No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
The water pump cover "EXTREM CUT"...
Reference: 34380
Brand: Scootertuning.ca
Replacement Front Disc brake for most CPI, Vento & Keeway scooter.
Reference: MF93.001
Brand: Motoforce
Budget fork for CPI Hussar and Popcorn. Tube diameter is 30mm, spring rate is slightly higher than the one of the original fork, hence these forks are less likely to bottom out than the standard one. In addition to that, damping of fork may be adjusted by using different grades of fork oil.
Reference: GY6-studs-208/218-4V
Brand: Taida
Taida Extended cylinder studs (208/218). Set of 4 studs.
Reference: GY6-studs-195/203
Brand: Taida
Taida Extended cylinder studs (195/202). Set of 4 studs.
Reference: BM012501-3
Brand: Scootertuning.ca
Replacement side stand available in wide color selection for PGO and Genuine Scooter.
Reference: RH-073
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Several design available!
Reference: RH-055
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Several design available!
Reference: 2913137
Brand: Malossi
Made for MALOSSI FLY and DELTA clutches. Pre-hardened carbon steel springs, with high yield strength, that are protected by a high heat-resistant paint in various colours. The different colouring shows the stiffness of each spring series.
Reference: GY6-PM001-OR-1
Brand: Taida
Reference: FLP-026
Brand: FLP
Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.
Reference: RH-137
Brand: Ruckhouse
Reference: TRS-TR005/BK-F
Brand: TRS
Always trying to find a way to tie down your Ruckus? Mounting easily to the front fork assembly with supplied hardware in minutes giving you a sturdy place to attach tie-downs to your Ruckus. We have extended the hooks outwards for better clearence of parts and Fenders. Ideal for mounting in the bed of a truck, a lift or a trailer. CNC machined from solid...
Reference: RH-054
Brand: Ruckhouse
RuckHouse Forward Foot Pegs Aircraft Grade 6061 Billet Aluminum solid construction Fits stock frame, No modification required. Bolt on and Go Will also fit shaved frames. Mild 3" extension for more comfortable riding position. Made in USA
Reference: 5115639
Brand: Malossi
The sport transmission with the racing acceleration that can't be beat! A jewel to mount on your scooter. Too bad it can't be displayed, it is so perfect! Designed by engineers with great experience, produced entirely in the Malossi factory, utilizing robots with the highest precision.
Reference: 6215005BR
Brand: Malossi
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
Reference: TH46ADIO50-TD002-RE
Brand: Scootertuning.ca
Reference: PACK00102
Brand: Bcd
BCD offers here RX pack for Yamaha Bws'R. The kit includes a front fairing RX,a rear fairing with stop LED, optical RX 2x20W halogen, a shoe and a set of side skirts. Congratulations to BCD team for this achievement. Attention : To install on Bws'R, you will need all fairing of european mbk booster 2004+
Reference: 3417764
Brand: Malossi
Replacement piston for the 79cc Malossi cylinder kit. Delivered as shown with piston rings, gudgeon pin and circlips.
Reference: 17205
Brand: Scootertuning.ca
Good quality crank for horizontal 50cc Kymco and SYM AC / LC engines. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders. Crank with short variator stump: approx.. 9.6cm from crank cheek, please check prior to ordering. We recommend a new set of crank bearings and oil seals be ordered.
Reference: 28-5228
Brand: FLY
Stow your moto gear and other goods with the dignity they deserve — and do it with the FLY Racing luggage line. With styles and sizes to perfectly suit you, you’ll have plenty of options. Whether it’s a roller, backpack, or duffle, tote your stuff confidently no matter where your next ride takes you.
Reference: SCT-HD005
Brand: Scootertuning.ca
High Quality ScooterTuning Hoody with Boston Theme.
Reference: P400099100001
Brand: Athena
High performance Mid-race 70cc aluminum cylinder kit made in Italy by Athena. With the thermal advantages of aluminum provides these cylinders with better cooling and a higher peak power than cast-iron cylinder. Performance between 16-19 hp can be reached. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: 209.0464
Brand: Polini
This is the complete gasket set for Big Polini Evolution cylinder kit. Check the picture to see which gaskets are included.
Reference: P1030/1481
Brand: 2Fast
This is the complete gasket set for 2Fast cylinder kit. Check the picture to see which gaskets are included.
Reference: T9910430
Brand: Top performances
Replacement piston for Top performance 50cc cylinder kits.
Reference: GY15421
Brand: Scootertuning.ca
Outer v-belt pulley for GY6 125/150cc 4-stroke Chinese-built engines.
Reference: VC23268
Brand: Scootertuning.ca
Replacement H8 halogen 12V 55W headlight bulb with PGJ19-1 base. Please compare item specifics with your current bulb for compatibility.
Reference: EB167
Brand: Easyboost
Ignition holding tool universal Easyboost allows you to easily loosen the nut holding the magnetic flywheel of all 50cc scooter (MBK Booster, Nitro, Peugeot, Piaggio, MBK 51, Peugeot 103...), and 50cc AM6 (TZR, Rieju, Beta...) or Derbi engines. Thanks to its special shape, you can loosen the nut of an internal rotor ignition, whether it is a PVL, Selettra...
Reference: SCT-OSI044
Brand: Scootertuning.ca
Special Aluminium tool to install variator side oil seal to the correct dept for minarelli engine.
Reference: WB-5034
Brand: Buzzetti
Universal tool to quickly remove bearings, e.g. stubborn bearings on the crankshaft. For bearings with a diameter of 19 - 45mm.
Reference: MF99.00095
Brand: Motoforce
Rubber mallet from Motoforce for all common work on your scoot. Especially useful when removing the crankshaft or engine. Head completely made of hard rubber with wooden handle. Diameter of contact surface: 55mm
Reference: PREM09
Brand: MVT
The MVT Premium ignition may well be one of the most advanced ones on the market. It is the first "real" inner rotor ignition with lighting coil as it makes it possible to supply the complete electrical system of a scoot with power whereas other manufacturers such as Polini so far have only offered ignitions with variable voltage that allows for using the...
Reference: S6-4081/OR
Brand: Stage6
The popular digital speedometer from Stage6 R/T received an upgrade: the MK 2 version of the Stage6 R/T multifunction dashboard instrument can now also display EGT (exhaust gas temperature). The display is backlit, the device measures 100x60x20mm and is run via the 12V on-board voltage. RPM is measured inductively, speed via a magnetic sensor attached to...