Top sellers

• 

  CAD$ 349.99 In stock

  Reference: 6111121

  Brand: Malossi

  

  Rear pulley Malossi MHR Overrange 2005 ATV-DRR-APEX

  New version since November 2006. This is the complete rear pulley from the Malossi Hyper Racing (MHR) series. Contrary to the old version, this one comes with both halves manufactured by Malossi and can simply replace the original pulley.

  CAD$ 349.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 199.99 In stock

  Reference: 201.0168

  Brand: Polini

  

  Carburettor Polini Pwk 28mm

  Polini carburetors are lodged a flat slide lightweight chrome alloy, highly resistant to abrasion and wear, which improves slip. Polini carburetors allow more efficient to have every rpm benefits. Providing better acceleration and recovery, also improving the extension at maximum speed and optimizing the power output. They provide a simple adjustment with...

  CAD$ 199.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 8.99 In stock

  Reference: NK101.86

  Brand: Naraku

  

  Cylinder Head Nuts M7x1mm Naraku (Minarelli)

  M7 threaded cylinder head nut, set of 4. 13mm long with collar. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines with M7 cylinder studs. The nuts can of course be used for other purposes.

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 27.99 In stock

  Reference: 372.0003

  Brand: Polini

  

  Pilot Jets Polini PWK 30-40

   Polini set carburetor idle jets suitable for Keihin PWK carbs.

  CAD$ 27.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 65.99 In stock

  Reference: 1000-1263.10

  Brand: NCY

  

  Front Wheel Axle NCY Electroplated (12x250mm) Honda Ruckus / Dio / Elite

  Electroplated front wheel axle by NCY for Ruckus. . Has safety wire / cotter pin provisions (2mm)! Dimension : 12mm X 250mm. Attention, does not fit OEM forks!

  CAD$ 65.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 Out of stock

  Reference: KW13985

  Brand: Scootertuning.ca

  

  Reed Valve Replacement Minarelli Horizontal

  Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines & CPI, Keeway, Vento.

  CAD$ 16.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: BM00592

  Brand: Stylepro

  

  Front Pulley Stylepro Racing (Genuine / PGO)

  High performance front pulley made by stylepro Racing for PGO and Genuine Scooter.

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 199.99 In stock

  Reference: 201.0166

  Brand: Polini

  

  Carburettor Polini Pwk 24mm

  Polini carburetors are lodged a flat slide lightweight chrome alloy, highly resistant to abrasion and wear, which improves slip. Polini carburetors allow more efficient to have every rpm benefits. Providing better acceleration and recovery, also improving the extension at maximum speed and optimizing the power output. They provide a simple adjustment with...

  CAD$ 199.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 239.99 Out of stock

  Reference: S410130320005

  Brand: Athena

  

  Crankshaft Athena Racing HPC 10mm Minarelli Horizontal

  High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. The perfect part for all sports and Midrace cylinder.

  CAD$ 239.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 41.99 Product available with different options

  Reference: P10788

  Brand: Replay

  

  Downhill Handlebar Replay 625mm

  CAD$ 41.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 13.99 In stock

  Reference: MF33.00020

  Brand: Motoforce

  

  Small end bearing Motoforce 10mm (10x14x13mm)

  Replacement small-end bearing from Motoforce. It can be used not only in Motoforce crankshafts, but is also ideal for original crankshafts. Size:10x14x13mm (Minarelli, CPI E1)

  CAD$ 13.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 3.99 Out of stock

  Reference: MF96.90012

  Brand: Motoforce

  

  Cylinder studs Motoforce M7x106mm

  These high-quality stud bolts from Motoforce are now available for Minarelli and Piaggio. Perfect if you want to build a new engine or want to replace oxidized stud bolts.

  CAD$ 3.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 48.99 In stock

  Reference: T9907770

  Brand: Top performances

  

  Drive belt Top Performances Minarelli Long

  Best quality made by Bando to TopPerformances' specification, on our dyno this one here proved better than any other product in terms of performance.

  CAD$ 48.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 48.99 Product available with different options

  Reference: S6-SSP367

  Brand: Stage6

  

  Riser Kit Stage6 CNC 40mm Minarelli

  Stage6 is the first manufacturer to offer a homologated riser kit that is allowed on public roads. The riser kit has been CNC-machined from solid aluminium. It raises the rear end by 40mm so that the front is lower than the rear. The riser kit can be mounted within a few minutes. It will simply be bolted between the engine block mount and the shock...

  CAD$ 48.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 159.99 In stock

  Reference: S802-343/AL

  Brand: Ruckhouse

  

  Rear Hub Multi Bolt partern Aluminium 4x102, 4x110, 4x130 GY6 125-150cc

  Looking to run a fatty rim on a Honda ruckus with GY6 motor? here's the hub you need. The hub has 4x102, 4x110 & 4x130 bolt pattern that allow to use lot's of Douglas & Aftermaket 12x8 / 12x7 wheels.  4x102 Bolt pattern is already including studs. We recommend our lug nuts to install the wheel. 4x110 and 4x130 Can be used with Regular M10 bolts...

  CAD$ 159.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 27.99 In stock

  Reference: 372.0004

  Brand: Polini

  

  Pilot Jets Polini PWK 42-52

  Polini set carburetor idle jets suitable for Keihin PWK carbs.

  CAD$ 27.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 In stock

  Reference: STR-790.77

  Brand: Str8

  

  Spark-plug connector STR8 (Removable Tip)

  If your spark plug cap is visible from the outside, this is really a cool optical enhancement.

  CAD$ 9.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 In stock

  Reference: STR-560.63/BL

  Brand: Str8

  

  Oil filler screw STR8 New-Style Blue Minarelli

  Anodised oil drain plug in a new style.

