No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Replacement OEM Yamaha parts.
Reference: HL-003
Brand: Hotlap
All pipes are handmade in Japan by HotLap. The headers and exhaust canisters are built specifically for the Honda Ruckus and built from scratch. They are not reworked headers/pipes like some of the competitors’ options. Very clean with beautiful welds; everything is bent to perfection (no pie cuts to go cracking on you!). Also note every pipe comes with a...
Reference: GY14655
Brand: Scootertuning.ca
Primary gear shaft for Chinese 125/150cc scooters with the 152/157QMI engine. This is where the clutch is mounted. This gear has 15 teeth as per original item.
Reference: NK600.08
Brand: Naraku
These sets contain all the necessary gaskets from the cylinder base upwards. These can be used on Naraku 4-stroke cylinders (NK600.08). Please note: If purchasing this kit for the Sym 125cc scooters, please ensure your engine is the GY6 version (cylinder head stud holes have a distance of 63mm hole to hole, outside to outside measurement).
Reference: GY6-T-100
Brand: Taida
Taida Racing Camshaft (6.4/6.3) for sports and racing cylinders. This camshaft will offer great improve at low and middle RPM. Suitable for 125/150cc scooters, quads etc. with GY6 engines. This is the T-100 medium version. The T-300 and T-One High rev version are also available. Lift : IN 19.8/26.2 – EX 19.8/26.1
Reference: NK600.52
Brand: Naraku
Complete cylinder kit with all gaskets and small parts for fitting. This 150cc Naraku cylinder yields engine performance corresponding to the original cylinder of 150cc GY6 and Kymco AC engines. Thus ideal as an inexpensive replacement for a defective original cylinder. The cylinder kit can also be used to increase the performance of 125cc GY6 and Kymco...
Reference: GY6-030
Brand: Taida
Taida Racing crankshaft with standard 57.8mm stroke. This crankshaft allow to use performance cylinder kit from 150 to 180cc without any issue.
Reference: HL-006
Brand: Hotlap
We worked directly with Hotlap to develop EVEN MORE exclusive GY6 options that you cannot get anywhere else; all with that same HotLap quality. These unique design options allow you to select a style best suited for your own bike, and built specifically for the GY6 with the signature HOTLAP quality. Nice deep growl! This pipe is compatible with 150 and...
Reference: HL-005
Brand: Hotlap
We worked directly with Hotlap to develop EVEN MORE exclusive GY6 options that you cannot get anywhere else; all with that same HotLap quality. These unique design options allow you to select a style best suited for your own bike, and built specifically for the GY6 with the signature HOTLAP quality. Nice deep growl! This pipe is compatible with 150 and...
Reference: 347PLUG
Brand: Yoshimura
We know you take pride in your vehicle and meticulously clean it after every ride, we do too. Our mufflers need care too and keeping water out of the muffler while washing your vehicle is an important step to maintaining the longevity of your muffler and exhaust system.
Reference: TRS-SSC31/BK
Brand: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: GY16360
Brand: Scootertuning.ca
Mid-crankcase gasket for GY6 125/150cc engines.
Reference: RH-004
Brand: Ruckhouse
Reference: VCR-RD18144
Brand: Voca
Voca has developped this brake caliper adaptor for use Stage6 R/T 4 pistons caliper on Marzocchi forks with 210 or 220mm disc brake. With other pitbike model, due to the position of the disk (larger diameter), you may need to make modification for using the Stage6 caliper. The clamp includes a kit of shims, with which we can adjust the clamp to different...
Reference: VCR-RD13PB.28
Brand: Voca
The first range of Voca Racing carburettors. Carburettors round bell designed to be mounted on Pitbikes 150 / 160cc 4T. With manual choke. Available in 26 and 28mm. Voca has worked with his competition team for achieve a carburettor that work best. 33mm Intake connection / 47mm airfilter connection.
