No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
For Fit exclusively with Force...
Reference: U-017
Brand: Scootertuning.ca
Replacement Rotor for the MVT Digital Direct and Premium ignition
Reference: 3216582
Brand: Malossi
Designed to complete an optimal engine thermodynamic cycle, defined at the test bench and tested on rough road paths with strong slopes. Made of mild steel sheet, internally covered with soundproofing materials, featuring a reinforced “chicane”, epoxy-coating and aluminium die-cast heat shield.
Reference: 250.028
Brand: Polini
Maxi Speed clutch bell from the Polini Evolution range for Piaggio 125-300cc maxi scooters. The clutch bell is CNC machined from one piece so that bell 100% runs smoothly and no balancing required. The bell has very large ventilation openings which reduce the temperature again and give the clutch an aggressive look. Overall a very successful clutch bell...
Reference: 249.060
Brand: Polini
Polini Maxi Speed clutch for 200, 250 and 300cc Piaggio 4 stroke engines. This clutch features great design together with lightweight clutch blocks and reinforced friction plates. Altering the speed at which the clutch engages means the engine can be made to rev higher before the power comes in. This means greater drive, better performance on hills,...
Reference: 249.025
Brand: Polini
Polini Maxi Speed clutch for Piaggio maxi scooter engines. This clutch features great design together with lightweight clutch blocks and reinforced friction plates. Altering the speed at which the clutch engages means the engine can be made to rev higher before the power comes in. This means greater drive, better performance on hills, everyday use and...
Reference: 5114065
Brand: Malossi
Malossi's engineers fine tuned the New Generation Mutivar 2000 MHR variator. This new variator provides racing performance for your vehicle and is a valid alternative to the previous Sport-Touring version. The variator is supplied with two different roller sets in order to change the number of revolutions of the gear curve of your vehicle perfectly...
Reference: VC23673
Brand: Scootertuning.ca
Water pump repair kit for Honda FES Pantheon 125/ 150, SH Scoopy 125/ 150, NES @ 125/ 150 as well as SES Dylan 125/ 150 Maxi-scooters. All pictured parts included.
Reference: VC30848
Brand: Dayco
Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: VC24935
Brand: Bando
Top quality Bando drive belt from a world-leading manufacturer for scooters, quads or ATVs. Suitable for various 125, 150 and 200cc maxi-scooters and replaces OEM-No.: 23100KEC4900 / 51700700 / 00127785. Size: 781-20-30
Reference: 241.690
Brand: Polini
he Polini Maxi Hi-Speed variator is one of the strongest variators for Maxi scooters on the market. Emphasis has been placed on the construction of the roller tracks which utilise the existing power band of the engine providing an increase in torque. Variator provides increased acceleration and little more top end speed. Polini variators are excellent...
Reference: 01-00553
Brand: IRC
IRC Tough Tires for smaller machines. GS-45s are original equipment on the HONDA CRF80 & CRF100 and the KAWASAKI KLX110.
Reference: 01-00555
Brand: IRC
IRC offer here the best tire choice for Pee Wee racing with OEM approved.
Reference: W893.603025
Brand: Wurth
Also known as ''Green Loctite''. This one is used to increase the press-fit of 2 items.
Reference: BT16634
Brand: Scootertuning.ca
Crankcase cover for all vehicles with 12-13” wheels or larger and 4-stroke GY6 139QMB engines. These wheel sizes generally take a 788mm v-belt. Colour: silver, supplied as shown.
Reference: BT13921
Brand: Scootertuning.ca
Float bearing pin.
Reference: BT20812
Brand: Scootertuning.ca
Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean. Needle is 4cm long.
Reference: NK100.84
Brand: Naraku
This piston ring set for 72cc GY6 cylinders (47mm bore) is specially manufactured for the 72cc Naraku 4-stroke cylinder (NK100.47).
