No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Super light weight 3.75” round CF...
Viewed products
Complete replacement 24mm carburettor (membrane...
Oil strainer spring for all 50cc GY6 139QMB/QMA...
View larger
Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engines and 125cc air-cooled Kymco models. This is a Chinese-built carb and matches the quality of the original item. Uses M5 main jets.
This product is no longer in stock
| Intake Connection | 26mm |
| Air filter Connection | 42mm |
| Main Jet Type | 5mm |
| Main Jet Size | 105 |
Reference: S6-28DEL5-
Brand: Stage6
Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 5mm main jets will fit 19-21mm Dellorto carburetors. Available in different ranges of sizes.
Reference: 360.00
Brand: Polini
Ideal Kit for adjusting your carburetor. 10 main jets are included in this kit, stored in a neat transparent box. These 5mm main jets will fit 19-21mm Dellorto carburetors. Available in different ranges of sizes.
Reference: TRS-TCS6CVK
Brand: TRS
TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work with other motorcycles or scooters that has the same type of fitting for the carburetor (all Stage 6 or KOSO...
Reference: SCT-114-52
Brand: Ruckhouse
Reference: BT20812
Brand: Scootertuning.ca
Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean. Needle is 4cm long.
Tun'r transmission cover retaining bolts for Minarelli engines. The steel...
These sets contain all the necessary gaskets from the cylinder base upwards....
High Load Torque spring made in Italy by 2Fast. This torque spring is made to...
Piston kit for the Naraku 4-stroke cylinder (NK-600.06), 180cc GY6 original...
Removing the OEM front frame plastics can really leave your Honda Ruckus...
Reference: SCT-CVK24
Brand: Scootertuning.ca
Complete replacement 24mm carburettor (membrane type) supplied with electric...