Top sellers

• 

  CAD$ 999.99 Out of stock

  Reference: TRT-52RC1

  Brand: 2Fast

  

  Cylinder kit 2Fast FL100R (V2) RC-ONE / P.R.E (Flanged Mount)

  Looking for something very powerfull? Here is the 2Fast 100cc directly designed for the Malossi RC-One crankcase. Need to be used in conjuction with 47mm stoke/100mm conrod 2Fast cranskshaft. 2Fast 100cc exhaust sytem is also available!

  CAD$ 999.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 129.99 In stock

  Reference: 5111561

  Brand: Malossi

  

  Variator Malossi Multivar Aprilia SR50 Morini

  The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package are a torque spring and a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wider range.

  CAD$ 129.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 60.99 In stock

  Reference: 33-708

  Brand: Durabatt

  

  Battery Durabatt YTX7L-BS GEL (Canada only - No INTL Shipping)

  Made using nanotechnology gel electrolyte. Leak proof, even with a broken container, due to gel consistency. Extends battery life up to 150%. Double the shelf life of an acid battery. The electrolyte is added at the factory, so there’s no need to add acid to this battery.

  CAD$ 60.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 2.99 In stock

  Reference: SCT-PA012

  Brand: Scootertuning.ca

  

  Patch Scooter Tuning Long Black/White

  CAD$ 2.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 11.99 Out of stock

  Reference: 99009-19400-00

  Brand: Yamaha

  

  Oil pump drive Circlip (Bws/Zuma 2002-2011)

  Yamaha OEM replacement part. Circlip used to hold the oil pump drive gear in place.

  CAD$ 11.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 99.99 Out of stock

  Reference: A366958

  Brand: Tun'R

  

  Knee Cover Tun'r White Bws'r-Zuma 88-01

  CAD$ 99.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 86.99 In stock

  Reference: BM01720

  Brand: Scootertuning.ca

  

  Front Fairing PGO Bigmax Black

  CAD$ 86.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 188.99 In stock

  Reference: 1100-1254.5

  Brand: NCY

  

  2V Cylinder head NCY Oversize 171cc for GY6 125-150cc

  Valve Size: Intake-27.5, Exhaust-23.5. This head will allow your cylinder to breathe better! Works great with our 61mm cylinder assembly. See below for dyno results. And you're wondering how can this get even better, right? Check out these Stainless Steel racing Valves to go with your new top end. When changing a cylinder kit or an exhaust, it's a good...

  CAD$ 188.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 43.99 In stock

  Reference: TRS-AFC99/BK

  Brand: TRS

  

  Aluminium Frame Cap TRS Black Honda Ruckus

  Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly bolts, and give the bike a really awesome look! Caps come raw, anodized red, anodized black or anodized black...

  CAD$ 43.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: SCT-GA005

  Brand: Scootertuning.ca

  

  Gasket set 50cc Minarelli Horizontal AC

  This is the complete gasket set for original or 50cc replacement cylinders. Check the picture to see which gaskets are included.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 19.99 In stock

  Reference: GY14635

  Brand: Scootertuning.ca

  

  CDI Unit (AC) Restricted GY6 50-150cc

  Standard CDI ignition unit as factory-fitted.

  CAD$ 19.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 6.99 In stock

  Reference: IP13255

  Brand: Scootertuning.ca

  

  Variator backplate sliders set of 3 pcs GY6 50cc

  Set of 3 replacement sliding shoes for variator plates.

