No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Super light weight 3.75” round CF...
Viewed products
New version available since September 2005....
The Polini Maxi Hi-Speed 9R variator kit uses 9...
Polini Ceramic Air Speed Evolution 3 variator...
The Polini Maxi Hi-Speed variator is one of the...
Replacement variator from Naraku for 50cc...
High-quality oversize racing drive belt with...
View larger
New version available since September 2005. This is the complete kit from the Malossi Hyper Racing (MHR) series. It consists of the complete rear pulleys (fixed and movable halves) contra spring, MHR variator, fixed half of the vario and oversize drive belt. Thanks to the larger rear-pulleys the range of transmission is increased which results in advantages such as better acceleration and better adjustment. Included in the current kit are a newly developed variomatic with 19x15.5mm rollers which allow for smoother engine running and easier adjustment. Attention, this kit can only be used with engines that come with 3-shoe-clutches and a clutch bell with 107mm inner diameter.
In stock
Reference: 0812036
Brand: Malossi
Malossi Minarelli torque corrector spacer set.
Reference: 2011754
Brand: Malossi
A practical kit from Malossi to refurbish the MHR torque corrector bearings. It is suitable for the following parts: Torque corrector Malossi MHR 2005 (619733)Torque corrector Malossi MHR 2013 (6114590)Polini Evolution torque corrector (244.0574)Stage6 R/T Torque Corrector (S6-5616615)2Fast Passion torque corrector (TRT8000)Teknix torque corrector...
Reference: 069854E
Brand: Malossi
Replacemet O-ring set for the MHR Overange 2005 rear pulley.
Reference: 7615375B
Brand: Malossi
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C. MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half...
Nut M10x1mm for the clutch bell on the input shaft. Fits all Minarelli engines.
50cc racing kit, meaning it is more powerful than a 50cc cast iron sports...
Exhaust for Malossi's 70cc MHR kit. Short resonnance length and high quality...
Affordable drive belt from Motoforce Racing in a reinforced Kevlar...
This new small end bearing has been designed specifically for the MHR Team...
Reference: 6118885
Brand: Malossi
Malossi’s overrange kit has been completely revised and now goes under the...