Top sellers

• 

  CAD$ 3.99 In stock

  Reference: SCT-GA004

  Brand: Scootertuning.ca

  

  Alternator Gasket Minarelli Horizontal

  Replacement gasket that will be fitted below the alternator stator. Some trimming could be required in some cases.

  CAD$ 3.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 28.99 In stock

  Reference: STR-205.51/

  Brand: Str8

  

  Riser kit STR8 XL Universal

  So raising your chassis by 40mm is still not enough for you? Then go for this XL riser kit with an enormous 60mm length. Fitting takes only a few minutes. Using a side stand is recommended. Please take into account that you will have to rotate the rear shock by 90 degrees and that you might run into problems due to lack of space.

  CAD$ 28.99

  More

  In stock

  Add to Compare
• 

  CAD$ 259.99 In stock

  Reference: 317237

  Brand: Malossi

  

  Cylinder kit Malossi SPORT 70cc 10mm Minarelli Vertical

  With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an easy-to-adjust, strong sport cylinder. It...

  CAD$ 259.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: IP23150

  Brand: Scootertuning.ca

  

  Manual Choke set Dellorto (PHBG 19-21mm)

  You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables.

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 56.99 Out of stock

  Reference: MF03.030

  Brand: Motoforce

  

  key Ignition Switch Motoforce (Pre-bug Zuma)

  Complete lock set for lost keys, or defective. Cheaper alternative to original items. These lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.

  CAD$ 56.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: STR-245.70/

  Brand: Str8

  

  Bracket STR8 for mirror M8

  Mirror mount now available from STR8 for downhill handlebars. Allows for mounting all mirrors with M8 thread size to your downhill handlebar or any other handlebar without brackets.

  CAD$ 24.99

  More

  In stock

  Add to Compare
• 

  CAD$ 26.99 In stock

  Reference: ST-ADM001/BK

  Brand: Adelin

  

  4-Piston Brake Caliper Adaptor Adelin Black for 220mm Disc Honda Ruckus / Dio / Elite

  We offer here Adelin Brake Caliper adaptor for use 4-piston caliper with 220mm disc brake. Work with Adelin, Stage6 & Voca 4-pistons Caliper.

  CAD$ 26.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: 243.022

  Brand: Polini

  

  Torque Spring Polini Honda Ruckus 50

  Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: IP10979

  Brand: Scootertuning.ca

  

  Intake 21mm Minarelli Horizontal

  Very low-cost replacement intake manifold, 21mm carb connection just like the original one. 

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 Out of stock

  Reference: 328087

  Brand: Tun'R

  

  Air filter Tun'r KN style 90° (28-35mm) Blue

  Tun'r conical air filter with type KN structure of oiled cotton. (28-35mm connection)

  CAD$ 14.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: YA-S001

  Brand: Yasusu

  

  Shock absorber Yasusu T1 Black (245mm)

  High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: 339780

  Brand: Malossi

  

  Malossi sticker set

  A large A3 sticker set from Malossi with different stickers like the Malossi Lion, MHR logo etc

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 48.99 In stock

  Reference: SCT-TC190/PWK

  Brand: TRS

  

  Throttle Cable 78'' 90° (Original Throttle to PWK-CP-PHBG)

  78 inch black throttle cable measured from bend to bend. adjuster cable built into cable. see pics for all the details. tested and made in the u.s.a. don't forget to lube all cables with cable lube, wd-40 , or oil. all cables come dry and should always be lubed.

  CAD$ 48.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: 451581

  Brand: Tun'R

  

  (2X) Indicator Light Tun'r Raindrop Double Black

  Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 116.99 Out of stock

  Reference: 3413034

  Brand: Malossi

  

  Piston Malossi MHR Big Bore 86cc 13mm Minarelli / Piaggio

  Replacement piston for the Mhr Bigbore 86cc cylinder kits

  CAD$ 116.99

  More

  Out of stock

  Add to Compare
• 

  CAD$ 5.99 Out of stock

  Reference: MF12.00001

  Brand: Motoforce

  

  Spark plug connector Motoforce plastic 90deg (Removable Tip)

  High-quality spark plug connectors and cables. Both connectors have 90deg angle and are made of rubber or plastic

  CAD$ 5.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 106.99 In stock

  Reference: IP10971

  Brand: Scootertuning.ca

  

  Crankshaft Standard 10mm Minarelli horizontal

  Good quality aftermarket crank for horizontal 50cc Minarelli AC and LC engines. The crank is a 100% match to the original and is an great aftermarket item. Also a good everyday choice for lightly-tuned 50cc sports engines. Crank requires 10mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of bearings and oil...

  CAD$ 106.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: 668102B

  Brand: Malossi

  

  Small end bearing MHR TEAM 12mm (12x16x16mm)

  This new small end bearing has been designed specifically for the MHR Team crankshaft.

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 159.99 Available in 4-20 days

  Reference: 5111597

  Brand: Malossi

  

  Variator Malossi Multivar Piaggio 50cc 4T

  When the technology makes the difference. Multivar : the sport transmission with the racing acceleration that can't be beat! A jewel to mount on your scooter. Too bad it can't be displayed, it is so perfect! Designed by engineers with great experience, produced entirely in the Malossi factory, utilizing robots with the highest precision. Include 19x15.5mm...

