Top sellers

• 

  CAD$ 103.99 In stock

  Reference: 458181

  Brand: Doppler

  

  Handlebar Stem Doppler Long

  Doppler offer here aluminium handlebar stem for 22mm handlebar. Available in a wide color selection.

  CAD$ 103.99

  More

  In stock

  Add to Compare
• 

  CAD$ 8.99 In stock

  Reference: NK100.89

  Brand: Naraku

  

  Gasket set Naraku 50cc Minarelli Horizontal AC

  These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinders, but are also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 103.99 In stock

  Reference: NK200.01

  Brand: Naraku

  

  Carburetor Naraku Racing V3 18,5mm for GY6 50cc

  Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an affordable price. No start issues as with Chinese alternatives and good drive. Prevents flat sports, and allows you to conveniently drain the float bowls. Complete with E-choke and 84 main jet. 18.5mm connection is fine for 4-stroke scooters and mini-quads from 50-90cc with 139QMB...

  CAD$ 103.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 52.99 In stock

  Reference: 28690

  Brand: Scootertuning.ca

  

  Fuel Pump Yamaha Bws/Zuma 50F

  Replacement fuel pump for various Yamaha and MBK maxi scooters, perfect replacement for worn or defective pumps.

  CAD$ 52.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 15.99 In stock

  Reference: 7615375B

  Brand: Malossi

  

  Grease Tube Malossi MHR Racing (40g)

  The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C. MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half...

  CAD$ 15.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 331.99 Out of stock

  Reference: TRS-HRGWH/PSP

  Brand: TRS

  

  Engine Swap Harness PSP Honda Ruckus GY6

  PSP plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go!

  CAD$ 331.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 16.99 Available in 4-20 days

  Reference: 280.0012

  Brand: Polini

  

  Small end bearing Polini 12mm (12x17x15mm)

  Small-end bearings from Polini in different diameters. Please check the size of the original bearing or the gudgeon pin before ordering.

  CAD$ 16.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 26.99 Out of stock

  Reference: ADL-BP001

  Brand: Adelin

  

  Brake pad Adelin 4-Piston

  Replacement Brake pads for Adelin 4-Piston Caliper.

  CAD$ 26.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 33.99 In stock

  Reference: PG0012

  Brand: Stylepro

  

  Main Jet set Stylepro 4mm (100-118)

  We offer here Stylepro 4mm jet set made for PGO and Genuine original carburettor available in different size.

  CAD$ 33.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 Out of stock

  Reference: MF85.107

  Brand: Motoforce

  

  Clutch Standard Motoforce 107mm

  107mm Motoforce clutch in OEM quality, reproduction of the original part. An excellent replacement part !

  CAD$ 44.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: SCT-GA011

  Brand: Scootertuning.ca

  

  Gearbox Cover Gasket (PGO-Genuine)

  Remplacement gearbox cover gasket for PGO and Genuine Scooter.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 99.99 In stock

  Reference: GY16651

  Brand: Scootertuning.ca

  

  Carburetor CVK 24mm for GY6 125-180cc

  Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engines and 125cc air-cooled Kymco models. This is a Chinese-built carb and matches the quality of the original item. Uses M5 main jets.

  CAD$ 99.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 119.99 Available in 4-20 days

  Reference: 347849

  Brand: Malossi

  

  Piston Malossi Sport 70cc 12mm Minarelli / Piaggio / Honda

  Replacement piston for Malossi Sport 70cc cylinder kits.

  CAD$ 119.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 39.99 Out of stock

  Reference: TRS-IA001/AL

  Brand: TRS

  

  Angled Clocking Flange TRS Aluminium for GY6 125-150cc

  Running a forward facing carb, and having problems with how high the carburator sits? Some carbs have a problem when angled too high in the front, and this can cause the engine to not run right, and have problems feeding fuel properly! This flange also turns the carb in more to the center of the bike so that when running a fat tire setup, the carb doesn't...

  CAD$ 39.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 48.99 In stock

  Reference: SCT-164-103

  Brand: Ruckhouse

  

  11 Coil Stator 3 Phase – AC CDI (157QMJ) GY6 125-150cc

  11 Poles Stator for GY6 150cc engine that supply more power as the 8 poles stator include with the engine.

  CAD$ 48.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 43.99 Out of stock

  Reference: MF84.101

  Brand: Motoforce

  

  Torque spring Motoforce RACING set of 3 Minarelli

  white=+1000rpm / black=+1500rpm / blue=+2000rpm. One of the main things necessary to set up a tuned engine is a stronger torque spring. Torque springs are placed behind the clutch to press the rear pulley to the drive belt. If the spring is too weak, the belt will slip and accelerating becomes impossible. Please note that using a stronger torque spring...

  CAD$ 43.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 709.99 Available in 4-20 days

  Reference: 6118884

  Brand: Malossi

  

  Oversize CVT Malossi MHR Overrange La Furia Rossa 2013 Minarelli Long

  Malossi’s overrange kit has been completely revised and now goes under the name of “La Furia Rossa”. The rear pulleys are completely made out of aluminium, minimising weight and also giving a more instant response. They now come with holes for better cooling, and the exterior faces are anodised red. The contact surfaces of the Multivar variator have been...

