No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Super light weight 3.75” round CF...
Viewed products
The NARAKU 50cc cast iron cylinder kit is an...
Replacement OEM Honda Parts.
Black Edition Chimera Engineering Short Ram...
Brake Pads MHR are slower to reach working...
High-quality full-circle crankshaft from...
Good quality replacement cast iron cylinder kit...
View larger
The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those who require a replacement due to cylinder or piston damage. The power output is somewhat higher than on the original barrel. Very good value for money, simple replacement cylinder kit. Supplied with gasket set; the original head is retained. Parts for this kit can be selected from our range. When installing the piston rings, please make sure that the "T" or "J" mark indicating the ring stop of the piston ring is pointing upwards. Otherwise the piston cannot be fitted correctly.
In stock
| Engine Type | Minarelli Horizontal |
| Piston Pin | 10mm |
| Stroke | 39.2mm |
| Displacement | 50cc |
Reference: BR9HS-4522
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: NK101.10
Brand: Naraku
High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Minarelli AC and LC engines. Delivery as shown, including: piston rings, gudgeon pin and circlips. Special molybdenum coating for protecting the cylinder and piston during the run-in period. It is a good rule to change the piston in a 50cc 2-stroke engines after about 6,000...
Reference: NK100.89
Brand: Naraku
These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinders, but are also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
We can offer you this woodruff key from Motoforce in OEM quality. Its...
Complete replacement 24mm carburettor (membrane type) supplied with electric...
150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This...
Clutch springs for sport & racing clutches. Harder clutch springs result...