  CAD$ 9.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: L-SASTAGE6/BK

  Brand: Stage6

  

  Sticker Stage6 black

  This is the most famous Stage6, the one you definitely can’t do without! Available in black or white writing.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 57.99 In stock

  Reference: 324521

  Brand: Doppler

  

  Air filter Doppler Air System (36mm)

  Very likely to be one of the most advanced airfilters on the market. Doppler has designed a system utilising the so-called venturi effect. What does that mean? The idea is that by reducing the effective flow-area in precisely defined places, one reduces the suction needed to start an airflow. Just think of different straws, one with too small a flow area...

  CAD$ 57.99

  More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: 91810-14807-00

  Brand: Yamaha

  

  Dowel Pin for CVT Cover, Cylinder & Head (Bws/Zuma 50F / 50 2T)

  Yamaha OEM replacement part. Dowel pin used to align the CVT cover.

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 129.99 Out of stock

  Reference: S6-3217500

  Brand: Stage6

  

  Intake System Stage6 MKII 23mm (Dio-Elite)

  Complete intake system from Stage6. Consists of a teflon-coated inlet manifold with oil and vacuum connections, gaskets and the new SportPro (NBR) reeds. The big 2-petal reed block, combined with a carburettor of 19mm or more, unleashes much more power than the original 1-petal reed block. The rubber piece can be replaced in order to convert to bigger...

  CAD$ 129.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 5.99 Out of stock

  Reference: P16265

  Brand: Replay

  

  Kickstart Return Spring Minarelli

  CAD$ 5.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 11.99 In stock

  Reference: 99009-15400-00

  Brand: Yamaha

  

  Kickstart Shaft Circlip (Bws/Zuma 2002-2011)

  Yamaha OEM replacement part. Hold the solid bush and the washer plate together.

  CAD$ 11.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 339.99 In stock

  Reference: 537604

  Brand: Malossi

  

  Crankshaft Malossi MHR RHQ 12mm (AF16)

  High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.

  CAD$ 339.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 13.99 Out of stock

  Reference: CR7E

  Brand: NGK

  

  Spark plug CR7E (Removable Tip)

  NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...

  CAD$ 13.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 35.99 In stock

  Reference: 6615509B

  Brand: Malossi

  

  Small end bearing MHR 13mm (13x17x17.7mm)

  This new small end bearing has been designed specifically for the MHR Team crankshaft and the respective BIG BORE cylinder kit with 13mm gudgeon pin diameter, so make sure your scoot uses the respective parts.

  CAD$ 35.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 119.99 In stock

  Reference: 241.490

  Brand: Polini

  

  Variator Polini Hi-Speed (PGO-Genuine)

  These HI-SPEED variators are Polini's newest development. They are of high quality and feature an optimised ramp design. The Polini Hi-Speed offers a combination of improved pull you can feel and a higher top speed. Depending on the model, the kit usually includes a torque spring that prevents belt slip and thus ensures better power transmission. The...

  CAD$ 119.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 Out of stock

  Reference: MF96.90036

  Brand: Motoforce

  

  Exhaust Studs Motoforce M6x1mm (2)

  We can offer you Motoforce exhaust studs in M6x26mm. Depending on the model, it may sometimes be quite complicated to mount an exhaust using conventional M6 bolts. Installing these studs before hand makes things a lot easier.

  CAD$ 5.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 27.99 In stock

  Reference: BM033102

  Brand: Stylepro

  

  Rear Brake Shoes Stylepro Racing (Genuine / PGO)

  Performance rear brake shoes from Stylepro made for PGO and Genuine Scooter.

  CAD$ 27.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 Out of stock

  Reference: STR-560.63/RE

  Brand: Str8

  

  Oil filler screw STR8 New-Style Red Minarelli

  Anodised oil drain plug in a new style.

  CAD$ 9.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 20.99 In stock

  Reference: S6-50ET002

  Brand: Stage6

  

  Clutch Springs for Stage6 Torque Control Medium

  In order to provide a late clutch engagement of the Stage6 Torque Control, there are several possibilities. One of the simplest and also most effective ones is to replace the springs and choose a fitting spring preload. These stiff springs offer a good compromise between clutch engagement at high revs and excellent traction.

  CAD$ 20.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 87.99 In stock

  Reference: 98-119

  Brand: Kenda

  

  Tire Kenda K761

  Chunky, aggressive design for street-oriented dual-sports. Original equipment tires on models from several major manufacturers. Gravel and fire. road performance while maintaining excellent street manners. Long tread life for one of the best value motorcycle tires on the market

  CAD$ 87.99

  More

  In stock

  Add to Compare
• 

  CAD$ 52.99 Out of stock

  Reference: MF81.105

  Brand: Motoforce

  

  Clutch Motoforce Racing 105mm Minarelli

  The Motoforce Racing has lighter clutch shoes, which leads to engagement at higher revs, thus providing better acceleration. If you want the clutch to engage at even higher revs, all you have to do is choose stiffer springs (available separately)

  CAD$ 52.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 13.99 In stock

  Reference: 1414532

  Brand: Malossi

  

  Air filter Malossi Double Red Sponge (Vespa / Piaggio)

  Filter with double layers; the first layer has medium sized micro-pores to capture coarse dirt particles, while the second layer has very fine sized micro-pores to capture microscopic dust particles, the most damaging.

  CAD$ 13.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 19.99 Out of stock

  Reference: P16671

  Brand: Replay

  

  Clutch Bell Replay 107mm Minarelli

  CAD$ 19.99

  Add to cart More

  Out of stock

  Add to Compare