List of products by manufacturer Scootertuning.ca

• 

  CAD$ 12.99 In stock

  Reference: BZA30432

  Brand: Scootertuning.ca

  

  Kickstart Castle Washer (Piaggio)

  kickstart engagement gear for Piaggio scooters with 2-stroke and 4-stroke engines from 1999 onwards. The teeth of the kickstart gear will wear out overtime due to use and must therefore be changed to ensure adequate engagement.

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: BT14430

  Brand: Scootertuning.ca

  

  Kickstart Castle Washer for GY6 50cc 139QMB/QMA

  Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing kickstarter issues.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: IP12107

  Brand: Scootertuning.ca

  

  Kickstart Castle Washer Minarelli (13mm)

  Accompanying kickstarter part. Should also be replaced when changing the cog.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: GY14636

  Brand: Scootertuning.ca

  

  Kickstart lever for GY6 125-150cc

  Folding kickstarter lever for 125/150cc GY6 4-stroke Chinese-built engines.

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 11.99 In stock

  Reference: IP15542

  Brand: Scootertuning.ca

  

  Kickstart lever spring (CPI-Vento-Keeway)

  Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.

  CAD$ 11.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 In stock

  Reference: IP12719

  Brand: Scootertuning.ca

  

  Kickstart lever Spring (Kymco)

  Recoil spring for kickstarter levers on all Peugeot and Kymco engines.

  CAD$ 9.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: BT12010

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear (7 Splines) for GY6 50cc 139QMB/QMA

  Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting issues can be traced to the kick-start. 2 different versions with either 7 or 8 teeth are currently used. This version is the 7-tooth version. Please check product image and compare to original part.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: BT24486

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear (8 Splines) for GY6 50cc 139QMB/QMA

  Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting issues can be traced to the kick-start. 2 different versions with either 7 or 8 teeth are currently used. This version is the 8-tooth version. Please check product image and compare to original part.

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 38.99 In stock

  Reference: 16287

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear (Kymco)

  Kick-starter sprocket with spring clip.

  CAD$ 38.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: 25762

  Brand: Scootertuning.ca

  

  Kickstart pinion gear (Piaggio)

  Carrier sprocket that matches the dimensions of the original.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: KW13990

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear Minarelli

  Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: BT14343

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear Spring for GY6 50cc 139QMB/QMA

  Kickstart pinion gear clip for GY6 50cc 139QMB/QMA

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: BT12001

  Brand: Scootertuning.ca

  

  Kickstart Shaft (46mm/20mm) for GY6 50cc 139QMB/QMA

  Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 20.99 Out of stock

  Reference: BT24483

  Brand: Scootertuning.ca

  

  Kickstart Shaft (48mm/22mm) for GY6 50cc 139QMB/QMA

  Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...

  CAD$ 20.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: BT16653

  Brand: Scootertuning.ca

  

  Kickstart Shaft (51mm/25mm) for GY6 50cc 139QMB/QMA

  Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: BT24484

  Brand: Scootertuning.ca

  

  Kickstart Shaft (61mm/35mm) for GY6 50cc 139QMB/QMA

  Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 20.99 In stock

  Reference: BT16654

  Brand: Scootertuning.ca

  

  Kickstart Shaft (63mm/21mm) for GY6 50cc 139QMB/QMA

  Kickstarter shaft [63mm / 21mm] - GY6 50cc

  CAD$ 20.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 15.99 In stock

  Reference: 12717

  Brand: Scootertuning.ca

  

  Kickstart Shaft (PGO / SYM)

  Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

  CAD$ 15.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 23.99 In stock

  Reference: IP12714

  Brand: Scootertuning.ca

  

  Kickstart shaft (Piaggio)

  A low-cost aftermarket part for defective kick-start shafts. Item matches design and size of the original.

  CAD$ 23.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: BT14344

  Brand: Scootertuning.ca

  

  Kickstart Shaft Bush for GY6 50cc 139QMB/QMA

  This bush sits in the crankcase cover and carries the kickstarter shaft. It can quickly become worn and cause kickstarter issues and, in extreme cases, can damage the crankcase cover. Do not forget this bush when changing the kickstarter shaft.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 18.99 In stock

  Reference: IP12716

  Brand: Scootertuning.ca

  

  Kickstart Shaft Minarelli Long

  Aftermarket part for defective kick-start shafts. Item matches design and size of the original.

