List of products by supplier: Racing-Planet

• 

  CAD$ 45.99 In Stock

  Reference: IP32345

  Brand: Scootertuning.ca

  

  Regulator / Rectifire (Aprilia SR50 Piaggio)

  The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out.

  CAD$ 45.99

  Add to cart More

  Add to Compare
• 

  CAD$ 21.99 In Stock

  Reference: BT20902

  Brand: Scootertuning.ca

  

  Regulator / Rectifire 4-pins incl. Wire for GY6 50-150cc

  The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...

  CAD$ 21.99

  Add to cart More

  Add to Compare
• 

  CAD$ 9.99 In Stock

  Reference: IP18059

  Brand: Scootertuning.ca

  

  Reinforced Clutch Spring Minarelli

  Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleration. We recommend this set for those who nip about in traffic or if your engine struggles with drive on inclines. Fits the original clutch. Set contains 3 springs. A great product, available in various stiffness’s.

  CAD$ 9.99

  Add to cart More

  Add to Compare
• 

  CAD$ 105.99 Out of stock

  Reference: 17205

  Brand: Scootertuning.ca

  

  Reinforced Crankshaft (Kymco)

  Good quality crank for horizontal 50cc Kymco and SYM AC / LC engines. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders. Crank with short variator stump: approx.. 9.6cm from crank cheek, please check prior to ordering. We recommend a new set of crank bearings and oil seals be ordered.

  CAD$ 105.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 106.99 In Stock

  Reference: IP32577

  Brand: Scootertuning.ca

  

  Reinforced electric starter motor for GY6 125-150cc

  Reinforced starter motor with more power for 125 and 150cc scooters with the GY6 engine. Very good option for use on tuned engines.

  CAD$ 106.99

  Add to cart More

  Add to Compare
• 

  CAD$ 32.99 In Stock

  Reference: GY14626

  Brand: Scootertuning.ca

  

  Remplacement Clutch Bell GY6 125-150cc

  Replacement aftermarket clutch bell. Already blued clutch bells tend mean slipping and deforming of the plates. This means the bell cannot run true, which often leads to damage in the transmission and drive systems.

  CAD$ 32.99

  Add to cart More

  Add to Compare
• 

  CAD$ 57.99 In Stock

  Reference: GY16726

  Brand: Scootertuning.ca

  

  Remplacement Clutch GY6 125-150cc

  Jumpy drive and bad power transfer are usually signs that the clutch plates are either worn or glazed. The only solution is to change the plates. When servicing, it is a good rule to change the complete clutch, as the clutch body needs to be disassembled, to give access to the plates. Complete Asian-designed clutch. Supplied as shown and without clutch bell.

  CAD$ 57.99

  Add to cart More

  Add to Compare
• 

  CAD$ 38.99 In Stock

  Reference: KW13965

  Brand: Scootertuning.ca

  

  Remplacement Cylinder Head 50cc Minarelli Horizontal

  Aftermarket cylinder head [combustion chamber diameter = 40mm] for 50cc horizontal Minarelli and CPI engines. Also suitable for Keeway, Generic, Mawi, Longjia vehicles with 2-stroke, 50cc 1PE40QMB engines. Attention on Chinese engines: This cylinder head uses a short thread spark plug e.g.: (NGK Type H means short thread). e.g.: BR8HSA, BR8HS

  CAD$ 38.99

  Add to cart More

  Add to Compare
• 

  CAD$ 21.99 In Stock

  Reference: GY15421

  Brand: Scootertuning.ca

  

  Remplacement Front Pulley GY6 125-150cc

  Outer v-belt pulley for GY6 125/150cc 4-stroke Chinese-built engines.

  CAD$ 21.99

  Add to cart More

  Add to Compare
• 

  CAD$ 14.99 In Stock

  Reference: GY14645

  Brand: Scootertuning.ca

  

  Remplacement intake manifold (32mm) GY6 125-150cc

  Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.

  CAD$ 14.99

  Add to cart More

  Add to Compare
• 

  CAD$ 16.99 In Stock

  Reference: NK201.23

  Brand: Naraku

  

  Repair Kit Naraku for PHBG (19-21mm)

  Naraku carburettor repair kit for PHBG carbs.

  CAD$ 16.99

  Add to cart More

  Add to Compare
• 

  CAD$ 34.99 In Stock

  Reference: NK201.22

  Brand: Naraku

  

  Repair Kit Naraku for PHVA / PHBN (14-17.5mm)

  Naraku carburettor repair kit for PHVA / PHBN carbs.