  CAD$ 6.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 35.99 Out of stock

  Reference: RH-042

  Brand: Ruckhouse

  

  Lug Nuts Ruckhouse Black

  CAD$ 35.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 73.99 Out of stock

  Reference: FLP-005

  Brand: FLP

  

  Billet Step Rails FLP Lusso CNC Aluminium Honda Ruckus

  Our newest edition to our Lusso line up. Billet side rails with open pockets to show case you nee paint and contrast the CNC machined aluminum. 3/8 risers are included to slightly lift the rails so you don’t scratch your tank. These do clear the new ncy gas tank covers

  CAD$ 73.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 84.99 In stock

  Reference: 0400-1007.10

  Brand: NCY

  

  Adjustable Seat kit NCY Aluminium Honda Ruckus

  Move your seat further back for a more comfortable riding position with this NCY adjustable seat kit. Adjust the seat back 4cm, 7cm or 10cm

  CAD$ 84.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: MF99.00106

  Brand: Motoforce

  

  Tire mounting set Motoforce 200mm (3pcs)

  A set of 3 levers from Motoforce; necessary to install and remove tyres.

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 759.99 In stock

  Reference: TRT-1004

  Brand: 2Fast

  

  Cylinder kit 2Fast 100cc Minarelli Horizontal LC

  You've heard about 100cc 2Fast kit but never seen on a shop? Yes, because so far it does not exist. Several racers have the modified 94cc kit with longer stroke. This model is simply taken on the same base but with more material for optimal mounting with displacement of 100cc. Need to be used in conjuction with 47mm stoke/95mm conrod 2Fast cranskshaft....

  CAD$ 759.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 179.99 Out of stock

  Reference: MS-PKMMXS010/1

  Brand: MXS Racing

  

  Intake system MXS Racing HighFlow (35mm) Minarelli Vertical

  CAD$ 179.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: NK201.23

  Brand: Naraku

  

  Repair Kit Naraku for PHBG (19-21mm)

  Naraku carburettor repair kit for PHBG carbs.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 In stock

  Reference: KH-ET-2B

  Brand: Motoforce

  

  Manual choke adaptor for Motoforce PWK carburettor

  For those models, where it is difficult to get to the choke lever of the PWK carburettors from Motoroforce, this adaptor allows for converting to choke cable. We recommend using a fitting choke cable from Stage6 or Polini.

  CAD$ 9.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 269.99 In stock

  Reference: TRT-BL90M

  Brand: 2Fast

  

  Conrod 2Fast Minarelli 90mm 18x37mm

  Replacement 90mm conrod for 2Fast Crankshaft (90mm)

  CAD$ 269.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: 90202-10120-00

  Brand: Yamaha

  

  Center Stand Pin Washer (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 229.99 Out of stock

  Reference: 69184

  Brand: Aprilia

  

  Fuel Injector Aprilia SR50 Di-Tech

  CAD$ 229.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: 676458

  Brand: Malossi

  

  Primary gear kit Malossi 16/32 (AF05)

  Racing transmission with ratio of +15%. A must for tuned engines. Power alone is not enough, you need to get it to the ground. Not recommended for untuned engines.

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: BT11004

  Brand: Scootertuning.ca

  

  Starter bendix gear GY6 50cc 139QMB/QMA

  The starter clutch creates the link between the starter and the crankshaft. The clutch secures the components if the motor is turned on and the engine revs are more than the starter motor revs. Crunching and knocking when starting often point towards a problem with the clutch. Leaving it could cause major damage to the engine cases. Suitable for all 139...

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 75.99 In stock

  Reference: NK900.59

  Brand: Naraku

  

  Front pulley Naraku HS-CNC V2 GY6 50cc

  V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and carrier star him. (Fig. 2), the edge angle was revised again and combines a little more top speed with sufficient power. The CNC-machined running surface of the disc allows for a clean, low-vibration belt...

  CAD$ 75.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 120.99 In stock

  Reference: NK201.04

  Brand: Naraku

  

  Carburetor Naraku 17.5mm (Genuine-PGO-Kymco)

  Good quality 17.5mm carb from Naraku for Kymco, Honda and Sym scooters which is identical to the Dellorto L-DEL1438 carburettor. Recommended for un-tuned engines as is a much better than the original 12mm or 14mm carburettors fitted as standard (EU models) , non EU models come with a 17.5mm as standard so this carb is a perfect replacement. Original air...