  CAD$ 709.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: 5113139

  Brand: Malossi

  

  Variator Malossi Multivar GY6 50cc

  Malossi Multivar variomatic for great drive and shifting, as well as increased top end. [computer-optimized running surface] Now available for Chinese 4-stroke scooters with 139QMB and 139QMA engines. Specially developed for 50cc 4-stroke Chinese scooters. Counterpressure spring should be replaced, otherwise the 7g weights are too heavy. We recommend 5.5g...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 18.99 In stock

  Reference: MF15.16800

  Brand: Motoforce

  

  Intake Motoforce (21mm) Minarelli Vertical

  Many stock scooter engines are restricted with an intake manifold. Swapping this with a derestricted manifold will give your scoot better acceleration and higher top speed. If you want to use a bigger carb, going for a derestricted manifold becomes indispensable.

  CAD$ 18.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 61.99 In stock

  Reference: S6-5116600

  Brand: Stage6

  

  Front pulley Stage6 CNC RACING Drive Face Minarelli

  Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...

  CAD$ 61.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 93.99 Out of stock

  Reference: S6-5916627

  Brand: Stage6

  

  Drive belt Stage6 R/T Oversize Minarelli Long

  High-quality oversize racing drive belt with kevlar fibres; excellent performance and, thanks to a unique compound, very good grip. This belt has been developed by Stage6 specifically for Oversize CVT systems and is therefore a great upgrade for the Stage6 R/T CVT system, getting you ready for high-speed racing in circuit as well as sprint races!...

  CAD$ 93.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 79.99 Out of stock

  Reference: 4509000745

  Brand: Scootertuning.ca

  

  Front Brake Disc Yamaha Bws/Zuma (2002-2011)

  Replacement Disc brake for Yamaha Bws/Zuma 50cc 2002-2011.

  CAD$ 79.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 15.99 Out of stock

  Reference: 5PJ-H4144-00-00

  Brand: Yamaha

  

  Headlight Cover (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 15.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 46.99 Out of stock

  Reference: TRS-FBL30

  Brand: TRS

  

  Front Brake Line 28'' TRS With Fitting Honda Ruckus

  Black stainless brake line with chrome straight fitting and 70 degree chrome banjo fitting on other end. Measures 29 inches in total. Perfect fit for those RRGS/Adelin front end kits. don't have excess line showing. really clean look.

  CAD$ 46.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 47.99 In stock

  Reference: 2513056B

  Brand: Malossi

  

  Variator ramp plate Malossi MHR Overange (13mm)

  Replacement parts for Malossi MHR Overrange variator.

  CAD$ 47.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: DEL-53002.78

  Brand: Dellorto

  

  Cable choke adapter Dellorto PHBG (19-21mm)

  You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables. Also included is an adapter for...

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 36.99 Available in 4-20 days

  Reference: 6116889

  Brand: Malossi

  

  Drive belt Malossi X-Special Piaggio Long

  High quality hard wearing belt by Malossi. Sophisticated rubber compound gives best traction.

  CAD$ 36.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 78.99 In stock

  Reference: 462602

  Brand: Tun'R

  

  Front Fairing Tun'r New Design Black Bws'r-Zuma 88-01

  CAD$ 78.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 29.99 In stock

  Reference: 2490

  Brand: Tun'R

  

  Side stand Tun'r chrome (Bws'r / Pre-bug Zuma)

  CAD$ 29.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 13.99 In stock

  Reference: S6-SSP630ET002

  Brand: Stage6

  

  Adapter for mirror Stage6 F1 M10 (right)

  We offer here adaptator for use M8 Stage6 mirror on scooter with M10 mirror thread.

  CAD$ 13.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: S6-0503

  Brand: Stage6

  

  Sticker set Stage6 small

  New Stage6 maxi sticker sheets in Din A2 and A4. Now with Stage6 R/T logo. You can choose between two versions: white for dark surfaces or black for light surfaces; for the smaller set, there is only one colour version.

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 55.99 Out of stock

  Reference: TH05ADIO50-2D

  Brand: Scootertuning.ca

  

  Clutch Bell R-Vent 107mm

  CAD$ 55.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 41.99 Out of stock

  Reference: S6-5916607

  Brand: Stage6

  

  Drive belt Stage6 PRO Minarelli Short

  The Stage6 Pro drive belt is an inexpensive high quality drive belt produced by Bando in Japan. It has optimised grip characteristics that guarantee excellent power transmission.

  CAD$ 41.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 16.99 Out of stock

  Reference: IP32317

  Brand: Scootertuning.ca

  

  CDI Unit Octane 101 Minarelli

  Replacement CDI unit for Minarelli engines. Fits all vehicles with Minarelli horizontal engines and also some Chinese 2-stroke models. Not suitable for vehicles with Ducati ignition system (single Beta & Malaguti models). Please check in advance which ignition system is installed. This CDI can be used as a replacement for the OEM part 3KJ-85540-01.

  CAD$ 16.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 149.99 In stock

  Reference: SCTFR020

  Brand: Scootertuning.ca

  

  Front Cover Yamaha Bws/Zuma 02-11 White

  We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.

  CAD$ 149.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 22.99 In stock

  Reference: S6-SSP140/

  Brand: Stage6

  

  Oil Filler Screw Stage6 Minarelli

  Oil Filler Cap Stage6 Minarelli (e.g. Yamaha Aerox) - stylish colorful anodized oil plug for optimal sealing of the crankcase. Well-sealing oil filler screws are crucial for the operability of the gearbox. The oil plug closes the filler opening of the case, a high-quality O-ring ensures perfect sealing. The oil plugs are made of a high quality aluminium...

  CAD$ 22.99

  More

  In stock

  Add to Compare