Reference: BT13938
Brand: Scootertuning.ca
Complete original quality aftermarket 47mm piston for 72cc cylinders. Delivery as shown. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pin circlips.
Reference: GY6-agas70-57-6
Brand: Taida
This cylinder spacer kit make it possible to use 150-232cc cylinder with stroker crankshaft and to adjust the correct piston height in the cylinder head.
Reference: GY6-gas62-54
Brand: Taida
Taida Gasket set for 175cc cylinder kit (62mm)
Reference: GY6-pis67
Brand: Taida
Taida Piston kit (67mm / 232cc) 4-stroke for GY6 Engine.
Reference: NK600.06F
Brand: Naraku
Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more durable and minimises friction. The raised piston skirt ensures a tighter fit.
Reference: GY6-01054-63cfh-4V
Brand: Taida
Attention! Only for taida 4V Head! High Quality 180cc Taida Cylinder with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power and the ceramic cylinder with more heat dissipation will help to avoid overheating. The bore is 63mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco...
Reference: GY6-2V-28/23
Brand: Taida
Taida Performance Oversize 28/23 vavle set for GY6 125-150cc engine.
Reference: GY6-06054-63
Brand: Taida
High Quality 205cc Taida Liquid Cooled Cylinder kit for GY6 125/150cc + engines. The bore is 63mm and need to be used with 66mm stroke crankshaft (205cc). Kit is suitable for all liquid cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). Attention! Boring required and this kit...
Reference: GY6-01054-63FH
Brand: Taida
High Quality 180cc Taida Cylinder kit with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power but more heating. The bore is 63mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies)....
Reference: VCR-SD960/AL
Brand: Voca
The new handlebar-clamps VOCA Racing 22-28 allow to easily change from 22mm to 28mm handlebars. Ultra light design, aggressive look and high quality aluminium – that’s what describes best the new VOCA handlebar-clamps. The complete set includes two handlebar-clamps which are fitted with M8 screws. The measures between the drillings are 34,80mm and...
Reference: TRS-PSPEXH/FATTY
Brand: TRS
The PSP Stainless Steel Exhaust with Carbon Fiber Tip Complete has undergone rigorous testing against the Yoshimura Exhaust, and it has been found to offer a 2 MPH gain in performance at a fraction of the cost. In collaboration with PSP R&D, this exhaust system has been optimized to offer the best performance on the Ruckus market, surpassing competitors...
Reference: TBR-T002-F
Brand: Two Brothers Racing
Reference: RH-038
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Several design available!
Reference: 5514747
Brand: Malossi
We suggest to use the O2 controller to further optimize both carburetion and performances in transistors. In latest generation motorcycles, thanks to lambda sensor, the CDI can rectify the fuel quantity to be injected in order to reach a constant carburetion even in Closed Loop area. The O2 controller permits to totally control the carburetion as to...
Reference: 2514227
Brand: Malossi
Antifriction fifth wheel for variator contrast spring. We have considered both on theoretical and practical basis all the existing fifth wheel systems: balls, rollers and radial sliding fifth wheels of metal type. All the tests gave unsatisfactory results. We have made prototypes with alternative systems, metallic type, without any positive results. Only...
Reference: VCR-PB555
Brand: Voca
Voca offer here Wheels replica of the well-known Mobster. The 5 Spokes ultralight wheels are made of aluminum alloy. Front Size: 12x2.50 / Rear: 12x3. Does not come with mounting bushing, must be ordered separalty!
Reference: VCR-RD13PB-ET03
Brand: Voca
Slide spring for VOCA Racing PB carburettors.
Reference: VCR-RD50201.01
Brand: Voca
Voca offers here replacement Silencer for Voca Tomahawk 4T exhaust.
Reference: RPR-STKGC/AA
Brand: rPRO
Step-Tone series is our latest brainchild in our line of billet parts. Offering assorted anodized colors with two-tone combinations, gives the end user a more creative color palette to work with, thus achieving the best color scheme possibilities for their builds.