  CAD$ 159.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 12.99 Out of stock

  Reference: 482337

  Brand: Tun'R

  

  Air filter Tun'r KN style 90° (28-35mm) Carbon

  Tun'r conical air filter with type KN structure of oiled cotton. (28-35mm connection)

  CAD$ 12.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 22.99 Available in 4-20 days

  Reference: 343.0019

  Brand: Polini

  

  Cable choke adapter Polini (PWK / CP)

  For those models, where it is difficult to get to the choke lever of the PWK carburettors from Motoroforce, this adaptor allows for converting to choke cable. We recommend using a fitting choke cable from Stage6 or Polini.

  CAD$ 22.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 58.99 Out of stock

  Reference: 1200-1244.10

  Brand: NCY

  

  Front Pulley NCY Aluminium Honda Ruckus (Drive Face)

  Light-weight performance drive face for the Honda Ruckus. Squeeze out a few more RPM by slightly reducing your rotational mass. Physics! Weighs 73 g (1 oz less than stock!)

  CAD$ 58.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 4.99 Out of stock

  Reference: 15500

  Brand: Scootertuning.ca

  

  Clutch Nut (Jaw size) M28x1mm

  39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

  CAD$ 4.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 64.99 In stock

  Reference: SCTFR022

  Brand: Scootertuning.ca

  

  Right Side Cover Yamaha Bws/Zuma 02-11 White

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 64.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 19.99 In stock

  Reference: BZA30418

  Brand: Scootertuning.ca

  

  Fuel Tap (Petcock) Pre-Bug Zuma / Bws'r

  Vacuum controlled petrol cock / fuel tap for MBK Booster and Yamaha BWs scooters. Faulty fuel taps often lead to starting and running problems due to lack of, or too much fuel. Always best to replace the whole unit to solve the problem.

  CAD$ 19.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: MF60.16616

  Brand: Motoforce

  

  Rear Drum Cable Spring Motoforce

  We can offer you these inexpensive replacement brake parts for scoots with brake drum at the rear, which are usually hard to come by.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 Out of stock

  Reference: SCT-KY

  Brand: Scootertuning.ca

  

  Keyring Scooter Tuning

  Beautifully crafted Scooter Tuning rubber keyring with the well-known Scootertuning.ca Logo now available. It's also a pretty cool present. Dimensions: 3in x 3/4in

  CAD$ 2.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 38.99 In stock

  Reference: MOT104041

  Brand: Motul

  

  Motul 2T Oil 800 Factory Line 100% Systhetic (1L)

  100% Synthetic 2-Stroke motorcycle racing lubricant developed for Factory Teams. 800 Factory Line lubricant takes advantage of the ESTER Core® Technology to ensure you maximum power output of the engine without compromising the reliability and the wear. By selecting esters over other high performance synthetic base stocks and combining them with an...

  CAD$ 38.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 111.99 In stock

  Reference: S6-5516600

  Brand: Stage6

  

  Clutch bell Stage6 WingCooler reinforced 107mm Minarelli

  The Stage6 WingCooler clutch bell - a strengthened clutch bell with patented cooling concept. The air flows through the side fins and the enlarged drills to the clutch lining. This results in longer life for the clutch and reduced clutch slip when the engine is warm. The bell's temperature will be considerably lower, which leads to less waste energy and...

  CAD$ 111.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 62.99 Out of stock

  Reference: S6-35035

  Brand: Stage6

  

  Air filter Stage6 Double-Layer SMALL (28-55mm)

  A small 2-layer Racing air filter from Stage6, exactly like you know it from the Scooter Attack Dragster and the Stage6 Racing Zips at the IDSM. Very good air flow and high filtering effect due to two overlapping foam layers with different porosities. Included in this kit are adaptors for nearly all common sizes (28mm, 35mm, 42mm, 45mm, 49mm, 55mm).

  CAD$ 62.99

  More

  Out of stock

  Add to Compare
• 

  CAD$ 4.99 Out of stock

  Reference: NK900.84

  Brand: Naraku

  

  Variator Star washer Naraku (13mm)

  Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all horizontal and upright Minarelli engines.

  CAD$ 4.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 13.99 In stock

  Reference: 0812036

  Brand: Malossi

  

  Spacer kit for MHR Overrange Pulley

  Malossi Minarelli torque corrector spacer set.

  CAD$ 13.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: 203.0097

  Brand: Polini

  

  Air filter Polini Short 30° Black (48mm)

  We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 6.99 In stock

  Reference: BR8ES-3961

  Brand: NGK

  

  Spark plug BR8ES (Solid Tip)

  The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...

  CAD$ 6.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: S6-G6

  Brand: Stage6

  

  Variator Roller weights Stage6

  Stage6 launched a new series of HQ CVT weights. The high quality jacketed precision weights were developed and tested under the most demanding track conditions. The result are durable roller weights made of highly resistant plastic. Depending on the weight and size, the weight insert can be made of aluminum, copper or plastic (orange). The Stage6 weights...

  CAD$ 17.99

  More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: 298740B

  Brand: Malossi

  

  Clutch Spring Malossi White 1.6K (Soft)

  Clutch springs for sport & racing clutches. Harder clutch springs result in clutch engagement at higer revs (and therefore higher power development) and gives much better acceleration from standstill.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare