No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement Polini intake for Yamaha zuma 2002-2011 / Minarelli...
Viewed products
Fitting a big bore kit does not always give the...
View larger
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from well known perfomrance manufacturer Naraku, these gears are longer by 10% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all Chinese 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number of teeth prior to purchase.
This product is no longer in stock
Reference: GY16359
Brand: Scootertuning.ca
Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.
Reference: GY6-BEAR-C
Brand: Taida
Taida gearbox bearing set for 125 and 150cc GY6 engines (152/157QMI).
Reference: GY6-BUSH
Brand: Taida
taida gearbox bushing set for 125 and 150cc gy6 engine (152/157QMI).
High quality, forged brake caliper from NCY. This two piston caliper is a...
Timing chain for GY6 4-stroke engines 152/157 QMI with 125 or 150cc. Chain...
We can offer here complete brake master cylinder and cable lever unit for...
Naraku CNC-machined racing clutch bell for Kymco, Honda and Chinese-built...
This axle spacer kit is to center wheel with aftermarket front hub normally...
Reference: NK901.23
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK900.98
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK901.24
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK900.99
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: GY6-gear1537
Brand: Taida
Taida gears set longer by 20% from the original (14/39 teeth) which will...
Reference: GY6-gear1637
Brand: Taida
Taida gears set longer by 25% from the original (14/39 teeth) which will...
Reference: GY6-gear1736
Brand: Taida
Taida gears set longer by 31% from the original (14/39 teeth) which will...
Reference: GY6-gear1836
Brand: Taida
Taida gears set longer by 35% from the original (14/39 teeth) which will...