No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Viewed products
Replacement Flywheel Spoiler for PGO
One of the main things necessary to set up a...
Torque springs are important for the...
Reference: S6-2216602
Brand: Stage6
The gearbox cover is CNC-machined from high-quality aluminum alloy. High-quality SKF bearings ensure maximum performance and durability. When developing this tuning cover, particular attention was paid to the rigidity and solidity of the gearbox cover. The focus was not on a lightweight gearbox cover, but a stiff and robust cover that offers excellent...
Reference: S6-0360
Brand: Stage6
High-quality foam donuts from Stage6 for Enduro / crossbike handlebar grips. These coated donuts will simply be placed on the grips to help prevent thumb blisters. Sold as pair.
Reference: S6-56166ET006
Brand: Stage6
The Stage6 torque drive is a stand-out piece of equipment, offering plenty of options for adjustment. 2 different slots (37? and 40? gradient) for adjusting pulley opening angle and speed which will influence the performance of the transmission.
Reference: S6-56166ET008
Brand: Stage6
The Stage6 torque drive is a stand-out piece of equipment, offering plenty of options for adjustment. 2 different slots (39? and 42? gradient) for adjusting pulley opening angle and speed which will influence the performance of the transmission.
Reference: S6-195020
Brand: Stage6
Stage6 handlebar grips in Stickerbomb look, for a bit of urban style customizing. The new grips combine various Stage6 and Stage6 R/T logos in a wild graffiti design, which is permanently protected by a high-quality transparent coating. The grips are comfortable to hold and have a non-slip coating. The inner flange is reinforced to provide optimum support...
Reference: S6-195010
Brand: Stage6
These are high-quality dual compound grips. Most versions are two-tone plus an all-black version for those who like it classic and simple. STAGE6 put a lot of effort into the design of their grips. The result are these unique looking grip sleeves that stand out from all other grips on the market and will make your scooter or moped a real eye-catcher. The...
Reference: S6-030100
Brand: Stage6
This special tool is ideal for the Stage6 R/T CNC-type clutch bells. The bell has two indentures in the cooling ring where this tool can be inserted to grip and lock the bell and undo the screws without having to resort to an impact screwdriver.
Reference: HOODYS6/
Brand: Stage6
New editions of the coveted hoodies with Stage6, Stage6 R/T and “Scootertuning is not a crime” logos are now available. The logos are screen-printed on the front. Material: 65% cotton, 35% polyester
Reference: HOODYS6RT/
Brand: Stage6
New editions of the coveted hoodies with Stage6, Stage6 R/T and “Scootertuning is not a crime” logos are now available. The logos are screen-printed on the front. Material: 65% cotton, 35% polyester
Reference: S6-45ET002
Brand: Stage6
Stage6 R/T Base Plate for inner rotor ignition Minarelli, spare part for PVL inner rotor ignition by Stage6 R/T, anodized orange. As a matter of course we carry all kinds of spare parts for Stage6 tuning products. This is the base plate of the Stage6 R/T inner rotor ignition (PVL) for Minarelli engines to securely mount the ignition. It is made of HQ...
Reference: S6-45ET007
Brand: Stage6
Stage6 R/T Ignition Coil for PVL inner rotor ignition Piaggio / Minarelli, spare part for the Stage6 R/T inner rotor ignition (PVL). Replacement in case your original coil got short-circuited or otherwise damaged.
Reference: S6-3314001/RB
Brand: Stage6
High quality rubber intake manifold from Stage6 for all Piaggio engines. With its fitting diameter of 30mm, it is a perfect match for the Stage6 TM 24 carburetor kit.
Reference: S6-3314002/VT
Brand: Stage6
The short Stage6 Piaggio intake manifold is an inexpensive and excellent alternative to the rather expensive models of other manufacturers. A short intake tract offers better responsiveness and the intake rpm will be raised even further, which gives more power. So-called biofuels are becoming more and more popular. They may, however, contain up to 20% of...
Reference: S6-3314015/OR
Brand: Stage6
CNC-milled intake manifold spacer with very sturdy high-quality carburettor installation stud made of FKM (Viton®). The spacer lets you directly install Stage6 R/T VHST and flat-slide carburettors facing the rear wheel without the carb being at a too low angle that would result in overflow. Special attention has been paid to the design of the intake...
Reference: S6-3316617/OR
Brand: Stage6
CNC-milled intake manifold with very sturdy high quality carburettor installation stud made of FKM (Viton). In combination with the Stage6 subframe, the spacer lets you directly install Stage6 R/T VHST and PWK carburettors facing the rear wheel without the carb being at a too low angle that would result in overflow. Special attention has been paid to the...
Reference: S6-3216600
Brand: Stage6
incl. 23mm adaptor (Dellorto 10 - 21mm, Arreche 17 - 21mm), reed valve (Boysen style), stuffers, connections for boost bottle and oil. Complete intake system from Stage6. Consists of a teflon-coated intake manifold with oil and vacuum connections, gaskets and a vulcanized reed block. The big 2-petal reed block, combined with a carburetor of 19mm or more,...
Reference: S6-3217500
Brand: Stage6
Complete intake system from Stage6. Consists of a teflon-coated inlet manifold with oil and vacuum connections, gaskets and the new SportPro (NBR) reeds. The big 2-petal reed block, combined with a carburettor of 19mm or more, unleashes much more power than the original 1-petal reed block. The rubber piece can be replaced in order to convert to bigger...