  CAD$ 18.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: BT12006

  Brand: Scootertuning.ca

  

  Kickstart Shaft snap ring for GY6 50cc 139QMB/QMA

  Kickstarter retaining circlip

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: BT12005

  Brand: Scootertuning.ca

  

  Kickstart Shaft Washer for GY6 50cc 139QMB/QMA

  Base washer for kick-start spindle. Mounts on the outside of the crankcase cover and sits under the circlip.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: BT12004

  Brand: Scootertuning.ca

  

  Kickstart Spring for GY6 50cc 139QMB/QMA

  Kickstarter recoil spring.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: BZA30435

  Brand: Scootertuning.ca

  

  Kickstart Spring for pinion gear (Piaggio)

  Kickstart pinion retainer spring for Piaggio 50 to 150cc scooters.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 3.99 In stock

  Reference: BT12003

  Brand: Scootertuning.ca

  

  Kickstart Spring Plastic ring for GY6 50cc 139QMB/QMA

  This plastic spacer prevents the kickstarter spring from rubbing against the crankcase cover, making it easier to turn over.

  CAD$ 3.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 20.99 In stock

  Reference: 17636

  Brand: Scootertuning.ca

  

  Kill switch racing version (Handlebar)

  This system is used mainly in water sports (jet ski etc.). Simply attach the emergency kill switch to the handlebar. The purpose of this kill switch isn't solely cosmetic, it also is very useful when falling: the ignition is immediately switched off so the engine doesn't suffer any damages. You can also use it as an unobtrusive immobilizer.

  CAD$ 20.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 107.99 In stock

  Reference: 81130-GAH-000

  Brand: Scootertuning.ca

  

  Knee Cover Honda Dio Black

  CAD$ 107.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 74.99 In stock

  Reference: BM02140

  Brand: Scootertuning.ca

  

  Knee Cover PGO Bigmax Black

  CAD$ 74.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 87.99 In stock

  Reference: SCTFR028

  Brand: Scootertuning.ca

  

  Knee Cover Yamaha Bws/Zuma 02-11

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 87.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 65.99 Out of stock

  Reference: 3KJ-28300-00

  Brand: Scootertuning.ca

  

  Knee Cover Yamaha Jog Black

  CAD$ 65.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  New

  Reference: SCT-LIR001

  Brand: Scootertuning.ca

  

  Led Indicator relay (Bws/Zuma 2002-2011)

  Led Indicator relay Plug & Play for BWS/Zuma 02-11

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: U-315

  Brand: Scootertuning.ca

  

  Left Control Switch - Aprilia SR50 Morini 2004-2008 - USED

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 Out of stock

  Reference: VC20140

  Brand: Scootertuning.ca

  

  Left front indicator light lens Amber (SR50 Minarelli)

  Replacement front left indicator glass for Aprilia SR50 Di-Tech Scooters and SR50 Street scooters. Matches original item. Replaces OEM-No.: 8224210. Also suitable for the following models: Aprilia Leonardo 125 / 150 / 250 (99-01) Aprilia Leonardo 125 / 150 / 250 ST (01-)

  CAD$ 10.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 10.99 Out of stock

  Reference: VC20144

  Brand: Scootertuning.ca

  

  Left front indicator light lens transparent (SR50 Minarelli)

  Replacement front left indicator glass for Aprilia SR50 Di-Tech Scooters and SR50 Street scooters. Matches original item. Replaces OEM-No.: 8224210. Also suitable for the following models: Aprilia Leonardo 125 / 150 / 250 (99-01) Aprilia Leonardo 125 / 150 / 250 ST (01-)

  CAD$ 10.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 28.99 In stock

  Reference: BT13955

  Brand: Scootertuning.ca

  

  Left handle switch assy with brake lever (Version 1)

  Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as various switchgears are factory-fitted on different models. ATTENTION: this switchgear is only suitable for scooters with a separate fitting for the rear brake The brake lever mount is not on this switch gear.

  CAD$ 28.99

  Add to cart More

  In stock

  Add to Compare