No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Replacement OEM Honda Parts.
Reference: 83620-GAH-000
Brand: Scootertuning.ca
Reference: 3KJ-2171L-00
Brand: Scootertuning.ca
Reference: U-071
Brand: Scootertuning.ca
Reference: SCT-LPS422/BK
Brand: Scootertuning.ca
12V License plate screw with white led light included.
Reference: BT25765
Brand: Scootertuning.ca
Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm & 20 Watt 5,9 Ohm)
Reference: 1300-1007
Brand: Scootertuning.ca
A total no-brainer! This kit makes your oil drain bolt magnetically charged to pick up any particles floating in the oil. It's the oldest trick in the book, for good reason--it works! Fits Buddy, Black Cat, Rattler, Kymcos, Lance, Rocketta, Tank, and virtually any other GY6-based engine.
Reference: U-068
Brand: Scootertuning.ca
Only fit with malossi second roller gear The roller bearing need to be replaced
Reference: U-077
Brand: Scootertuning.ca
Reference: U-037
Brand: Scootertuning.ca
Fit on aprilia/ piaggio 125-200cc eur 5 and euro 5+ 2022 -> vespa 125-150 2017 - 2024
Reference: U-013
Brand: Scootertuning.ca
Reference: IP23150
Brand: Scootertuning.ca
You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables.
Reference: SCT-MCHC/BWS0211
Brand: Scootertuning.ca
We can offer here Replacement Brake caliper with hose and master cylinder for Yamaha Bws/Zuma 2002-2011.
Reference: U-367
Brand: Scootertuning.ca
Reference: SCT-MF1P88
Brand: Scootertuning.ca
Reference: SCT-MSS19
Brand: Scootertuning.ca
Reference: U-061
Brand: Scootertuning.ca
Reference: U-024
Brand: Scootertuning.ca
only for Peugeot Ludix Speedfight 3 AC LC
Reference: U-018
Brand: Scootertuning.ca
brake pads compatible with suzuki AH 50 92-95, AN 125 95-99, AN 150 95-99, Epicuro 125/150 and street magic 50
Reference: U-083
Brand: Scootertuning.ca
Reference: CY00245
Brand: Scootertuning.ca
Replacement Nut for Variator and Ignition for PGO and Genuine scooter.
Reference: BT80005
Brand: Scootertuning.ca
Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.
Reference: IP15427
Brand: Scootertuning.ca
Oil filler plug for Kymco, GY6 50/125/150cc – Silver
Reference: VC25755
Brand: Scootertuning.ca
Oil filters must be fitted at every oil change. Regular filter changes mean smoother engine running. R13440421A0 / AP8580128 / 82635R / 483727 / 210483727 / 46400200
Reference: BT13857
Brand: Scootertuning.ca
Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.
Reference: BT13856
Brand: Scootertuning.ca
Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.
Reference: BT80011
Brand: Scootertuning.ca
Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.
Reference: BT10007
Brand: Scootertuning.ca
139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted with either 16 or 22 teeth. This also means two different oil pumps are used. The item pictured is the 16 tooth version.
Reference: BT14782
Brand: Scootertuning.ca
139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted with either 16 or 22 teeth. This also means two different oil pumps are used. The item pictured is the 22 tooth version.
Reference: KW13974
Brand: Scootertuning.ca
Complete oil pump for Minarell-based 2-stroke engines from CPI, Keeway, Generic, Mawi, Longija etc. Delivery as shown. Also suitable for Adly 50cc 2-stroke engines.
Reference: GY14662
Brand: Scootertuning.ca
Complete oil pump for 125/150cc GY6 engines. Delivery as shown.
Reference: VC31103
Brand: Scootertuning.ca
Oil pump drive belt. Suitable for Piaggio, Gilera, Vespa and other scooters with Piaggio engine, e.g., Aprilia or Derbi vehicles. OEM number for purpose of comparison: Piaggio 286162
Reference: BT13855
Brand: Scootertuning.ca
Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 16 tooth crankshaft. This gear has 33 teeth.
Reference: BT14783
Brand: Scootertuning.ca
Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.