No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
This is the ignition of the French Champion 2009 in the 80cc class! The...
BLACK SERIES is The Two Brothers...
Viewed products
With this 70cc version, Malossi offers a...
With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an easy-to-adjust, strong sport cylinder. It can also be used with the original carb, as long as the jetting is adjusted.
1 Item
In stock
| Engine Type | Minarelli Horizontal |
| Piston Pin | 10mm |
| Stroke | 39.2mm |
| Displacement | 70cc |
| Conrod Length | 80mm |
| Bore | 47.6mm |
Reference: BR9ES-3194
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: 346172
Brand: Malossi
Replacement piston for the Malossi sport 70cc cylinder kits
Reference: 118287
Brand: Malossi
This is the complete gasket set for 70cc Malossi Sport/MHR replica cylinder kit. Check the picture to see which gaskets are included.
Polini Exhaust Evolution 2 70cc, racing exhaust by renowned Italian...
Some scooters are sent from the factory with two rear shock absorbers. These...
Polini also offer a two-part intake manifold, consisting of a base plate and...
This is what you need to get the flywheel of the ignition off. Unfortunately...
0Replacement studs with M6 thread at both ends, including M6 nuts for use on...
Ideal kit to set up your Polini CP carburetor. 5 pilot jets in a handy...
Reference: S6-7216651
Brand: Stage6
With the 70cc Streetrace grey cast iron cylinder series, Stage6 offers a more...
Reference: 166.0083
Brand: Polini
The Polini Sport 70cc is a very durable high-performance cast iron cylinder...