Reference: CH-1026/M-BK
Brand: Chimera
Reference: 318455
Brand: Malossi
Malossi’s powerful racing cylinder. Bore 47.6mm, 6 transfer ports. This Nikasil-coated aluminium cylinder is the “little brother” of the MHR Team. Cylinder can be used with any good racing crankshaft (e.g. Stage6, Hebo, Malossi MHR, Polini...)
Reference: 248.044
Brand: Polini
This belt features an aramid weave that makes it elastic and highly durable. Without doubt, one of the best v-belts in our range. Polini quality, made in Italy. Dimensions: 738*18.5*28
Reference: 140.0202
Brand: Polini
The 79cc Sport is a high-torque cylinder with excellent acceleration, ideal for daily use. The performance is mainly due to the increase in capacity, which makes for a reliable cylinder. Comes with all gaskets etc. needed for installation.
Reference: 213.0055
Brand: Polini
The Big Evolution reed valve from Polini is a big valve reed block with larger intake area. It's a two-piece design with CNC-machined, anodised fixing plate. Comes with 0.3mm thick carbon reeds. In order to use this valve, you will have to open the engine block to a width of 39.5mm. Optimised for 24mm to 28mm carburettors. Attention: due to the increased...
Reference: MF28.14005
Brand: Motoforce
Reproduction of the stock cylinder head. May be used to replace a faulty original part or to complete the Motoforce, RMS or Olympia cylinder replacement kits.
Reference: 204.0840
Brand: Polini
Replacement piston for the Polini sport 70cc cylinder kits
Reference: TH10BGY6125-2000
Brand: Scootertuning.ca
Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...
Reference: 250.011
Brand: Polini
Polini Speed Clutch Bell. Better design than most original clutches and thus an ideal replacement for died down or misshapen originals.
Reference: 1417226
Brand: Malossi
For original filter box. Self-extinguishing, expanding polyurethane filter elements with an increased air and filtering capacity, designed for sporting applications. You can recognise Red Sponge immediately by its distinctive Malossi red colour and the yellow trademark. Characteristics: Increased thickness with calculated porosity. Optimum filtering...
Reference: 2213069B
Brand: Malossi
Reference: MF99.20100
Brand: Motoforce
This transparent box comes in handy to store small parts that tend to disappear somewhere, such as main jets, roller weights, clutch springs etc. Six dividers can be freely placed to allow for individual arrangement. Dimensions: 137 x 137 x 30mm
Reference: MVT-PLA09
Brand: MVT
Reference: S6-0534/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: A366200
Brand: Scootertuning.ca
Reference: DFT002184CAR
Brand: Tun'R
Reference: FACEAVANT01102
Brand: Bcd
With the RX series of BCD, you can give your BW's and Boosters a new, unique style. Not only do these parts look hot, they also come in a perfect finish. Attention! To install on Bws'R, you will need all fairing of european booster 2004+.
Reference: MF28.16807
Brand: Motoforce
Cylinder Head OEM quality for replacing original head: Cylinder Head 50cc LC MBK Nitro / Aerox (Minarelli horizontal LC). As an OEM quality part, this cylinder head has the same technical specs as the original head and is compatible with original (or OEM quality) 50cc cylinders.
Reference: 5715844
Brand: Malossi
Great new for 2014! The Piaggio Crankcase Malossi C-ONE. Malossi continues to innovate and design competition parts with very strict specifications. The casing is based on Piaggio motor long type and has been optimized by the Malossi team in their italy workshops. Everything is ready to be mounted with a high racing cylinder assembly like the MHR Team....
Reference: 241.752
Brand: Polini
Polini Hi-Speed Evolution 2 variator for 13mm shaft end for Minarelli. 100% Made in Italy.
Reference: 210.0084
Brand: Polini
Polini For Race HPC crankshaft for Minarelli horizontal scooter engines. Designed to support 50cc and 70cc cylinders, with a reinforced connecting rod to better handle more powerful engines. Perfectly balanced to reduce vibrations and power loss. Heat-treated for increased durability. Recommended for all types of engines, from stock to sport...