/T internal rotor ignition. Using this part results in the engine revving up more slowly, but also yields a much smoother response, which is important especially in circuit racing. Depending on the set-up, it can also increase revs! Due to manufacturing tolerances, shimming may be...
Reference: S6-1450502/BK
Brand: Stage6
stage6 R/T proudly presents the MK2 version of their racing fork for Yamaha Aerox scooters. The Stage6 R/T Racing Fork MK 2 sets new standards in terms of performance, looks and customization options for Yamaha Aerox / MBK Nitro riders. Building on the success of the MK1 version, Stage6 improved performance and design to develop an even more powerful fork...
Reference: MF93.001
Brand: Motoforce
Budget fork for CPI Hussar and Popcorn. Tube diameter is 30mm, spring rate is slightly higher than the one of the original fork, hence these forks are less likely to bottom out than the standard one. In addition to that, damping of fork may be adjusted by using different grades of fork oil.
Reference: MF45.00040
Brand: Motoforce
Attention! Only for Stage6 and other brand fork or Bws/Zuma 1996-2001 OEM Fork, please contact us for more info. Inexpensive replacement brake calipers from Motoforce. The 2-piston unit comes with organic brake pads. Please note that when replacing the caliper, you’ll need to vent the braking system. If you do this for the first time, please ask for help...
Reference: MF40.00190
Brand: Motoforce
Good quality replacement brake pads from Motoforce.
Reference: MF40.00301
Brand: Motoforce
Sintered brake pads from Motoforce Racing for sporty riding. Ideal for maintaining high braking performance. Sintered metal offers superior thermal properties, minimizing the heat at the brake piston and thus the heat of the brake fluid. Like other pads, these also need to be run in to achieve maximum braking power. For daily use, we recommend organic or...
Reference: MF40.00300
Brand: Motoforce
Sintered brake pads from Motoforce Racing for sporty riding. Ideal for maintaining high braking performance. Sintered metal offers superior thermal properties, minimizing the heat at the brake piston and thus the heat of the brake fluid. Like other pads, these also need to be run in to achieve maximum braking power. For daily use, we recommend organic or...
Reference: S6-1021013
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: S6-1021011
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: S6-1021010
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: S6-1025013/R
Brand: Stage6
The Stage6 RACING brake pads are the right choice for all of you who like it fast and furious and still don’t want to do without safety and hard braking. The semi-metal brake pads distinguish themselves due to an excellent braking performance and an immediate response, which allows for fast and hard braking. Homologated for road use.
Reference: S6-1025011/R
Brand: Stage6
The Stage6 RACING brake pads are the right choice for all of you who like it fast and furious and still don’t want to do without safety and hard braking. The semi-metal brake pads distinguish themselves due to an excellent braking performance and an immediate response, which allows for fast and hard braking. Homologated for road use.
Reference: S6-1025010/R
Brand: Stage6
The Stage6 RACING brake pads are the right choice for all of you who like it fast and furious and still don’t want to do without safety and hard braking. The semi-metal brake pads distinguish themselves due to an excellent braking performance and an immediate response, which allows for fast and hard braking. Homologated for road use.
Reference: MF60.16608
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: MF78.14004
Brand: Motoforce
Fan wheel for the fixed front pulley in Piaggio engines type C/D, OEM quality. A matching fixed front pulley and a star washer can be found among the replacement parts.
Reference: MF78.19803
Brand: Motoforce
We can offer you a high-quality pulley from Motoforce at a bargain price.
Reference: MF78.16607
Brand: Motoforce
We can offer you a high-quality pulley from Motoforce at a bargain price.
Reference: MF78.14002
Brand: Motoforce
We can offer you a high-quality pulley from Motoforce at a bargain price.
Reference: MF78.16609
Brand: Motoforce
The pulley is CNC machined from high quality aluminium and is suitable for tuned engines. The pulley has been reinforced to be able to transfer the engine power without any risk. In addition, the CNC machined running surface ensures clean, low vibration V-belt operation.