No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
Show your color! All new Scooter...
Reference: TH16AGY6-58508
Brand: Scootertuning.ca
Piston kit for the 160cc GY6 cylinders. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.
Reference: GY6-pis63-f
Brand: Taida
Taida Forged Piston kit (63mm / 180cc-205cc) 4-stroke for GY6 Engine.
Reference: GY6-pis63
Brand: Taida
Taida Piston kit (63mm / 180cc-205cc) 4-stroke for GY6 Engine.
Reference: GY6-ring67
Brand: Taida
Taida Piston rings (67mm / 232cc) 4-stroke for GY6 Engine.
Reference: GY6-ring63-0.8
Brand: Taida
Taida Piston rings (63mm / 180cc) 4-stroke for GY6 Engine.
Reference: GY6-pis67-f
Brand: Taida
Taida Forged Piston kit (67mm / 232cc) 4-stroke for GY6 Engine.
Reference: GY6-pis61
Brand: Taida
Taida Piston kit (61mm / 170cc) 4-stroke for GY6 Engine.
Reference: GY6-2V-28/23
Brand: Taida
Taida Performance Oversize 28/23 vavle set for GY6 125-150cc engine.
Reference: GY6-01054-63cf-75
Brand: Taida
High Quality 205cc Taida Cylinder with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power and the ceramic cylinder with more heat dissipation will help to avoid overheating. The bore is 63mm and need to be used with 66mm stroke crankshaft (205cc). Kit is suitable for all air-cooled 4...
Reference: GY6-01054-58.5c
Brand: Taida
High Quality 160cc Taida Cylinder kit for GY6 125/150cc + engines. The ceramic cylinder coating offer better durability with more heat dissipation and can stand higher temperature. The bore is 58.5mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies)....
Reference: GY6-030820-non
Brand: Taida
Taida Stroker crankshaft with 66mm stroke. This crankshaft is made to use in conjuction with Taida 67mm cylinder (232cc) and Taida 63mm (205cc). Attention! Studs and Chain not include.
Reference: 1118718B
Brand: Malossi
Reference: 3118679
Brand: Malossi
The most powerful thermal unit ever produced by Malossi: over 32 HP at 14,000 RPM. With its large displacement and flanged design, this kit is exclusively for liquid-cooled scooters. Specifically designed for top-level racing, it features the latest evolution of Malossi’s iconic 7-port technology. The standout feature is the support provided to the main...
Reference: S6-9616623
Brand: Stage6
It is a classic racing exhaust made of carefully hand-welded thin steel sheet cones, made in Italy. As is normal for high-end systems, the exhaust has a so-called racing finish, which means the body is unpainted and untreated. We recommend to apply grease spray regularly to avoid premature rusting. The exhaust comes with a high quality carbon silencer....
Reference: FMF-SHGY6
Brand: FMF
We offer here Custom FMF Exhaust with Stainless header. Comes with all mounting hardware, Directly designed for GY6 engine with Fatty 7-8'' wheel.
Reference: 4514760
Brand: Malossi
An aggressive line of aerodynamic and protective screens perfectly interchangeable with the originals, made with a superior acrylic PMMA material. Computer Aided Designed utilising precise dimensions to maximise rider visibility in a race tuck position, a serious race enhancement for your scooter.
Reference: 5519599B
Brand: Malossi
We suggest to use the O2 controller to further optimize both carburetion and performances in transistors. In latest generation motorcycles, thanks to lambda sensor, the CDI can rectify the fuel quantity to be injected in order to reach a constant carburetion even in Closed Loop area. The O2 controller permits to totally control the carburetion as to...
Reference: 2914024.Y0
Brand: Malossi
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application
Reference: 140.0207
Brand: Polini
Only one year after having introduced the Evo 3, Polini already presents a new version. The basic features have been kept: coated aluminium cylinder with T-shaped exhaust port and 6 transfer ports, all in a proven design. The exterior, however, has been completely revamped, with a round shape and side cooling pockets. The cylinder comes with a one-piece...
