No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Sunworld PWK carburettor is a very...
Reference: 81130-GEZ-691ZA
Brand: Honda
Replacement OEM Honda Parts.
Reference: MOT104112
Brand: Motul
100% Synthetic • 4-stroke competition lubricant • Double Ester technology, developed for the leading factory teams Lower friction for increase power Exceptional lm strength to protect the engine and gear box • Perfect for oil wet clutches • Exceeds JASO MA • Standards: Above existing standards
Reference: KL-100
Brand: Klotz
Contains 80% Original TechniPlate synthetic lubricant and 20% BeNOL Racing Castor lubricant Improves throttle response Extreme film strength protects engine parts from metal-to-metal contact Clean Burn for low smoke and helps prevent plug fouling Identifiable Klotz red color...Smells like Klotz Blends with methanol, ethanol, nitromethane, gasoline and...
Reference: BT12010
Brand: Scootertuning.ca
Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting issues can be traced to the kick-start. 2 different versions with either 7 or 8 teeth are currently used. This version is the 7-tooth version. Please check product image and compare to original part.
Reference: S41PLAT058
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: NK100.81
Brand: Naraku
Naraku crankshaft in OEM-quality to match Japanese and Taiwanese alternatives. Kitted with high quality, heavy duty quality bearings which allows for longer service life and durability, far superior to low cost Chinese cranks. The quality is reflected in the price, but nothing is gained from using cheap parts, there is nothing more annoying than pushing...
Reference: 3113243
Brand: Malossi
Malossi BigBore cylinder with 52mm bore in aluminium with hard chromed liner. The bore = 87.9cc capacity. Original head may be retained according to the manufacturer, but only super unleaded should be used due to the compression ratio. Solid 4-stroke cylinder made in Europe.Delivery includes all necessary parts. Also suitable for Chinese-built 4-stroke...
Reference: SCT-1281245
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Screws are NOT included!
Reference: 0300-0012.10
Brand: NCY
Stretch the rear end of your Honda Ruckus / Zoomer 6.5 inches with the NCY Billet Aluminum Frame Extension Kit! This can only be described as the cleanest Frame Extension kit on the market to date. We went out of our way to design an extension kit that flows with the form of the Honda Ruckus scooter. The NCY billet Aluminum Frame Extension kit is...
Reference: AT-P001/B
Brand: Athena
Complete engine package for Yamaha Bws 2002-2011. Package include Cylinder kit Athena Sporting 70cc, Variator Malossi Multivar, Exhaust Yasuni R, Main jet set Stage6 80-102 6mm, Spark plug BR9HS, Malossi 16x13 roller 7g and Malossi medium torque spring.
Reference: SCT-HCCP1232
Brand: Ruckhouse
These are for our 4/110 wheels. They sandwich between the wheel and your hub for the perfect fit. You won’t be losing this baby down the street. The flange on the outside is only .075 thick so don’t worry about your wheel not lining up. It will probably help line it up better since most mounts on the market hold your engine too far to the left.
Reference: 277830
Brand: Doppler
Doppler S2R intake pipe for Minarelli Vertical with 23mm connection (Dellorto 12-21mm carburettor)
Reference: 2019248
Brand: Malossi
Replacement parts for Malossi MHR Overrange variator. ONLY FIT ON 2013 VARIATOR MODEL
Reference: S6-5616615
Brand: Stage6
The Stage6 Oversize CVT. Different from conventional torque drivers that are manufactured from steel, this part consists of forged aluminium halves that are screwed to a guide piece. The halves have been CNC-machined, which guarantees high precision, especially of the surface angle. Special attention has been paid to ensure an ideal surface roughness, as...
Reference: 90387-108S0-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1DN-H3922-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 93102-17807-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK390.04
Brand: Naraku
Naraku unrestricted tuning CDI. Opens up the engines rev potential. Simply swap for the original without messing with wiring. Only for use where a sports variator or racing sleeve is present (e.g. Polini Hi-Speed).
Reference: IP21377
Brand: Scootertuning.ca
Replacement, good quality starter motor for 50cc scooters from Aprilia (with Aprilia engines), Suzuki, TGB, Italjet, as well as Morini. Starter motor supplied ready to install. Performance matches the original item.
Reference: 3601-0562
Brand: Ipone
SCOOT 4 ensures optimum lubrication of your 4-stroke scooter. Semi-synthetic, it guarantees good engine protection. Its FUEL ECO formula allows you to save fuel.
Reference: SCT-TL001
Brand: Ruckhouse
Flexible tail light (running light, brake light, left and right blinker) than can be used on any 12V system. Must replace the flasher relay for a LED relay for this item to work!Day light - 1W / Brake light - 4W / turn signals - 2WBlack - GroundRed - Day lightWhite - Brake lightBlue - Left blinkerGreen - Right blinker
Reference: 204.0935
Brand: Polini
Replacement piston for the Polini Big evolution 84/94cc kits
Reference: VC23457
Brand: Scootertuning.ca
Lens tail light with beautiful reflector. Comes with bulb and everything, just wire up and go.
Reference: MF99.00804
Brand: Motoforce
You can see that your cylinder is still in good shape from the crosshatch pattern on the cylinder liner. However, this pattern will fade after a while, which makes refinishing the cylinder necessary. Another reason for honing may be a seize-up that scores the bore surface. Any well-equipped toolbox should definitely include a honing tool.
Reference: NK101.73
Brand: Naraku
Naraku small end bearing [HD-Quality] - 12x16x13. Suitable for Minarelli and CPI, Generic, Keeway, Chinese-built 2-stroke engines with 12mm gudgeon pin.
Reference: KO-BF030000
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.
Reference: KO-KI0001R10
Brand: Koso
Temperature sensors allow to measure the cylinder temperature of air-cooled engines via the Koso Pro Multimeter and Stage6 gauge. Ring simply bolts under the sparkplug. Comes with 5 replacement rings.
Reference: P400485100089
Brand: Athena
Athena is pleased to announce an absolute novelty in the world of air cooled vertical Yamaha-Minarelli engines and therefore for legendary applications such as MBK Booster / Yamaha BW’s or the iconic Aprilia SR*. With this brand new big bore cylinder kit, Athena R&D department brings on this cylinder technical solutions usually applied only on high...
Reference: 0800-1138 BLACK
Brand: NCY
These beautiful 22mm Aluminum Grip Sets from NCY come in a variety of colors, so you can express yourself and give your scooter a little color! We brought these in for the Honda Ruckus, but they'll work great on any scooter.
Reference: S6-45ET016
Brand: Stage6
Spare part for the Stage6 MK2 internal rotor ignition. Can also be used for the MK1 internal rotor ignition and other PVL ignitions. The CDI is preloaded with the latest 2 ignition curves from Stage6. Plug & Play for those who don't want to deal with the programming function. CDI WITH VARIOUS OPTION The Stage6 R/T CDI offers you 3 options: Option 1:...
Reference: 202.1346
Brand: Polini
Secondary gear for Aprilia, Benelli, CPI, Italjet, Malaguti, MBK, Yamaha from heritage brand Polini.
Reference: P400000680016
Brand: Athena
Athena offers a 28mm PWK carburetor suitable as a universal replacement for all motorcycles. Even the most demanding user will therefore be able to achieve the perfect combination in the dosage of the air-petrol mixture at all power delivery regimes. The carburetor ensures greater acceleration and recovery in departures, also improving the draw at maximum...
Reference: 1CD-F1721-00-P0
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5SU-F6280-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.