No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Polini also offer a two-part intake...
Viewed products
In time for the 2008 season, Malossi's MHR...
If you install a tuning carburettor the...
white=+1000rpm / black=+1500rpm /...
These Speed-up shims influence the length of...
This is an indispensable tool that you will...
Replacement OEM Yamaha parts.
View larger
In time for the 2008 season, Malossi's MHR Oversize variator received a small, but important makeover. The bushing's diameter was increased from 20 to 22mm and its length was increased, which also required a revision of the ramp plate. The variator itself has been left unchanged. In order to ensure efficient transmission shifts, the oversize variator should be used in conjunction with oversize drive belt and oversize torque driver. Attention: fan pulley no longer included in the delivery! weights: 19x15.5mm
Available in 4-20 days
| Engine Type | Piaggio |
Polini set carburetor idle jets suitable for Keihin PWK carbs.
Silicone bracelet reproducing the famousMalossi K Belt, size 202x12x4mm.
High Quality small end bearings from Doppler now available !
This Polini compression spring increases the force by 8% over the original...
Stylepro 32mm performance intake for PGO scooter! You will can use PWK...
High-quality full-circle crankshaft from Doppler. With this S1R, we can offer...
Reference: S6-5614039
Brand: Stage6
The oversize vario from Stage6 - the optimal complement to the Stage6...
Reference: 241.750
Brand: Polini
This variator works 19x15,5mm in the dimensions of 6 variator rollers. There...