No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
Reference: SCT-151-247
Brand: Scootertuning.ca
Rocker Arms for use on heads with 69mm Valves found on 50cc 4-stroke QMB139 engines.
Reference: HL-004
Brand: Hotlap
All pipes are handmade in Japan by HotLap. The headers and exhaust canisters are built specifically for the Honda Ruckus and built from scratch. They are not reworked headers/pipes like some of the competitors’ options. Very clean with beautiful welds; everything is bent to perfection (no pie cuts to go cracking on you!). Also note every pipe comes with a...
Reference: GY14655
Brand: Scootertuning.ca
Primary gear shaft for Chinese 125/150cc scooters with the 152/157QMI engine. This is where the clutch is mounted. This gear has 15 teeth as per original item.
Reference: GY6-ring61
Brand: Taida
Taida Piston rings (61mm / 170cc) 4-stroke for GY6 Engine.
Reference: GY6-cov-2V
Brand: Taida
Taida Quality cylinder head cover for GY6 125-150cc engine.
Reference: NK600.52
Brand: Naraku
Complete cylinder kit with all gaskets and small parts for fitting. This 150cc Naraku cylinder yields engine performance corresponding to the original cylinder of 150cc GY6 and Kymco AC engines. Thus ideal as an inexpensive replacement for a defective original cylinder. The cylinder kit can also be used to increase the performance of 125cc GY6 and Kymco...
Reference: GY6-030
Brand: Taida
Taida Racing crankshaft with standard 57.8mm stroke. This crankshaft allow to use performance cylinder kit from 150 to 180cc without any issue.
Reference: BM01840
Brand: Scootertuning.ca
Replacement front fender for PGO and Genuine Scooter.
Reference: 1000-1320.5
Brand: NCY
Rear 10'' wheel rim for Honda scooters. This is the matching pair to our NCY Front End Kits for Honda Ruckus, and it has the correct hub for your stock drum brake on the rear wheel. This rear rim from NCY completes the total custom look of your disc-brake Ruckus.
Reference: 5113595
Brand: Malossi
The MULTIVAR is a sturdy high-quality variator from Malossi. CAD-designed roller area to give very good acceleration and a wider range.
Reference: STR-251.03/CE
Brand: Str8
We can now introduce the STR8 Mirror Set Street II. The sporty, sleek design is a perfect match for modern scooters and will round off your 2-wheeler's overall look. Despite the size required for homologation the Street II mirrors look smallish and compact.
Reference: CH-1046
Brand: Chimera
Chimera X Factor Foot Rest for Honda Ruckus! Designed to give your Honda Ruckus a whole new look and comfort! The X-Factor Foot Rest allows you to choice to mount foot pegs in two different locations! Towards the front or towards the back! The X-Factor Foot Rest will also provide additional ground clearance for those lowered Ruckuses since the pegs are...
Reference: RPR-BSR/AL
Brand: rPRO
Our newly designed step rails will not work with our foot rest or frame brace. They will work with our Monster Kickers, but spacers are recommended between the step rail and the gas tank cover. Stainless steel gas tank cover is also recommended for this application.
Reference: 005-3740105-S1
Brand: Two Brothers Racing
With a unique bike like the Honda Grom, Two Brothers Racing has designed something special in the S1R exhaust. The innovative carbon fiber S1R exhaust will turn heads with a new design that has been developed to increase the horsepower by 10 percent and reduce weight by 5.5 pounds over the stock exhaust. The S1R is also fitted with a lightweight spiral...
Reference: 241.710
Brand: Polini
The Polini Maxi Hi-Speed variator is one of the strongest variators for Maxi scooters on the market. Emphasis has been placed on the construction of the roller tracks which utilise the existing power band of the engine providing an increase in torque. Variator provides increased acceleration and little more top end speed. Polini variators are excellent...
Reference: S410210320001
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. The perfect part for all sports and Midrace cylinder.
