No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Yasuni's Carrera range consists of...
Reference: ST-LOWFK-AL
Brand: Ruckhouse
We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...
Reference: VC24950
Brand: Scootertuning.ca
Good quality replacement drive belt for Honda Zoomer, Ruckus und Metropolitan 50cc scooters. Dimensions: 797x18
Reference: 187547
Brand: Teknix
An original type belt, ideal in case of wear or breakage for the replacement of your old belt.
Reference: 200.0319
Brand: Polini
The Polini Speed is an unobtrusive sport exhaust with European homologation. It’s completely made of steel, painted in matt black, and equipped with a heat shield. Like comparable touring pipes, it is suitable and offer good performance with original or 70cc sport engines. All parts necessary for mounting are included in the delivery. NOTE: Like other...
Reference: 3B3-E7641-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK201.14
Brand: Naraku
The Naraku Big Valve manifold V.2 with large double racing reed block. For upright Peugeot, Kymco, SYM or Honda engines. With this intake system and a 19mm or above carburettor, you can get the most out of your engine! The intake system has a vacuum port. It is recommended for conversions to pre-mix lubrication. Comes as shown with fixings, reed valves,...
Reference: 118287
Brand: Malossi
This is the complete gasket set for 70cc Malossi Sport/MHR replica cylinder kit. Check the picture to see which gaskets are included.
Reference: HUBYW50
Brand: Scootertuning.ca
Finally available! Rear Bws/Zuma 50 2002-2011 hub that allow to use Douglas 4x110 wheel or Aerox, Stage6, Kiesler, Gyronetics and all 3 holes rims with 3x80mm bolt pattern.The bolt size is M10 x 1.5 and the length depends on the wheel thickness.
Reference: S6-0530/S
Brand: Stage6
Rare Stage6 R/T Breed of Speed sticker that was previously only available on trade fairs and other events. Transparent foil with white or black print.
Reference: 4518
Brand: Doppler
Doppler offer here aluminium handlebar stem for 22mm handlebar. Available in a wide color selection.
Reference: 215.0441
Brand: Polini
Polini also offer a two-part intake manifold, consisting of a base plate and a flexible, angled rubber part, which will be squeezed between base plate and engine intake. The manifolds come with different passage and union diameters and are available for all common Dellorto, PWK, Mikuni and Keihin carburettors.
Reference: 28822
Brand: Scootertuning.ca
Steering head bearing set complete with bearing cups and bearings for steering column top and bottom. Steering bearings should be replaced when a yoke is fitted or when you notice play, tightness or knocking on the front end, during normal operation, it will result in a "floating" feel. Often the driver feels nothing of the creeping defect in stock. Only...
Reference: STR-655.21/CE
Brand: Str8
This universal rear light is homologated and offers the chance to fit a popular LED version including indicators in case of fairing work or if you don't want to keep the original lamp. Dimensions: 15 x 8.5 cm.
Reference: 329356
Brand: Tun'R
Tun'r offer here Chrome rear bumber for Bwsr and Zuma Build before 2003.It might be required to grind off 2-3mm of material to make it fit, based on a customer review.
Reference: 273547BK
Brand: Malossi
Malossi carbon reeds for the original valve. Carbon reeds allow for changing the engine characteristics. Thin reeds - better acceleration. Thick reeds - better performance at high revs. Another advantage: while steel reeds can break, causing catastrophic damage to the engine's innards, this won't happen so easily with carbon reeds. 0.30 / 0.35m
Reference: NK200.22
Brand: Naraku
Set of 12 Naraku Gurtner main jets. Comes with 12 jets in 0.02mm increments. Set contains 74-96.
Reference: BR10EIX
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning features than common CU...
Reference: S410000999001
Brand: Athena
Athena Super-Silent fiberglass packing material with good temperature resistant properties. For noise reduction and longevity of the packing material, quantity (and therefore density) is of prior importance. The wool does not come as one firm mat, so you can extract exactly as much wool as you need, and packing the silencer is easier. Please note: If the...
Reference: 316405
Brand: Malossi
Malossi Sport 70cc strong torque cast iron cylinder kit with robust piston and 2 rings for the Honda Vision scooter and Peugeot Rapido. Easy to tune and original carb and exhaust system can be used however a 17.5mm and sports exhaust such as Leovince exhausts would complement this kit nicely. Ideal for inexperienced tuners. Supplied with all necessary...
Reference: NK101.70
Brand: Naraku
Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.
Reference: KO-KI000R14
Brand: Koso
Temperature sensors allow to measure the cylinder temperature of air-cooled engines via the Koso Pro Multimeter. Ring simply bolts under the sparkplug. Comes with 5 replacement rings.
Reference: 3XG-E5371-00-00
Brand: Yamaha
Yamaha OEM replacement part. Small white breather that releases pressure from the gearbox.
Reference: 9929330
Brand: Top performances
This is the complete gasket set for 77/86cc Top Performances TPR cylinder kit. Check the picture to see which gaskets are included.
Reference: 0900-1075.5
Brand: NCY
Bring your scooter to the 21st Century! NCY's Coil-on-Plug ignition system provides 10kV more per spark and optimum timing precision over a conventional HT lead. The build quality on this is second-to-none! Features: Hotter Spark, Cleaner Burns=less smoke (especially 2T), Quicker Acceleration, Higher Top-Speeds and Engine Eye-Candy. Overall, you will see...
Reference: 203.0114
Brand: Polini
We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: 5PJ-F6311-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: TRS-CWD119/
Brand: TRS
Complete Billet Washer and bolt kit for your Honda Ruckus / Zoomer . This kit consists of 50 pieces CHOOSE FROM BLACK, RED OR RAW (RAW CAN BE POLISHED) Made right here in the USA with US MADE bolts and Anodized Here too.
Reference: GW004
Brand: Scootertuning.ca
Front fairing GW gen 2 made with Carbon Fiber. This will give a nice agressive style to your Bws/Zuma. Attention! Halogen lamp and bracket are not included.
Reference: TUB306
Brand: Yasuni
The Yasuni Z from the Spanish manufacturer Yasuni is an absolutely high performance exhaust when combined with 50cc and 70cc sport cylinders. Good performance and amazing sound. This exhaust is equipped with a classy Aluminium silencer, but also available with the following silencer : Aluminium Black, Carbon and Carbon Kevlar. You just have to choose...
Reference: SCT-GB0012
Brand: Scootertuning.ca
Reference: 375558
Brand: Teknix
If your airbox is damaged or you simply want to change the look of it - here's a Tun'R Air Filter Box black MBK Booster / BW'S before 2004, as always at an excellent price! OEM quality, meaning it is basically identical to the original box and can simply replace it.
Reference: IP24862
Brand: Scootertuning.ca
High quality NTN SC04A47CS32PX1 C3 Deep groove ball bearing. Internal diameter 20mm, external diameter 52mm, thickness 12mm.
Reference: DIO-BSPG
Brand: Taida
Taida Crankshaft bearing set for honda Dio with AF16 engine. The kit consist of 2 bearings with 2 oil seals.