Reference: S6-3214000
Brand: Stage6
No matter which carburettor you want to use - the Stage6 Piaggio intake system is your choice! The kit includes 2 intake manifolds and Venturi inserts that are adapted to the respective reed blocks. These Stage6 products make it possible to easily mount all common carbs to your Piaggio engine. In order to get ideal engine response, the intake tract has...
Reference: S6-3216800
Brand: Stage6
No matter which carburettor you want to use -the Stage6 intake system is your choice! Contrary to the parts of other manufacturers who use their own reed blocks, the Stage6 Bigvalve system is based on a reed cage for horizontal Minarelli engines. This allows for great opportunities to optimise performance by using different reed blocks such as the Stage6...
Reference: S6-4516601
Brand: Stage6
The PVL internal rotor ignition from Stage6 R/T got an upgrade! The new MK 2 internal rotor ignition from Stage6 R/T for scooters with Minarelli engine now comes with a programmable CDI to give you the ability to adjust the ignition curve to match your engine setup and preferences. OPTIONAL CDI IGNITION CURVE PROGRAMMING If you don't want to (or can't)...
Reference: S6-4516601/KR
Brand: Stage6
Pragrammable Inner rotor ignition for Yamaha and Malaguti scooters The PVL internal rotor ignition from Stage6 R/T got an upgrade! The new MK 2 internal rotor ignition from Stage6 R/T for 50cc scooters with Minarelli engine now comes with a programmable CDI to give you the ability to adjust the ignition curve to match your engine setup and preferences....
Reference: S6-4514001
Brand: Stage6
With PVL, we have managed to find a distinguished and competent partner to develop and manufacture our ignition. PVL has supplied hardware, we have contributed the software, i.e. the two selectable ignition curves, based on years of experience in circuit and drag racing and on dyno runs.
Reference: S6-SSP260KS/
Brand: Stage6
The new version of the Stage6 CNC kickstarter, called EVO, comes in a completely new design. As a nice little new feature, the round pedal has been replaced by a flat one. Prices of these parts are unfortunately slightly higher due to the fact that while CNC-milled products can be produced in relatively small quantities, they involve an increased...
Reference: S6-0295
Brand: Stage6
With the Stage6 magnet kill switch, we can offer you a state-of-the-art product as it is used in motorsport. Nevertheless, it can also come in handy if you only use your scooter to commute from A to B, as it can be used like a small but effective immobiliser: it prevents the engine from being started when the ignition lock has been short-circuited.
Reference: S6-4040ET06
Brand: Stage6
or the Stage6 accelerometer, screws with integrated magnets can be used as signal transmitters. This is probably the most elegant solution. Comes in a set of two. dimensions: M10x1.25 / 28.3mm
Reference: S6-28GY6-001
Brand: Stage6
This kit is ideal to adjust GY6 carburettors. 10 main jets, stored in a practical plastic box so you'll find the right one directly without searching around. Also quite a bit cheaper than ordering the jets individually. The kits are available in different sizes; each kit contains 10 M4 main jets. Sizes: 60, 62, 64 ... 80 (without 78)
Reference: S6-28GY6-002
Brand: Stage6
This kit is ideal to adjust GY6 carburettors. 10 main jets, stored in a practical plastic box so you'll find the right one directly without searching around. Also quite a bit cheaper than ordering the jets individually. The kits are available in different sizes; each kit contains 10 M4 main jets. Sizes: 82, 84, 86 ... 100
Reference: S6-28DEL5-
Brand: Stage6
Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 5mm main jets will fit 19-21mm Dellorto carburetors. Available in different ranges of sizes.
Reference: S6-28DEL6-
Brand: Stage6
Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 6mm main jets will fit all 12- 17.5mm and also 22mm Dellorto carburetors. Available in different ranges of sizes.
Reference: S6-28KH-
Brand: Stage6
Ideal kit to set up your carburetor. 10 main jets in a handy plastic box, which makes it easier to grab the right one. And it's also cheaper than buying the jets individually. A set includes 10 mainjets. There are different sets for all 21 to 28mm PWK carburetors, or 17.5 to 23mm Polini CP carburetors, each available in two different ranges of sizes.
Reference: S6-SSP630-2L/
Brand: Stage6
There aren't that many high-quality mirrors in F1 look on the market, but now the Stage6 Styling Department has taken care of this problem. The results are mirrors that sport an unobtrusive Stage6 logo; with real mirror glass, ball joint with wide adjustment range and in first-rate colour versions. Fitting for all scoots with M8 thread; for Peugeot...
Reference: S6-SSP630-2R/
Brand: Stage6
There aren't that many high-quality mirrors in F1 look on the market, but now the Stage6 Styling Department has taken care of this problem. The results are mirrors that sport an unobtrusive Stage6 logo; with real mirror glass, ball joint with wide adjustment range and in first-rate colour versions. Fitting for all scoots with M8 thread; for Peugeot...
Reference: S6-SSP140/
Brand: Stage6
Oil Filler Cap Stage6 Minarelli (e.g. Yamaha Aerox) - stylish colorful anodized oil plug for optimal sealing of the crankcase. Well-sealing oil filler screws are crucial for the operability of the gearbox. The oil plug closes the filler opening of the case, a high-quality O-ring ensures perfect sealing. The oil plugs are made of a high quality aluminium...
Reference: S6-SSP141/
Brand: Stage6
Oil Filler Cap Stage6 Piaggio - stylish colorful anodized oil plug for optimal sealing of the crankcase. Well-sealing oil filler screws are crucial for the operability of the gearbox. The oil plug closes the filler opening of the case, a high-quality O-ring ensures perfect sealing. The oil plugs are made of a high quality aluminium alloy (7075) and come...