No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: 1100-1435.5
Brand: NCY
NCY 88cc Aluminum Performance Cylinder Head. Great quality alloy cylinder head designed to work seamlessly with 1100-1237 88cc cylinder kit. Give your QMB139 the power to actually get some respect. You can use this cylinder on all QMB139 engines from SYM, Kymco, QLink, Filly 50 as well as other Chinese scooters with the QMB139 engine. Note:Rocker arm...
Reference: RH-075
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Several design available!
Reference: SCT-HJ00114
Brand: Ruckhouse
Genuine Keihin jet kit made for the Honda Ruckus / Metropolitan. Jet kit comes with 38 idle and 78,80,82,85 main. You will never need another jet besides these from our experience.
Reference: TRS-AFB/BK
Brand: TRS
The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,” is a problem created when your Ruckus has a load or the ride height has been adjusted. The engine/rear axle is mounted with 3 points, and since these 3 mounting points are unevenly distributed, the lean or slant...
Reference: 1000-1325.8
Brand: NCY
Front 10'' wheel rim from the NCY front end fork & disc brake kit for Ruckus. Attention! Cannot be used with the OEM drum brake kit, you have to convert your ruckus to front disc brake with new fork, caliper and hydrolic brake master cylinder to use this wheel.
Reference: 0800-1140.5
Brand: NCY
This Honda Ruckus handlebar stand is designed to work with NCY's 28mm (1'' 1/8) Fat Bar Habdlebar.
Reference: TRS-RRE001
Brand: TRS
Looking for a way to run some of the newer 2017 Honda Grom Exhausts with your TRS ‘RaceSets’ Rear Sets? Here is your solution! 3D Machined from 6061 Aluminum, this gives your 2017 Exhaust the mounting point it needs! Comes with Stainless Bolt for mounting Exhaust to the bracket… uses the existing hardware the RaceSets come with for mounting to the brake...
Reference: TRS-FFCG/AL
Brand: TRS
Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive and fit with a perfect fit. It also helps clean up the front end by closing up one of the noticeable gaps in the...
Reference: 99AL47S000
Brand: Top performances
Made from high-strength alloy steel with full plate half-shafts, and balanced with aluminium and tungsten inserts to reduce the harmful spaces in the crank chamber, this special crankshaft has been designed to obtain maximum performance from the SCOOTER PIAGGIO engine. The coupling axis is ? 18 mm and the roller cage has a silver surface treatment. The...
Reference: 99GT52S000
Brand: Top performances
The new aluminium thermal kit represents a performance and technical evolution to increase engine power using a special aluminium alloy for the cylinder, which grants high rigidity even at the highest temperatures caused by intense use. The cylinder barrel is coated with a co-deposit of nickel and carbon silicide assuring utmost reliability and anti-wear...
Reference: HUBYW50FX
Brand: Scootertuning.ca
Reference: SCT-SBM
Brand: Scootertuning.ca
Reference: 366941
Brand: Malossi
High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...
Reference: 669417
Brand: Malossi
The HAT weights are very durable and self lubricating. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)
Reference: IRC01-00
Brand: IRC
IRC high quality dual-Purpose scooter tires that provide good traction on street.
Reference: MF55.150
Brand: Motoforce
Budget weights by Motoforce, choice of weights. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)
Reference: SCT-GA001
Brand: Scootertuning.ca
Replacement reed valve gasket for all Minarelli Horizontal engines.
Reference: SCT-0800
Brand: NCY
In order to offer optimal handling, a dragrace handlebar should be nearly straight. Only the handlebar ends are slightly bent in order to provide the necessary comfort for the wrists. The handlebar may also be shortened according to your requirements.
Reference: BR8HS-4322
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: SCT-GA006
Brand: Scootertuning.ca
We can offer high-quality exhaust gaskets for all common original, sport and racing exhausts
icon
For all order over $199.00
icon
15 days for return
icon
2 days and Overnight
icon
Safe shopping guarantee