  CAD$ 120.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 In stock

  Reference: 19738

  Brand: Scootertuning.ca

  

  Bulb BA20D (12V-25/25W)

  Replacement front headlight bulb for two-wheeled vehicles as well as quads/ATV’s with BA20d base. 12V bulb with 25/25W. Please check your item against the image for added assurance.

  CAD$ 9.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 20.99 Out of stock

  Reference: S6-802050

  Brand: Stage6

  

  Small end bearing Stage6 12x16x13mm (CPI-Vento-Keeway)

  High quality silver small end bearing from Stage6 for many common engines. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. In addition to the common sizes, we also offer an extra-wide 10mm bearing. With some cylinder kits, the bearing has too much play and may wear unevenly....

  CAD$ 20.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 809.99 In stock

  Reference: 9926560

  Brand: Top performances

  

  Cylinder Package TPR 86cc 12mm Minarelli Horizontal LC

  86cc Big Bore cylinder available for a very good price! With an excellent reputation, Top Performances came up with this 86cc Aluminium Tuning Kit for scooters with horizontal Minarelli LC engines. The cylinder is made of Nikasil-plated aluminium with a 50mm diameter, has 6 transfer ports, a bridged exhaust port and a modular high compression cylinder...

  CAD$ 809.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 169.99 In stock

  Reference: MVT-RJ34/63

  Brand: MVT

  

  CDI Unit MVT Digital Direct (DD06)

  Replacement CDI for MVT Digital Direct ignition. The advantage of the Digital direct CDI is the variable ignition curve not offered on the MVT premium, meaning that ignition advance is rev-dependent in order to max out performance at all RPM. Can be used as improve on the Premium (PREM06) Ignition.

  CAD$ 169.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 Out of stock

  Reference: VCR-RD13.FILT48/RE

  Brand: Voca

  

  Air filter Voca Racing Red (48mm)

  VOCA Racing double-layer air filter. The new very performing VOCA Racing air filter are manufactured of high quality materials only. Tecnically this new filter is based on a doble layer system. The VOCA race filter has been developed for big carburetors such as KEIHIN PWK and VOCA FT. Connection d.= 48mm. The VOCA Race Filter comes with a stright and a...

  CAD$ 42.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 14.99 Available in 4-20 days

  Reference: VC19047

  Brand: Scootertuning.ca

  

  Front brake pad (CPI / Hyosung)

  Organic compound scooter brake pads, often used as factory-fitted items. Replacement pads that are good value for money. FA083 MCB519 DB2060

  CAD$ 14.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 27.99 In stock

  Reference: NK200.05

  Brand: Naraku

  

  Electric choke Naraku for GY6 125-180cc

  Naraku electrical choke for all Chinese-built 4-stroke carburettors on Kymco, Peugeot, Piaggio, Yamaha and MBK. The choke can simply be swapped with the original. Also fits Dellorto and Arreche tuned carbs. Delivery as shown. Diameter choke piston: 7mm

  CAD$ 27.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 150.99 Out of stock

  Reference: TRS-FLCL6353000

  Brand: TRS

  

  Front Light TRS Cree Led 6'' 35W 3000 Lumes Honda Ruckus

  Comes with Powercoated matte black brackets. NOT a 1 piece bracket. 2 piece bracket allows for better installation and bracket not warpping. Works on both GY6 and Honda Ruckus. Please see installation instructions for more informations!

  CAD$ 150.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 92.99 In stock

  Reference: TRS-BCBL/BK

  Brand: TRS

  

  Billet CNC Short Brake Levers TRS Black Honda Ruckus

  have drum brakes? want that custom look. we got you covered. billet 6160 short levers for the honda ruckus / zoomer / metropolitan. allows the use of brake lock and both switches. Choose either black or raw finish.

  CAD$ 92.99

  Add to cart More

  In stock

  Add to Compare