No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Polini also offer a two-part intake...
Viewed products
With this 70cc version, Malossi offers a...
Athena offers a complete range of components...
Piaggio 50cc Air Cooled cylinder head gasket.
View larger
With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an easy-to-adjust, strong sport cylinder. It can also be used with the original carb, as long as the jetting is adjusted. Performance 9 - 10.5 hp. (10mm gudgeon pin)
4 Items
In stock
| Engine Type | Minarelli Vertical |
| Piston Pin | 10mm |
| Stroke | 39.2 |
| Displacement | 70cc |
| Conrod Length | 80mm |
Reference: BR9HS-4522
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: 346172
Brand: Malossi
Replacement piston for the Malossi sport 70cc cylinder kits
Teknix Center Stand for Minarelli Vertical engine. Harware include.
High quality silver small end bearing from Stage6. The best bearings...
Clutch springs for sport & racing clutches. Harder clutch springs result in...
Please note that you will need 1 resistor per side.
Not only is this Millenium ignition unit from the renowned manufacturer MVT...
Renforced Gearbox bearing set for Yamaha Bws/Zuma 50F. The kit is made of SKF...
Reference: 166.0074
Brand: Polini
The Polini Sport 70cc is a very durable high-performance cast iron cylinder...
Reference: KT00088
Brand: DR
Looking for a bargain-priced durable cylinder for everyday use? If you are...
Reference: 9931370
Brand: Top performances
The Black Trophy is Top Performance’s successor to the Trophy cylinder...
Reference: 9930000
Brand: Top performances
Even though made of cast iron, the Top Performances 70cc Cast Iron "Racing"...
Reference: S6-7216801
Brand: Stage6
10mm Gudgeon pin) With the 70cc Streetrace grey cast iron cylinder series,...