Reference: 140.0202
Brand: Polini
The 79cc Sport is a high-torque cylinder with excellent acceleration, ideal for daily use. The performance is mainly due to the increase in capacity, which makes for a reliable cylinder. Comes with all gaskets etc. needed for installation.
Reference: NK101.26
Brand: Naraku
Replacement piston kit including piston rings, gudgeon pin and circlips for original cylinders and Naraku cylinders. Special molybdenum coating for protecting cylinder and piston during the run-in period.
Reference: 174.2020
Brand: Polini
Polini brake pads stand for high-quality processing & top performance. At the racetrack as well as on the road, reliable & durable braking performance is a must. These highly temperature resistant sintered brake pads come into their own on the racetrack and at high speeds. This Polini brake pad features a KBA certificate (German road legal...
Reference: KW20914
Brand: Scootertuning.ca
Original secondary gear shaft for CPI engines.
Reference: KT00128
Brand: DR
Looking for a bargain-priced durable cylinder for everyday use? If you are willing to use a cylinder with higher capacity, we recommend the 70cc cast-iron cylinder from DR's. Don't let the name "Evolution" fool you though - it has nothing to do with the Polini cylinder of the same name. The DR offers good workmanship, rpms and acceptable performance at a...
Reference: MF28.14005
Brand: Motoforce
Reproduction of the stock cylinder head. May be used to replace a faulty original part or to complete the Motoforce, RMS or Olympia cylinder replacement kits.
Reference: TH10BGY6125-2000
Brand: Scootertuning.ca
Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...
Reference: 250.011
Brand: Polini
Polini Speed Clutch Bell. Better design than most original clutches and thus an ideal replacement for died down or misshapen originals.
Reference: GY14208
Brand: Scootertuning.ca
Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutch unit is the most common cause of cracked belts and makes often advance by humming while driving or judder when starting.This part removed the complicated and trick mounting of the torque spring. Diameter of...
Reference: 1417226
Brand: Malossi
For original filter box. Self-extinguishing, expanding polyurethane filter elements with an increased air and filtering capacity, designed for sporting applications. You can recognise Red Sponge immediately by its distinctive Malossi red colour and the yellow trademark. Characteristics: Increased thickness with calculated porosity. Optimum filtering...
Reference: 2213069B
Brand: Malossi
Reference: VC18929
Brand: Scootertuning.ca
Motorcycle disc lock with 10mm pin for motorcycles and scooters with relevant sized holes. Supplied with pouch and 2 keys. Please check the size of the hole in the disc before ordering, otherwise there is a 5.5mm pin available.
Reference: 23995
Brand: Scootertuning.ca
High Quality Indoor Cover with perfect fit for scooters, motor scooters and smaller scooters. Indoor folding motorcycle cover with softer, breathable. This prevents corrosion and residual moisture . This is especially important during long periods, such as Winter. Suitable for small and medium-sized scooter. This size of Speeds tarpaulin is the...
Reference: MVT-PLA09
Brand: MVT
Reference: MF60.16629
Brand: Motoforce
Replacement Seal Holder
Reference: MF28.16807
Brand: Motoforce
Cylinder Head OEM quality for replacing original head: Cylinder Head 50cc LC MBK Nitro / Aerox (Minarelli horizontal LC). As an OEM quality part, this cylinder head has the same technical specs as the original head and is compatible with original (or OEM quality) 50cc cylinders.
Reference: MOST110082
Brand: Most
After long hours of development in Most factory, here is the exhaust Most Wicked 70cc for Minarelli Vertical! The goal at the beginning of the project was achieved: Compared to these competitors, this exhaust offers a gain of torque and acceleration as we all love! With the couple that gives the Most Wicked, you will keep a better consistency in the...
Reference: RH-150069
Brand: Ruckhouse
Shipment: 3-piece set with 2x 5mm, 1x 2.5mm spacers incl. headset top cap