  CAD$ 34.99

  Add to cart More

  Add to Compare
• 

  CAD$ 34.99 In Stock

  Reference: IP22167

  Brand: Naraku

  

  Repair Kit Naraku for PWK (21-28mm)

  Repair/spare part kit for PWK carburettors made by 101 Octane. Suitable for Keihin PWK carbs, as well as OKO, KOSO, NARAKU, Stage6 R/T and many more.

  CAD$ 34.99

  Add to cart More

  Add to Compare
• 

  CAD$ 20.99 In Stock

  Reference: IP34482

  Brand: Scootertuning.ca

  

  Replacement Brake pads (Kymco)

  Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.

  CAD$ 20.99

  Add to cart More

  Add to Compare
• 

  CAD$ 14.99 In Stock

  Reference: IP34476

  Brand: Scootertuning.ca

  

  Replacement Brake Pads (Vespa)

  Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.

  CAD$ 14.99

  Add to cart More

  Add to Compare
• 

  CAD$ 26.99 In Stock

  Reference: VC19878

  Brand: Scootertuning.ca

  

  Replacement Brake Shoes (Vespa-Derbi)

  Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x25mm. For rear brake use on the Derbi Atlantis, Gilera and Piaggio models).

  CAD$ 26.99

  Add to cart More

  In Stock

  Add to Compare
• 

  CAD$ 25.99 Out of stock

  Reference: VC19077

  Brand: Scootertuning.ca

  

  Replacement Brake Shoes Honda Ruckus / Dio / Elite

  Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 95x20mm.

  CAD$ 25.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 69.99 In Stock

  Reference: 27242

  Brand: Scootertuning.ca

  

  Replacement Caliper Red (CPI-Vento-Keeway)

  One piston brake caliper for front brake inclusive pads for China, Generic, CPI, Rieju. Red in color.

  CAD$ 69.99

  Add to cart More

  Add to Compare
• 

  CAD$ 62.99 In Stock

  Reference: KW13987

  Brand: Scootertuning.ca

  

  Replacement Carburetor 12mm (Electric Choke)

  Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke.Requires a single throttle cable. 

  CAD$ 62.99

  Add to cart More

  Add to Compare
• 

  CAD$ 97.99 Out of stock

  Reference: KW33762

  Brand: Scootertuning.ca

  

  Replacement Carburetor 18mm (Electric Choke)

  Unrestricted 18mm carburettor for all 2-stroke scooters with Minarelli & chinese Minarelli clone 1E40QMB engines (Minarelli replica air-cooled) Comes with electric choke. Requires a single throttle cable.

  CAD$ 97.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 85.99 Out of stock

  Reference: BT16001

  Brand: Scootertuning.ca

  

  Replacement Carburetor 19mm for GY6 50cc

  Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is a Chinese-builtcarb and matches the quality of the original item.

  CAD$ 85.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 125.99 Out of stock

  Reference: NK201.06

  Brand: Naraku

  

  Replacement Carburetor Naraku (Genuine-PGO-Kymco)

  Naraku carburettor with electric choke for use with Kymco SF10 horizontal engines. Jetting: Main jet = 78, Pilot Jet=35, Needle type=2RFM. Tuned for Euro I so jetting will need to be adjusted for use on Euro II vehicles.

  CAD$ 125.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 50.99 In Stock

  Reference: IP32340

  Brand: Scootertuning.ca

  

  Replacement CDI (DC) Kymco Super 9 LC

  Replacement CDI unit for Kymco Super 9 LC, Top Boy, Yager, People Dink and Grand Dink 50 scooters. Please compare your original unit with that shown in the image. Only suitable for scooters with DC ignition system. 30410-KEB7-E0B / 30410-KGB5-E0A / 30400-KFA6- E0A / 30410-KHE6-E0B / 30400-LDA5-E0A

  CAD$ 50.99

  Add to cart More

  Add to Compare
• 

  CAD$ 54.99 In Stock

  Reference: IP31349

  Brand: Scootertuning.ca

  

  Replacement CDI Unit (DC) Sym-Kymco-Peugeot

  Replacement CDI unit matching factory fitted CDI suitable for Kymco, SYM and Peugeot 50cc 4 stroke scooters.

  CAD$ 54.99

  Add to cart More

  Add to Compare
• 

  CAD$ 53.99 In Stock

  Reference: VC30942

  Brand: Scootertuning.ca

  

  Replacement Clutch (Kymco Bet/Gdink 125-200cc)

  Replacement clutch for various 125cc 4 stroke Kymco scooters. Clutch matches original specification.

