No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement Piston for the Stage 6 Streetrace 70cc Minarelli Vertical
This Low Down Shock is constructed of an anodized black billet body,...
BLACK SERIES is The Two Brothers...
Reference: 482014
Brand: Doppler
Doppler offers here the clutch bell SX86 directly developed for the clutch of the same name. The bell have diameter of 107mm. It will fit on the Minarelli Vertical engines (Booster,Zuma 02-) and Horizontal (Bws,zuma). Developed, tested and approved by the Doppler team.
Reference: SCT-RBC/BWS0211
Brand: Scootertuning.ca
Brake cable for the rear brake. Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted.
Reference: 031381B
Brand: Malossi
Clear fuel filter made of special hydrocarbon resistant plastic with nylon micromesh filter element.
Reference: SCTFR012
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: SCTFR003
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: MAL003
Brand: Malossi
Individual stickers with the well-known Malossi logo, available in different sizes.
Reference: DC32354
Brand: Dayco
Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: 166.0093
Brand: Polini
The Polini Sport 50cc is a very durable performance cast iron cylinder meant for everyday use. This kit is known for its impressive top speed considering the category it belongs to, even more for its excellent performance at low and mid rpm range. It can be used with the original carburetor. Attention! Requires a long reach spark plug. (OEM doesn't work)...
Reference: 1200-1250.5
Brand: NCY
NCY Minarelli torque corrector.
Reference: NK901.13
Brand: Naraku
Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have higher compression. The starter motor freewheel has a metal securing ring (see image 2) and this prevents the winder drum from coming off the clutch. This ring should be removed before fitting the starter sprocket!
Reference: S6-35002RO
Brand: Stage6
These racing air filters from Stage6 feature a low-porosity foam for optimum filtering characteristics and are available in red, blue and yellow. They have a fitting diameter of 35mm, which fits all 12-21mm Dellorto and Arreche carburettors, and come in two lengths: 7 cm and 20 cm. The longer ones offer better air flow but may be too long for your scooter...
Reference: 472612
Brand: Tun'R
Hot stuff: clear lens tail light with beautiful reflector. Comes with bulb and everything, just wire up and go.
Reference: VC19856
Brand: Scootertuning.ca
Replacement orange 12V 10W indicator bulb with BA15S fitment, suitable for indicators using clear lenses. Please compare item specifics with your current bulb for compatibility.
Reference: 245.014
Brand: Polini
Single set of Polini clutch springs. Tuned engines usually reach their maximum power only higher up the rev range, the engine will suffer from a loss of power at low revs though, resulting in slower acceleration. Polini offers this set of clutch springs in different strengths for stock clutches to bridge the gap in the power band.
Reference: 263947
Brand: Doppler
High-quality full-circle crankshaft from Doppler. With this S1R, we can offer you a good crankshaft at a very fair price. The crankshaft is ideal for all sport engines. Furthermore, the conrod has oil holes for the small end bearing.
Reference: 318437
Brand: Malossi
(10mm Gudgeon pin) The MHR Replica is a 70cc aluminium racing cylinder comparable in performance to Polini Corsa. As the MHR Replica is made of aluminium, which dissipates heat better than cast-iron, it has much better thermal properties than the Corsa though. In order to ensure sufficient inner cooling and to achieve good performance, we recommend at...
Reference: BM010100
Brand: Scootertuning.ca
Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!
Reference: 5111852
Brand: Malossi
The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package is a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wider range. Include 16x13 6g roller.
Reference: S6-72166ET09
Brand: Stage6
This is the complete gasket set for Stage6 Streetrace cylinders. Check the picture to see which gaskets are included.
Reference: 27793
Brand: Scootertuning.ca
Gear box cover gasket suitable for Minarelli engined scooter models.
Reference: BM03259
Brand: Scootertuning.ca
Replacement complete front caliper for Bws, PGO & Genuine Scooter.
Reference: 241.773
Brand: Polini
Latest variator technology from Polini for untuned 50cc engines for improved acceleration and higher top speed. Polini “Evo-sliders” make for better power transfer and shifting. No additional tuning required, so a great option for untuned scooters. With untuned scooters, all the parts supplied must be fitted and additional fine-tuning is required....
Reference: YA-S005
Brand: Yasusu
High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.
Reference: 482349
Brand: Teknix
This is the Teknix replacement torque corrector for minarelli crankcase. Part number for the bearing kit inside the torque corrector: 2011754.
Reference: IP24492
Brand: Scootertuning.ca
These stylish LEDs are the perfect accessory for upgrading any scooter, motorcycle and ATV, with 10mm thread (mounting also required a 10mm hole) Set contains two individual indicators. To ensure proper LED function, we recommend an LED indicator relays. 68mm in length (measured from fairing).
Reference: 1100-1450.10
Brand: NCY
The NCY black kickstart lever for the Honda Ruckus and many Chinese 50cc scooter engines. Finally, a kickstart lever that is classy enough to bring home to Mom.
Reference: STR-658.15
Brand: Str8
Hot stuff: clear lens tail light with beautiful reflector. Comes with bulb and everything, just wire up and go.
Reference: 202.1370
Brand: Polini
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed.
Reference: MF81.107
Brand: Motoforce
The Motoforce Racing has lighter clutch shoes, which leads to engagement at higher revs, thus providing better acceleration. If you want the clutch to engage at even higher revs, all you have to do is to choose stiffer springs (available separately).
Reference: 353-0578
Brand: Maxima
Premium quality low-smoke 2-cycle engine lubricant for both premix and oil injector use in scooters and mopeds. Clean burning while providing excellent protection to all engine parts. Exceeds API-TC and all manufacturer's specifications.
Reference: PG794
Brand: Pro grip
Progrip is well known for manufacturing high-quality grips and protective clothing. With the MX Fluo design, Progrip now offers a grip in a classical shape in the neon-coloured Motocross style. Ideal for all common downhill handlebars as well as all other handlebars. Diameter : 22/25mm. Length : 115mm
Reference: SCT-REV001
Brand: Scootertuning.ca
External battery powered. Can read up to 19900RPM, and record the max RPM. Blue indication. Works with any 2 stroke or 4 stroke engine. Dimensions; 67.1mm x 35mm x 17.6mm. Comes with english instructions.
Reference: SCT-EXB100-1
Brand: Scootertuning.ca
Replacement exhaust with EGR system. This exhaust offer a slightly better performance than the original. The peak power is similar to a Malossi Wild lion. Must re-use OEM screws, only a replacement gasket is included.
Reference: S6-35021
Brand: Stage6
A big 2-layer Racing air filter from Stage6, exactly like you know it from the Scooter Attack Dragster and the Stage6 Racing Zips at the IDSM. Very good air flow and a high filtering effect due to two overlapping foam layers with different porosities. Included in this kit are adaptors for nearly all common sizes (28mm, 35mm, 42mm, 45mm, 49mm, 55mm).
Reference: 90508-32768-00
Brand: Yamaha
Replacement OEM Yamaha parts.