No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
BLACK SERIES is The Two Brothers...
Reference: S6-5514017
Brand: Stage6
Being CNC-manufactured from one piece, this clutch bell has a very high precision, which raises this part over its conventional, pressed colleagues. The Stage6 R/T CNC Clutch Bells are available in three versions that vary in design and weight; thus it is now possible to influence torque and engine characteristics through the choice of the clutch bell....
Reference: 242.030
Brand: Polini
20g fat Polini for the converter unit and other locations where a heat-resistant lubricant is required. When mounting a transducer disk, it is imperative to use a heat-resistant grease in the area of the guide slots and the shaft.
Reference: TRS-TLFM
Brand: TRS
Looking to run a flush taillight that is high and tight. Look no farther. The TRS FLUSH MOUNT LED uses a quality made in the USA LED Light one of the brightest in the industry. Led light offers run, brake and turn signals in a 6" bar. Offers great visibilty and has a clean 4 rivet install ultilizing the stock wire harness of your ruckus. Recommend using a...
Reference: TRS-BBW523/
Brand: TRS
FINALLY! A Battery Box Washer Kit that fits with the right size bolts and washers. Add that last finishing touch to your project with these all new TRS battery box dress up kit! Each kit includes 4 x 5mm washers, 3 x6mm washers and stainless steel bolts to replace the factory hardware on the Battery Box. Offered in anodized black, red, and raw, these...
Reference: SCTFR011
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: NK901.00
Brand: Naraku
NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best belts in the range. Size: 878-17-28
Reference: S6-5216603
Brand: Stage6
These black-coated torque springs from Stage6 are available in different strengths. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can't feel any acceleration. The strength of a torque spring is marked on the spring itself so you won't have any...
Reference: 90159-06822-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: STR-667.10
Brand: Str8
Please note that you will need 1 resistor per side.
Reference: 527880
Brand: Malossi
Very durable high quality clutch with three shoes and large linings. It is also equipped with several lock-in positions that allow for adjusting spring preload, which takes a bit of skill and strength, though. A great choice for high end engines.
Reference: 32102
Brand: Scootertuning.ca
Cylinder cover for air cooled vertical Minarelli engines. This is an essential part of the cooling system on air cooled bikes, if you cover is missing or damaged, this could result in overheating.
Reference: 3711163
Brand: Malossi
Replacement parts for Malossi MHR Overrange variator.
Reference: 203.0132
Brand: Polini
Polini air filter element having a two-layer foam, allows the maximum filtration efficiency with optimum performance. The Double Layer air filter is suitable for Minarelli upright.
Reference: SIN-IP1
Brand: Sinto
The synthetic oil Performa provides maximum performance and protection of 2-stroke engines. The unique formulation maximizes engine performance and effectively control the accumulation of deposits in the engine and exhaust system. Low smoke emissions and pleasant grape odor. High quality synthetic oil. Easy starting. Extends engine life. Operates in...
Reference: 1000-126
Brand: NCY
High quality, forged brake caliper from NCY. This two piston caliper is a great upgrade over the single piston calipers that are standard on most Jog and Minarelli scooters. Not only do you get better stopping power with this caliper, there are also many more brake pad compound options available.
Reference: STR-687.12/BT
Brand: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: MF96.90037
Brand: Motoforce
Banjo bolt for master cylinder units and brake calipers with M10x1.25 threads. NOTE: Don’t forget to check the thread size!
Reference: 3XG-E5317-00-00
Brand: Yamaha
Yamaha OEM replacement part. Long tube used to hold the engine in place. Has to be combined with 2x 99009-17400 circlips to be centered.
Reference: S6-50ET012
Brand: Stage6
Stage6 Screw Set for "Torque Control" clutch shoe Minarelli/Piaggio/Peugeot. Spare screws for attaching clutch shoe. for 1 clutch shoe
Reference: SCT-LS001/AL
Brand: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in with this shock.
Reference: RW-004
Brand: Rolling Wrench
This Rolling Wrench Beast mode EFI fuel tuner is just what you need when it comes to tuning your factory equipped fuel injected Zuma. This plugs into your stock harness. It will allow you to change the air fuel ratio (AFR) with the push of a few button. That sure beats taking your carburetor out multiple times like the old days :-). This unit will work...
Reference: S6-802020
Brand: Stage6
High quality silver small end bearing from Stage6. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. Attention: Cannot be used with Malossi and Stage6 cranks, only original crankshafts!
Reference: 33226
Brand: Scootertuning.ca
Universal choke lever with cable.
Reference: IP12108
Brand: Scootertuning.ca
Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this part becomes defective and is not replaced in time, it could cause damage to the starter.
Reference: 3611632
Brand: Malossi
Replacement piston circlip for the Piaggio 4T.
Reference: 33240
Brand: Tun'R
Tun'r Mirror adaptor M8 to M10, M10 to M8 with standard or reverse thread.
Reference: BM11212
Brand: Scootertuning.ca
Inexpensive replacement brake lever for PGO and genuine Scooter.
Reference: CR7HIX
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning features than common CU...
Reference: P400485850002
Brand: Athena
Athena offers the most complete range of gaskets and gasket sets for every make and model of motorcycles, jet-ski, snow-mobiles and outboards in the world. The quality of our gaskets replaces and exceeds the seal offered by the original products. Our long time experience gained in supplying most prestigious OEM Motorcycle manufacturers, has brought to our...
Reference: 069603/1
Brand: Athena
Replacement Athena Sporting gasket set 70cc - Kymco/Sym upright
Reference: 209.0225
Brand: Polini
This is the complete gasket set for original for Polini sport,corsa,alu and evolution 70cc cylinders. Check the picture to see which gaskets are included.
Reference: VC18616
Brand: Scootertuning.ca
Replacement speedometer cable in original dimensions for MBK Booster and Yamaha BWs 50 scooters. Design and dual-side mounts match the original scooter speedo cable. Length from end to end: 90.5cm. Replaces OEM-No.: 72900N0HP000 / 4PAH35500200 Also suitable for the following models: KEEWAY 250 SUPERSHADOW 06=> MBK 50 BOOSTER SPIRIT EURO2 03 YAMAHA 50...
Reference: PREM06
Brand: MVT
The MVT Premium ignition may well be one of the most advanced ones on the market. It is the first "real" inner rotor ignition with lighting coil as it makes it possible to supply the complete electrical system of a scoot with power whereas other manufacturers such as Polini so far have only offered ignitions with variable voltage that allows for using the...
Reference: 558132
Brand: Malossi
The continuous development of electronics in the automotive segment led Malossi to the creation and marketing of a complete line of electronic coils for scooters to be used on the street and for races which is at the highest level of technology. Each electronic coil model was expressly studied for the scooter it will be fitted on, and this is the reason...