  CAD$ 53.99

  Add to cart More

  In Stock

  Add to Compare
• 

  CAD$ 85.99 In Stock

  Reference: IP32254

  Brand: Scootertuning.ca

  

  Replacement Clutch (Piaggio 125-300)

  Replacement clutch with 3 shoes for maxi scooters with Piaggio 125cc 4 stroke engines.

  CAD$ 85.99

  Add to cart More

  In Stock

  Add to Compare
• 

  CAD$ 89.99 In Stock

  Reference: BT7001-16

  Brand: Scootertuning.ca

  

  Replacement Crankshaft (16 tooth) GY6 50cc

  Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engines are factory-fitted with 2 different versions of crank. The only difference is the oil pump drive cog on the right-hand side. The old version, installed in almost all vehicles, has a 16 tooth cog. The new...

  CAD$ 89.99

  Add to cart More

  Add to Compare
• 

  CAD$ 114.99 Out of stock

  Reference: BT7001-22

  Brand: Scootertuning.ca

  

  Replacement Crankshaft (22 tooth) GY6 50cc

  Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engines are factory-fitted with 2 different versions of crank. The only difference is the oil pump drive cog on the right-hand side. The old version, installed in almost all vehicles, has a 16 tooth cog. The new...

  CAD$ 114.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 159.99 In Stock

  Reference: IP21633

  Brand: Scootertuning.ca

  

  Replacement Crankshaft (AF16)

  Very good quality aftermarket crank for Honda SYM AF28 and Kymco GR1 engines. The crank is a 100% match to the original and is an outstanding aftermarket item. Also a good everyday choice for lightly-tuned 70cc sports engines. Crank requires 12mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of bearings and...

  CAD$ 159.99

  Add to cart More

  Add to Compare
• 

  CAD$ 132.99 In Stock

  Reference: IP12140

  Brand: Scootertuning.ca

  

  Replacement Crankshaft (Kymco)

  Very good quality aftermarket crank for horizontal 50cc Kymco AC, LC and SF10 engines. The crank is a 100% match to the original and is an outstanding aftermarket item. Also a good everyday choice for lightly-tuned 70cc sports engines. Crank requires 12mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of...

  CAD$ 132.99

  Add to cart More

  Add to Compare
• 

  CAD$ 104.99 Out of stock

  Reference: IP34883

  Brand: Scootertuning.ca

  

  Replacement Crankshaft Standard 10mm

  Value replacement crankshaft for scooters with vertical Minarelli engines. Shipped with small end bearing included.

  CAD$ 104.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 73.99 Out of stock

  Reference: IP11998

  Brand: Scootertuning.ca

  

  Replacement Cylinder 50cc 10mm Minarelli Vertical

  Standard cylinder kit for vertical air-cooled Minarelli engines. Great price! The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder...

  CAD$ 73.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 47.99 In Stock

  Reference: IP34723

  Brand: Scootertuning.ca

  

  Replacement Cylinder Head 50cc Minarelli Vertical

  Replacement scooter cylinder head for all air cooled 50cc Minarelli engines with upright cylinders.

  CAD$ 47.99

  Add to cart More

  Add to Compare
• 

  CAD$ 66.99 In Stock

  Reference: IP12013

  Brand: Scootertuning.ca

  

  Replacement Cylinder kit 50cc 10mm Minarelli Horizontal

  Great price cylinder kit for horizontal air-cooled Minarelli engines. The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder head can...

  CAD$ 66.99

  Add to cart More

  Add to Compare
• 

  CAD$ 35.99 In Stock

  Reference: VC24934

  Brand: Scootertuning.ca

  

  Replacement Drive belt (Kymco 125-200cc)

  Good quality replacement drive belt for various 125, 150 und 200cc Kymco and Malaguti Maxi scooters. Dimensions: 798*20. Replaces OEM-No.: 23100KEC4900 / 51700700 / 00127785.

  CAD$ 35.99

  Add to cart More

  In Stock

  Add to Compare
• 

  CAD$ 31.99 In Stock

  Reference: VC23782

  Brand: Scootertuning.ca

  

  Replacement Drive belt (Kymco Bet/Gdink 125-200cc)

  Good quality replacement drive belt for various 125 and 150cc Aprilia, Keeway, Kymco, Malaguti und SYM Max scooters. Dimensions: 816*18.5*28

  CAD$ 31.99

  Add to cart More

  In Stock

  Add to Compare