Reference: 9931270
Brand: Top performances
The Black Trophy is Top Performance’s successor to the Trophy cylinder series. The cylinders have been modified only slightly; quality and scope of delivery are similar. The Asso piston, however, is now partly molybdenum-disulfide-coated, which improves running smoothness and performance while minimising friction and thus heat development. This set-up...
Reference: TRS-CAI2022
Brand: TRS
We have worked with PSP to help design a short ram air intake system for 3rd generation 2022+ Honda Grom 125! Direct bolt-on intake system that will allow your Grom 125 / MSX 125 to breathe! Built-in air snorkel that will help increase airflow! The PSP Short Ram Intake retains the OEM IAT sensor so that?ll get the most accurate reading. It also...
Reference: HL-009
Brand: Hotlap
Just like seen on the Honda Ruckus, Hotlap came out with a Dual Slip-On exhaust with an optional Header to flow with the lines of the Honda Grom. It has the signature HotLap quality, but also looks really unique in general. These pipes all perform with a nice deep growl! This pipe is compatible with the stock 125cc engine; and also capable of performing...
Reference: NG1433
Brand: NG
NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All discs are TÜV Rheinland certified and road legal and come with federal operating approval. OEM-version matches the original item, but some models may vary.
Reference: 4516054
Brand: Malossi
A fashion line of aerodynamic and protective screens perfectly interchangeable with the originals, made with a superior acrylic PMMA material. Computer Aided Designed utilising precise dimensions to maximise rider visibility, a serious race enhancement for your scooter.
Reference: VC19878
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x25mm. For rear brake use on the Derbi Atlantis, Gilera and Piaggio models).
Reference: 2916464.Y0
Brand: Malossi
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application.
Reference: 274235.C0
Brand: Malossi
These are reed valves designed with flow corner and with calculed capacity section. The petals are made of a material composed of karbonit and carbon. They are manufactured with advanced production processes and with the use of raw materials carefully selected. These reed valves are designed for racing engines and they have been tested directly on race...
Reference: MF25.12507
Brand: Motoforce
The strong point of this affordable Motoforce cylinder is that it’s made of aluminium and equipped with a hard Nikasil-coated liner – the way you usually know it only from expensive tuning cylinders. The cylinder is in the same performance range as the original part. Comes with piston, gasket set and – for liquid-cooled cylinders – with head
Reference: 3113025
Brand: Malossi
This aluminum cylinder with coated piston path of Malossi offers a volume of 153 cc (58 mm Bore). The result is a significant increase of performance with a better improvement in acceleration. The exceptionally high quality finish ensures long life. The cylinder is supplied with piston, piston rings and gaskets, but without a head.
Reference: 204.0940/A
Brand: Polini
Replacement piston for the 79cc 4V Polini cylinder kit. Delivered as shown with piston rings, gudgeon pin and circlips.
Reference: 2F-PACK-90cc
Brand: 2Fast
2fast offers here a ø50mm Racing cylinder engine Minarelli Horizontal liquid Cooled. The 2Fast the best high-end 90cc cylinder on the market, a must! 6 aluminum cylinder transfers Barete exhaust, cylinder head stud ... very heavy! Of course, we recommend a racing exhaust, an inner rotor ignition and a big carburetor. Attention! 45,8mm stroke crankshaft...
Reference: RST.H21.20
Brand: Roost
Replacement gasket set for the Roost Havoc 100cc cylinder kit (Piaggio).
Reference: T992153A
Brand: Top performances
Replacement piston for the TPR 70cc for piaggio engine.
Reference: 209.0408
Brand: Polini
This is the complete gasket set for Polini evolution 50cc cylinders. Check the picture to see which gaskets are included.
Reference: 1115391B
Brand: Malossi
Replacement gasket set for Malossi Testa Rossa 70cc Minarelli Horizontal LC Cylinder
Reference: MXS06139050
Brand: MXS Racing
Replacement piston ring for the GP90cc 70cc cylinder kit.