No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
Voca offer here Wheels replica of the...
Viewed products
Taida gears set longer by 31% from the original...
View larger
Taida gears set longer by 31% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number of teeth prior to purchase.
In stock
Reference: GY16359
Brand: Scootertuning.ca
Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.
Reference: GY6-BEAR-C
Brand: Taida
Taida gearbox bearing set for 125 and 150cc GY6 engines (152/157QMI).
Reference: GY6-BUSH
Brand: Taida
taida gearbox bushing set for 125 and 150cc gy6 engine (152/157QMI).
NCY intake manifolds offer a smooth bore and larger inlet diameter over...
Our CVT includes a .13″ THICK Stainless Steel ‘backing plate’ to help prevent...
Especially with high-performance engines you should not be too stingy when it...
There aren't that many high-quality mirrors in F1 look on the market, but now...
SPX Inexpensive YTZ7S Battery for scooter.
0Replacement studs with M6 thread at both ends, including M6 nuts for use on...
Reference: NK901.22
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK901.23
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK900.98
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK901.24
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK900.99
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: GY6-gear1537
Brand: Taida
Taida gears set longer by 20% from the original (14/39 teeth) which will...
Reference: GY6-gear1637
Brand: Taida
Taida gears set longer by 25% from the original (14/39 teeth) which will...
Reference: GY6-gear1836
Brand: Taida
Taida gears set longer by 35% from the original (14/39 teeth) which will...